Import-Export Bulletin Board Hynall Intelligent Control Co. Ltd Logo

Home > Offers to Sell > Electronics & Electrical > Motors & Parts > AC Motors

Contact: eric
Company: Hynall Intelligent Control Co. Ltd
Floor 14th, Hui-Jing-Yuan Science & Technology Innovation Park, #531 Nan'pu Road, Shajing, Bao'an Di
Guangdong 518104
China
Phone: 86-0755-27206061
Fax: 86-0755-27202372
E-Mail: Send Inquiry
Date/Time:  4/13/18 6:56 GMT
 

AC Input Microwave Motion Sensor - Highbay Version

AC Input Microwave Motion Sensor - Highbay Version
AC Input Microwave Motion Sensors
Microwave Motion Sensors AC Input
HNS203HB
5.8GHz C-band microwave motion sensor, tri-level dimming control.
Operating voltage: 120~277V AC, 50/60Hz.
Rated load: 400W @ 120VAC, (capacitive)
Features
5.8GHz C-band microwave motion sensor, tri-level dimming control.
Operating voltage: 120~277V AC, 50/60Hz.
Rated load: 400W @ 120VAC, (capacitive)
800W @ 200~277VAC, (capacitive)
Stand-by power: <1w.
Dual-PD technology, real Daylight monitoring function for built-in application.
Zero-cross point operation, protect the sensor relay against the in-rush current,
secure the max. load and life time of the relay .
Detection range up to 18m in diameter.
Mounting height: 10~12m.
Operation temperature:-20℃+70℃
RoHS compliant.
IP rating: IP20.
Setting
Detection range
Detection range can be reduced by selecting the combination on the DIP switches to
fit precisely each application.
Hold-time
Hold-time means the time period to keep the lamp on 100% after motion detected.
*when hold-time set as 3s, sensor enters into test mode, this test mode is mainly
for users to choose the desired detection range.
In this mode, the daylight sensor is disabled, when there is no motion, fixture
keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s
off.
Daylight sensor
Daylight sensor means the daylight threshold to enable or disable the sensor
function.
"Disable": The sensor works always, even during daylight.
"50lux": The sensor works only in twilight.
"10lux, 2lux": The sensor works only in the dark.
Stand-by period
This is the time period that the lamp remains at a low light level before it is
completely switched off in the long absence of people.
"+∝" : means bi-level dimming control, the fixture never switch off.
Stand-by dimming level
This is the dimmed low light level you would like to have after the hold-time in
the absence of people.
*0% means on/off control.
10%--Vdim=1.5Vdc   30%--Vdim=3.0Vdc50%--Vdim=5.0Vdc

AC Input Microwave Motion Sensor - Highbay Version
Enlarge Click to Enlarge
SOURCE: Import-Export Bulletin Board (http://www.imexbb.com/)
Report Abuse

Involved in International Trade? Become an Advertiser!

Post an Offer to Sell

© 1996-2010 IMEXBB.com. All rights reserved.

IMEXBB.com