Import-Export Bulletin Board Guangzhou Zhenroumei Chemical Coatings Limited Logo

Home > Offers to Sell > Chemicals & Plastics > Paint, Pigments & Dyestuff > Paint

Contact: Qiqin Huang
Company: Guangzhou Zhenroumei Chemical Coatings Limited
No. 16, industrial Avenue Shihai
Conghua 266600
Phone: 86-020-87833698
Fax: 86-020-87833698
E-Mail: Send Inquiry
Date/Time:  3/7/19 7:04 GMT

MF2K Solid Colors

MF2K Solid Colors
Refinish Automotive Paint
Product Name/Model:MF2K Solid Colors

Characteristic:MF2K Solid Colors, high gloss and build, good performance of
leveling property,easy construction, excellent pretective and coveraging power,
long lasting bright color. Mainly applies to intermediate cars, MPV and bus.
Substrates Well-Sanded, Completely dried and good existing finishes as
A original paint     B. Old paint firm     C. 1K or 2k primer
Cleaning Wash by warm soap, remove wax, silicon and other contaminations
with degreaser, sanding
with P800-P1000, wash with clean water then keep dry; again with degreaser.
Ratio MF2K Solid Colors Hardener Thinner
2 1 0.2-0.4
<15℃ MF2K Solid Colors MF281 Fast Hardener  60 Fast Thinner
15-30℃ MF2K Solid Colors MF282 Standard Hardener 61 Standard Thinner
>30℃ MF2K Solid Colors MF283 Slow Hardener 62 Slow Thinner
Viscosity 16-19s to drop off, in 4# viscosity cup, at 25°C,
Pot-life At 25°C
2 hours with fast hardener.
4 hours with standard or slow hardener.
Re-Treatment There are particles or runs after spray, sand affected area with
P2000 sand paper after
thorough drying, then polish to solve the problem.
Spray Gun Set Up Gravity Feed: 1.2-1.5mm 3-5kg/cm ²
Suction Feed: 1.4-1.6mm 3-5kg/cm²
Spray Technology Coats&Thickness: 2-3 coats, total 35-50um
Flash-Off Time: At 25°C, 5-10 minutes between two coats,
Air-Drying Time: Allow 10-15 minutes air drying time before force drying
Temperature Dust Free  Tack Free Dry To Handle Dry To
+25°C  40 minutes   2 hours  9 hours  6 Days
+70°C 5 minutes 10 minutes  25 minutes  50 Minutes
Shelf Life 2 years in original sealed can, cool and dry place at 25℃.
Package 1L×12 or 3.75L×4
1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000
and then dry.
2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into
thinner to avoid blushing. For more details, please refer to technical data sheet
of Retarder Solvent.
3. The products mixed with hardener should be used up soon and can not be restore
for future use;clean equipments immediately with thinner after application,
otherwise it is very difficult to be cleaned after dry.

Minimum Order: 100 pieces

MF2K Solid Colors
Enlarge Click to Enlarge
SOURCE: Import-Export Bulletin Board (
Report Abuse

Involved in International Trade? Become an Advertiser!

Post an Offer to Sell

© 1996-2010 All rights reserved.