Import-Export Bulletin Board  

Home > Offers to Sell > Industrial Machinery & Equipment > Other Industrial Equipment > Other Industrial Equipment

Contact: Amy Sun
Company: Bluefish Technology Co.,Limited
Huafeng Time Square Room 322,No 25 Area,Bao'an District
Shenzhen 518100
Phone: 8615820499521
E-Mail: Send Inquiry
Date/Time:  6/9/18 1:24 GMT

DC 12V Submersible Brushless Long Life WaterAquarium Pumps for Fish Pond

DC 12V.0.6A max loading current . 420L/H max flow rate.1.5M max lift.5.3W power
Pump Body Material:PA66+30%GF
Outlet Diameter:13mm
Types of Fluids:Suitable for water,oil and acid-base solutions
Noise Level :<40dB
Waterproof Class:IP68
Lifespan:More than 30,000 Hours
Cable Length:About 1 Meters
Power Supply:DC 12V

1.DC 12V.0.6A max loading current. 420L/H max flow rate.1.5M max lift.5.3W power
2.Small size,high efficiency,long life expectancy,low noise level.
3.Ceramic shaft,Carbon graphite seal low coefficient of friction.
4.Non-comformity rate < 0.5%.
5.Brushless, no mechanical wear,electronic commutator.
6.The electricity and fluid are insulated from each other,sealed with epoxy,100%
water proof,leakage proof.

1, Fish pond pump. It's suitable for pond landscapes, fountains,rockery waterfall
and so on.
2, The Use of fish tank aquarium filter.
3, For garden watering, garden pumping, equipment and other cleaning.
4, For the supply and discharge of seawater or acid and alkaline liquids.

Brushess Mini DC water pumps work Note: 

1. The performance of brushless DC pumps is excellent. The premise is that they
are used correctly. Changes of using environment will affect the actual effect of
the pump.
2. The wire of the water pump can be available  to a variety of different
requirements according to different customers. Please pay attention to the
description of the product page and consult the customer service when purchasing
3. The brushless DC water pump can not be used for overpressure, please use the
corresponding rated voltage DC power to supply for the pump;
4. The brushless DC water pump is a centrifugal pump.  It must be installed below
the liquid level to use it.
5. When mpurities and particles enter the pump body,it will damage the pump.
Please ensure that the water source is clean. Special attention is required when
using the pump. It is recommended to install a filter device;
6. The water pump must not run withourt water.Long-term waterless idling will burn
the water pump;
7. When the pump is used in the pipeline, first open the valve and then turn on
the power. When shutting it off, turn off the power and then close the valve.
8. The battery can not be directly connected to the pump.The actual voltage will
far exceed its rated voltage after the battery is full .The pump must be connected
to the pressure limiting measures.
9. The head of the pump is the vertical height of the water after it is connected
to the pipe.
10. The flow of the pump at the maximum head is 0. Please refer to the flow-head
diagram to select the pump.
11. The life of the pump is the result of the life test conducted in a stable
working environment in the laboratory. The use of different environments may
shorten the service life of the pump.
12. Ensure that the water source is clean, regular inspection can increase the
service life of the pump;
13. Ask us if necessary.

Customers how to choose the pump:
1. First determine the voltage, current, water head and flow, diameter size.Water
pump head is generally the subject of the water which does not flow  when pumped
up to the static head, if a customer requires pumping the water to a certain
height and then to maintain a certain water flow, The water head must be higher
than the specified pumping height.  You can refer to lift- flow graph. 
2. To determine the dimension and form (threaded interface, inlet and outlet
orientation, aperture size, etc. )
3. To determine the job requirements (temperature,  work time and frequency)
4. To determine the functional requirements (time control, pressure control, flow
control, speed, etc. )

Why choose us?

1.Quality Control
To ensure the quality of our pumps and other products,Our QC staffs do strict
supplier evaluations,in-coming inspections,in-process inspections,final
inspections and pre-delivery inspections.The most important is that we listen to
what our customers say and are always looking for ways to improve the quality of
our products through continuous improvement.

2.OEM Ability  
We have built stable and long-term cooperate relationship with supermarkets,we can
also provide ODM,OEM and Agent services to our customers over the world.

3.Parts Available
We have spare parts for immediate delivery to anywhere in the world.While our
pumps become standard with more features than anyone else, we also offer more
optional parts for our pumps than anyone else.

4.Good Warranty
We take customer satisfaction and product quality as the first priority for us. We
supply reliable warranties and good after-sales services.


1.*Q:Can I get samples from you?
 A:We are honored to offer you samples for quality check.

2.*Q:What parts are manufactured by you?
A:80% of frame parts are manufactured by us.Spare parts are from China top 10
famous suppliers.

3.*Q:What's the leading time?(How long do you need to prepare my goods?)
A:10 days for sample orders.30 days for mass production orders(based on different

4.*Q:How long do I need to wait before my goods arrive?
A:3-5 days for international express.5-7 days for air transportation, 35-40 days
for sea transportation.

5.*Can you put my brand name(logo) on these products?  
A:Yes,or container order.Sticker order qty over 100pcs.

6.*Q:What payment methods do you accept?  
A:T/T,L/C,Western Union,Money Gram,etc.

7.*Q:What certificates do you have?
A:Since Europe and America are our main markets,all of our products are with
CE/ISO certificate.For some models,the certificates are already available.For
other models,we will need your assistance to apply the certificates.

8.*Q:What is your product quality?
A:Our raw materials are purchased from qualified suppliers.And we have a strong
quality control team to guarantee our quality.We always care what you care!!

9.*Q:What is your warranty?
 A:Our warranty is 24 months after delivery.We always pay high attention to after
sale service!!

10.*Q:How are parts availability?  
A:We keep stock of spare parts and make sure all parts available whenever you

Minimum Order: 10 pieces

SOURCE: Import-Export Bulletin Board (
Report Abuse

Involved in International Trade? Become an Advertiser!

Post an Offer to Sell

© 1996-2010 All rights reserved.