Import-Export Bulletin Board  

Home > Offers to Sell > Chemicals & Plastics > Rubber Raw Materials

Contact: Amanda Yao
Company: Hong ye technologe limited
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Town, Long Gang district,
guangdong 518117
China
Phone: +8618938867547
Fax: 086-755-89948030
E-Mail: Send Inquiry
Date/Time:  3/23/19 1:56 GMT
 

Electronic Potting Silicone Rubber

Product Feature of Electronic Potting Silicone Rubber
Electronic Potting Silicone Rubber is a kind of low viscosity, Inherent flame
resistance, two components addition cured potting silicone with heat-
conducting. It cures with both on room temperature and heated temperature. It
has the feature of the higher temperature the faster of the curing time. It can
be applied to electronic components for insulation, waterproofing, fixed and
flame retardant. It mainly applied in electronic components surface with
materials of PC(Poly-carbonate)、PP、ABS、PVC, etc. and metal materials.
Technical Guidelines of of Electronic Potting Silicone Rubber
a, Pls put part A and part B in separate container and stir evenly before
mixing the two part together.
b, Mixing Ratio: part A: part B = 1:1
c, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then
the mixture could be used for pouring.

Note: The thickness of the silicone affects the curing time. If the silicone
used is a little thick,then the curing time will be a little longer.The
temperature also affects the curing time.When in lower temperature, we suggest
customers appropriately heat the mixture to accelerate vulcanization. With
temperature of 80~100℃, the silicone will cure in 15 minutes; while in 25℃
room temperature, the silicone will cure around 8 hours.

Minimum Order: 200 kilograms

Electronic Potting Silicone Rubber
Enlarge Click to Enlarge
SOURCE: Import-Export Bulletin Board (http://www.imexbb.com/)
Report Abuse

Involved in International Trade? Become an Advertiser!

Post an Offer to Sell

© 1996-2010 IMEXBB.com. All rights reserved.

IMEXBB.com