Import-Export Bulletin Board Shijiazhuang Mining Area Fengwang Machinery Co., L Logo

Home > Offers to Sell > Chemicals & Plastics > Plastic Machinery & Parts > Rubber Machinery

Contact: Li Jianqiang
Company: Shijiazhuang Mining Area Fengwang Machinery Co., L
West Hengxi village,Mining area,Shijiazhuang City,
Hebei Province 050100
China
Phone: 86-311-85417306
Fax: 86-311-85417306
E-Mail: Send Inquiry
Date/Time:  3/21/17 3:44 GMT
 

PVC Golves Production Line

PVC Golves Production Line
Product Description
Introduction of Fengwang PVC glove production line's processes

Fengwang PVC glove production line is mainly consist of 4 parts:
1.Compounding equipments: including mixing machine, filter, vacuum di-bubble
machine, latex conveying pump;
2.Dipping equipments: frame, chain, dipping tank, recycling device, dripping
tank;
3.Plasticizing oven: Cooling, beading, Powder spreading, stripping;
4.Powder removing: Cooling sets, beading sets, powdering sets, stripping sets,
powder removing.

First of all, for making PVC glove, Putting the main material and agents into
the specific container and mixing them by certain ratio. The mixture will be
sent to the dipping tank by the feeding pump after filter, vacuum machine,
storage. Normally, hand mould will enter the dipping tank automatically. PVC
Gloves making machine will rotating after dipping to even the latex sticking on
the hand mould and let the extra latex dripping from the hand mould.
Extra latex will return to the dipping tank by passing the collecting tank. The
temperature of oven will be at 230~250 degree. Under this condition, the latex
will start shaping. The self-cooling, beading, powdering stages is coming after
oven. The manual stripping stage will take the glove out from the hand mould.
The product will be stored after powdering.
Dipping: Hand mould is dipping in the latex.
Beading;Applying adequate angle, the bead will appears at end of the glove. 
Stripping: Manually take the glove from the hand mould.
Packing: packing after physical and appearance check.

Household/Medical glove(full dipping) production line 
This PVC Gloves making machine production line is applying the method of
continuous production and direct-dipping method. The quality of the product is
evenly and colour of it is splendid. Different sorts of products can be make at
the same line simultaneously. Length of the line can be 60, 80, 100 meter. The
PVC Gloves machine Production Line is highly automatic and the capacity is also
high. There is an option for customer for automatic stripping. The length of
the line is also adjustable according to the customer conditions. 

Characteristics:
1.PVC Gloves machine is well designed. It can be modified reasonable according
to the shaping processes of different material( latex, nitrile, PVC,PC).
 Automatic refill system makes the quality stable and even-distribution. Also
the advantages including: heat receiving is even, production rate is high,
easy-stripping.
2.Heat recycling is the principle of the oven let the temperature inside the
oven even. The insulation is well by good heat insulation material. In order to
raise the heat efficiency, the auto-temperature control system alone with the
control switch can guarantee the good product rate.
3.Special flexible piston-style connect device makes the soild connection and
easy-changing of the hand mould.

PVC glove production line Advantages: 
1, Safety, to avoid the gear and chain exposed in outside 
2, To reduce the oil leaking
3, More convenient to adjust the rubber roller 
4, Low energy consumption after put into use; the box type design greatly
reduces the maintenance rate

Minimum Order: 1 sets

PVC Golves Production Line
Enlarge Click to Enlarge
SOURCE: Import-Export Bulletin Board (http://www.imexbb.com/)
Report Abuse

Involved in International Trade? Become an Advertiser!

Post an Offer to Sell

© 1996-2010 IMEXBB.com. All rights reserved.

IMEXBB.com