Import-Export Bulletin Board Hynall Intelligent Control Co. Ltd Logo

Home > Offers to Sell > Electronics & Electrical > Motors & Parts > DC Motors

Contact: eric
Company: Hynall Intelligent Control Co. Ltd
Floor 14th, Hui-Jing-Yuan Science & Technology Innovation Park, #531 Nan'pu Road, Shajing, Bao'an Di
Guangdong 518104
China
Phone: 86-0755-27206061
Fax: 86-0755-27202372
E-Mail: Send Inquiry
Date/Time:  8/4/18 8:02 GMT
 

DC Input Motion Sensor Module

DC Input Motion Sensor Module
Standard Motion Sensor Module
5V/12V DC Input Microwave Motion Sensor - Standard Version
HNS101D
5.8GHz C-band microwave, tri-level dimming function.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:≥25mA.
Features
5.8GHz C-band microwave, tri-level dimming function.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:≥25mA.
5V DC PWM output or 0~10V DC signal.
Super compact, flexible to be integrated into any suitable fixtures.
Dual-PD technology, real Daylight monitoring function for built-in application.
8 pin DIP switch setting, multiple options to meet different customer demands.
Detection range up to 12m in diameter.
Mounting height: 3~6m.
Operation temperature; -20℃ ~ + 70℃.
RoHS compliant.
Settings
Detection range
Detection range can be reduced by selecting the combination on the DIP switches to
fit precisely each application.
Hold-time
Hold-time means the time period to keep the lamp on 100% after motion detected.
*when hold-time set as 3s, sensor enters into test mode, this test mode is mainly
for users to choose the desired detection range. In this mode, the daylight sensor
is disabled, when there is no motion, fixture keeps off, when there is motion
detected, fixture keeps a cycle of 3s on and 2s off.
Daylight sensor
Daylight sensor means the daylight threshold to enable or disable the sensor
function.
"Disable": The sensor works always, even during daylight.
w50lux": The sensor works only in twilight.
w10lux, 2luxw: The sensor works only in the dark.
Stand-by period
This is the time period that the lamp remains at a low light level before it is
completely switched off in the long absence of people.
“+∞”: means bi-level dimming control, the fixture never switch off.
Stand-by dimming level
This is the dimmed low light level you would like to have after the hold-time in
the absence of people.
Daylight monitoring function
Utilizing the Dual-PD technology, this sensor can tell the difference of natural
light and artificial light(lamp) from behind the diffuser, switch on
automatically(even without movements) when the ambient light is below target
value, and then switch off automatically whenever the artificial light is not
required(ambient light is bright enough).
This is the REAL & INTELLIGENT daylight monitoring sensor for built-in
installation.
Note: Lux-Off sampling time—30s; Lux-On sampling time—10s.
Lux-On function takes effect only when standby dimming period set at+∞
DC Input Motion Sensor Module
Enlarge Click to Enlarge
SOURCE: Import-Export Bulletin Board (http://www.imexbb.com/)
Report Abuse

Involved in International Trade? Become an Advertiser!

Post an Offer to Sell

© 1996-2010 IMEXBB.com. All rights reserved.

IMEXBB.com