Home > Offers to Sell > Construction & Real Estate > Building Materials > Building Glass
||zhejiang hexin glass Co.,LTD.
||5/9/18 1:16 GMT
8.38mm 10.38mm laminate shower enclosure ,glass canopy ,glass balustrade
HEXIN's tempered glass is the most popular safety glass used that meets uniform
building code standards. the heating and cooling process involved in making
tempered glass produces a product four to five times. stonger than standard
annealed glass, tempered safety glass is recommended for use as safety glazing
for potentially hazardous locations including entrance doors, patio doors,side
lites, and shower doors. if damaged, tempered glass will shatter into small
blunt glass fragments rather than sharper, more dangerous pieces. tempered
glass is the most economical means of meeting safety glazing requirements.
The tempered glass performs well in resisting bending and hitting owing to its
high strength which is 3-5times that of normal annealed glass. It is able to
withstand a surface pressure of 95Mpa.
When the tempered glass is broken, it turns into alveolate granules with obtuse
angles, which guarantee safety to make sure human harmless, and the toughening
process greatly reduces the risk of thermal breakage to ensure less loss.
The tempered glass is capable of withstanding a temperature change of 250 to
320℃ while normal annealed glass can only bear 20 to 100℃.
Normal annealed glass
Inte , nsity
, Surface Stress
Size: Maximum 3000*8000mm, Minimum 150*300mm
Thickness: 3mm 4mm 5mm 6mm 8mm 10mm 12mm 15mm 19mm
Color: clear, ultra clear, green, blue, grey, bronze, etc.
Type: Clear, Tinted, Reflective, Low Iron, Etched, Textured, color painted,
pattern screen printing, Colorsmart, Thermocolour and Low E glass, etc.
Processing: All the processing like beveling, cutting, drilling, etc. must be
done before tempering.
Any edges could be done perfectly, like flat polished edge (T edge), pencil
edge (C edge), beveled edge, ogee edge, matt edge, corner round edge.
Holes and notches
Tempered glass can be supplied with drilled holes (no matter straight or
conical) and cut notches. We will consider hole and notch locations and size
according to your drawings. Please kindly check below details:
Glass edge to nearest point of hole
Glass less than 1/2" thick should not have holes located any closer than 1.5
times the thickness of the glass. Glass thicker than 1/2" should not have
holes located any closer than 2 times the thickness of the glass.
Glass corner to nearest point of hole
Holes should not be located any closer than 6.5 times the thickness of the
Dimension of holes
The minimum dimension of a hole should not be less than the thickness of the
glass. The maximum dimension of the hole should not be more than 1/3 the
narrowest dimension of the piece.
Notches and cutouts
All must have a fillet with radius equal to, or greater than the thickness of
Except rectangle, HEXIN Glass also could do shape tempered glass, like round,
Trapezoid, parallel, etc.
• Glass Balustrades
• Glass skylight
• Glass canopy
• Shower Screens
• Glass shelves
• Glass Doors And Windows
• Frameless Entry And Balustrading
• Public Venues
• Office Buildings
• Residential, Factories
• Hospitals And Schools
• Restaurants, Sporting Facilities
• Furniture like table top, cabinet doors
• Many Others.
Minimum Order: 100 square metres
Click to Enlarge
SOURCE: Import-Export Bulletin Board (http://www.imexbb.com/)
Involved in International Trade? Become an Advertiser!
Post an Offer to Sell
© 1996-2010 IMEXBB.com. All rights reserved.