Home > Offers to Sell > Industrial Machinery & Equipment > Other Industrial Equipment > Other Industrial Equipment
||Bluefish Technology Co.,Limited
|| Huafeng Time Square Room 322,No 25 Area,Bao'an District
||6/9/18 1:40 GMT
DC 12V Fountain Water Supplying Increasing Oxygen Centrifugal Pumps
DC 12V Flow 600L/H Fountain Water Supplying Increasing Oxygen Centrifugal Aquarium
Pumps for Fish Tank
Max Flow Rate(L/H):600
Diameter of Outlet(MM):16
Dimen , sions 71.5mm*70mm*50mm
Outlet Diameter 16mm
Driving Model Brushless,Magnetic Containment
Pump Body Material ABS,PES/SPS/PPS/PA66+30%GF (Optional)
Working Way Submersible Used
Working Medium Water, Oil, other acid-base solutions
Max Working Temperature 60ºC
Power Consumption 4.8W
Rated Voltage 12vdc
Max Load Current 0.42A
Max Flow 10L/MIN
Max Static Lift 1M ,
Noise Level <35dB
Waterproof Class IP68(Submersible Installation)
Lifespan More than 30,000 Hours
Power Supply Way Solar panels, batteries, adapters, power modules
Protection Function Water shortage protection, idling protection, blocking
protection and stuck protection(Optional)
Note:(Get more Material,Technical data, Please Send Message)
1.DC12V , ,low-voltage,safe,NO.1 aquarium submersible pump in China.
2.100 percent copper motor,brushless,non-pollution,small size with high
efficient,long life span.
3.Super energy saving 50 percent.
4.Small size,high efficiency,maintenance-free,low consumption,strong anti-
5.Adopt silicone foot to absorb vibration and reduce noise,easy for installation.
6.Stator and control circuits are completely sealed by epoxy resin completely
separated with rotor,waterproof,avoided water-leakage problem which long exists in
normal DC motor pump products.
7.Protection functions can be customized such as lock protection,dry-run
protection and so on.
8.Reduced the mortality to 0.05 percent after long-time study by R and D dep.
9.Suitable for submersible installation.
10.Offer ODM serve for pump and other controller system.
11.The three in one pump increases the flow and oxygenation of the fish tank,
which is also a good choice for the dilute oxygen tank. It saves the cost of the
air pump. The pump is strong enough to pump, and it is not easy to cause blockage
and stop the pump. After the transformation of the connecting pipe of the lower
end of the pump, the oil film can be filtered easily.
Customers how to choose the pump:
1. First determine the voltage, current, water head and flow, diameter size.Water
pump head is generally the subject of the water which does not flow when pumped
up to the static head, if a customer requires pumping the water to a certain
height and then to maintain a certain water flow, The water head must be higher
than the specified pumping height. You can refer to lift- flow graph.
2. To determine the dimension and form (threaded interface, inlet and outlet
orientation, aperture size, etc. )
3. To determine the job requirements (temperature, work time and frequency)
4. To determine the functional requirements (time control, pressure control, flow
control, speed, etc. )
Why choose us?
To ensure the quality of our pumps and other products,Our QC staffs do strict
supplier evaluations,in-coming inspections,in-process inspections,final
inspections and pre-delivery inspections.The most important is that we listen to
what our customers say and are always looking for ways to improve the quality of
our products through continuous improvement.
We have built stable and long-term cooperate relationship with supermarkets,we can
also provide ODM,OEM and Agent services to our customers over the world.
We have spare parts for immediate delivery to anywhere in the world.While our
pumps become standard with more features than anyone else, we also offer more
optional parts for our pumps than anyone else.
We take customer satisfaction and product quality as the first priority for us. We
supply reliable warranties and good after-sales services.
1.*Q:Can I get samples from you?
A:We are honored to offer you samples for quality check.
2.*Q:What parts are manufactured by you?
A:80% of frame parts are manufactured by us.Spare parts are from China top 10
3.*Q:What's the leading time?(How long do you need to prepare my goods?)
A:10 days for sample orders.30 days for mass production orders(based on different
4.*Q:How long do I need to wait before my goods arrive?
A:3-5 days for international express.5-7 days for air transportation, 35-40 days
for sea transportation.
5.*Can you put my brand name(logo) on these products?
A:Yes,or container order.Sticker order qty over 100pcs.
6.*Q:What payment methods do you accept?
A:T/T,L/C,Western Union,Money Gram,etc.
7.*Q:What certificates do you have?
A:Since Europe and America are our main markets,all of our products are with
CE/ISO certificate.For some models,the certificates are already available.For
other models,we will need your assistance to apply the certificates.
8.*Q:What is your product quality?
A:Our raw materials are purchased from qualified suppliers.And we have a strong
quality control team to guarantee our quality.We always care what you care!!
9.*Q:What is your warranty?
A:Our warranty is 24 months after delivery.We always pay high attention to after
10.*Q:How are parts availability?
A:We keep stock of spare parts and make sure all parts available whenever you
Minimum Order: 10 pieces
Click to Enlarge
SOURCE: Import-Export Bulletin Board (http://www.imexbb.com/)
Involved in International Trade? Become an Advertiser!
Post an Offer to Sell
© 1996-2010 IMEXBB.com. All rights reserved.