Import-Export Bulletin Board Guangzhou Zhenroumei Chemical Coatings Limited Logo

Home > Offers to Sell > Chemicals & Plastics > Paint, Pigments & Dyestuff > Paint

Contact: Qiqin Huang
Company: Guangzhou Zhenroumei Chemical Coatings Limited
No. 16, industrial Avenue Shihai
Conghua 266600
China
Phone: 86-020-87833698
Fax: 86-020-87833698
E-Mail: Send Inquiry
Date/Time:  12/7/18 7:47 GMT
 

MF1K Silver Colors

MF1K Silver Colors

Automotive Paint company
Product Name/Model:MF1K Silver Colors

Characteristic:MF1K Silver Color with excellent leveling property,easy
construction,excellent adhesion power and coveraging power,can match all kinds of
solid colors, metallic and pearl effect. Mainly applies to intermediate cars, MPV
and bus.
Substrates Well-Sanded, Completely dried and good existing finishes as
bellow:
A original paint B. Old paint firm C. 1K or2k primer
Surface Cleaning Wash by warm soap, remove wax, silicon and other
contaminations with
degreaser, sanding with P800-P1000, wash with clean water then keep dry;
again with degreaser.
Mixing Ratio MF1K Silver Color  Thinner
1 1
<15℃ MF1K Silver Color  60 Fast Thinner
15-30℃ MF1K Silver Color  61 Standard Thinner
>30℃ MF1K Silver Color  62 Slow Thinner
Spray Viscosity 14-16s to drop off, in 4# viscosity cup at 25°C,
Re-Treatment After spray, allow 10-20 minutes air-drying time,then spray clear
coat at once.
Spray Gun Set Up Gravity Feed: 1.2-1.5mm 3-5kg/cm ²
Suction Feed: 1.4-1.6mm 3-5kg/cm ²
Spray Technology Coats&Thickness: 2-3 coats, total 15-20um.
Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on
temperature and paint film.
Shelf Life   2 years in original sealed can, cool and dry place at 25℃.
Package 1L×12 or 3.75L×4
Note:
1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000
and then dry.
2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into
thinner to
avoid blushing. For more details, please refer to technical data sheet of Retarder
Solvent.
3. To avolid problems of mottling or poor adhesion, the metallic paint film
should be 15-25um.

Minimum Order: 100 pieces

MF1K Silver Colors
Enlarge Click to Enlarge
SOURCE: Import-Export Bulletin Board (http://www.imexbb.com/)
Report Abuse

Involved in International Trade? Become an Advertiser!

Post an Offer to Sell

© 1996-2010 IMEXBB.com. All rights reserved.

IMEXBB.com