Home > Offers to Sell > Tools & Hardware > General Hardware > Anchors
||Hebei Qianmu Fastener Manufacturing Co.,Ltd.
||Beidong Street Industrial Park,Linmingguan Town,Yongnian District
||3/25/20 7:46 GMT
Factory direct sale Chemical Anchor
Factory direct sale Chemical Anchor High strength Chemical Anchor
Click to Enlarge
Strong anchoring force, similar to embedded
No expansion stress, small margin spacingQuick installation,
quick solidification, save construction time
Glass tube packaging is convenient for visual inspection of the quality
of tube agent
Glass tube after crushing as fine aggregate, bonding fully
Chemical anchor bolt Details
It is suitable for fixing heavy loads on near - edge and narrow
components (columns, balconies, etc.)Can be used in concrete (=>C25
concrete)Anchorage in natural pressure resistant stone (not tested)Apply
to the following anchorage: reinforced solid, metal components, towing
bracket, the machine of base plate, a guardrail, template fixed, fixed,
the fixed signs of sound barriers foundation, sleepers, fixed, slab edge
protector, heavy support beam, roof decoration component, Windows,
retainer, heavy lifts, floor support, fixed and wear of the transmission
system, the sleeper is fixed, the fixed bracket and shelf system, anti-
collision facilities, car towing bracket, pillar, chimney, heavy
billboard, heavy sound barriers, the heavy door fixed, fixed, the fixed
tower crane of complete sets of equipment, pipe fixed installation, heavy
towing bracket, guide rail fixed connection, nail plate, heavy
spacePartition device, shelf, awning fixed.
Adhesive bolt Method of use
1. According to the requirements of engineering design, the hole
diameter, hole depth and bolt diameter should be determined by
professional technical personnel or field test in the corresponding
position of drilling in the base material (such as concrete).
2. Drill with a percussion or hydraulic drill.
3. Use a special air cylinder, brush or compressed air machine to clean
the dust in the drilling hole. It is recommended to repeat at least 3
4. Ensure the bolt surface is clean, dry and oil-free.
5. Confirm that the glass pipe anchoring package has no appearance
damage, chemical solidification and other abnormal phenomena, and put the
round head inward into the anchoring hole and push it to the bottom of
6. Use the electric drill and special installation fixture to insert the
screw rod to the bottom of the hole with strong rotation. The impact mode
should not be adopted.
7. When rotating to the bottom of the hole or the marked position on the
bolt, stop rotating immediately, remove the installation fixture, and
avoid disturbance after gelation until complete curing.Time - out
rotation leads to loss of glue and affects anchoring force.(rotation time
should not exceed 30 seconds, rotation speed should not be less than 300
RPM, no more than 750 RPM, bolt propulsion speed is about 2cm/ SEC,
impact mode is not allowed.)
We are a Wood Screw wholesaler.Since the beginning of this century, the
company has been engaged in wedge anchor,white zinc plated drop in
anchor,Expansion Bolt and custom chemical anchor manufacturing industry,
and has won widespread favor and approval.
If you are interested in our products, click here to find out more.
SOURCE: Import-Export Bulletin Board (http://www.imexbb.com/)
Involved in International Trade? Become an Advertiser!
Post an Offer to Sell
© 1996-2010 IMEXBB.com. All rights reserved.