Import-Export Bulletin Board Hynall Intelligent Control Co. Ltd Logo

Home > Offers to Sell > Electronics & Electrical > Motors & Parts > DC Motors

Contact: eric
Company: Hynall Intelligent Control Co. Ltd
Floor 14th, Hui-Jing-Yuan Science & Technology Innovation Park, #531 Nan'pu Road, Shajing, Bao'an Di
Guangdong 518104
China
Phone: 86-0755-27206061
Fax: 86-0755-27202372
E-Mail: Send Inquiry
Date/Time:  4/13/18 6:45 GMT
 

Remote Control DC Input Motion Sensor

Remote Control DC Input Motion Sensor
Motion Sensor Module DC Input
5V/12V DC Input Microwave Motion Sensor – Remote Controllable Version
HNS112
5.8GHz C-band microwave, tri-level dimming control.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:≥25mA.
Features
5.8GHz C-band microwave, tri-level dimming control.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:≥25mA.
0~10V DC output signal.
Super compact, flexible to be integrated into any suitable fixtures.
Dual-PD technology, real Daylight monitoring function for built-in application.
IR remote commissioning, easy setting and user friendly.
Detection range up to 12m in diameter.
Mounting height: 3~6m.
Operation temperature: -20°C~ +70°C.
RoHS compliant.
Settings(Remote control IR12)
Permanent ON/OFF function
Press “ON/OFF” button, fixture goes to permanent on or permanent off mode,
sensor is disabled.
*press "Auto" ,"Reset" or "Ambient learn" to quit this mode.
Dim +/-
Press "Dim" button to automatically dim up or down the light brightness during
hold-time from 10% to 100%. Another press to lock it down when desired brightness
is achieved.
*after desired brightness is locked down, if user wants to dim again reversely,
just press the “Dim” button again and then lock down the new brightness again.
Sensor mode
Press "Auto" button, the  sensor starts to work and all settings remain the same
as the latest status before the light was switched on/off.
Reset function
Press "Reset" button, all settings go back to factory default settings.
Factory default settings--
        Sensitivity=100%
        Daylight sensor=disable
        Hold time=90s
        Twilight time=5min
        Twilight level=10%
Ambient learn
Press "Ambient learn" button, the latest surrounding  lux   value overwrites
previous lux value learned, and set as the  daylight threshold. This feature
enables the fixture to function well in any real application circumstance.
Test mode
"Test mode" is for testing purpose only, for users to check the functionality and
choose the desired detection range. The sensor goes to test mode automatically
after pressing this button.
Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold
time". The sensor settings are changed accordingly.
*Test mode defaulted settings—
         Daylight sensor=disable
         Hold time=3s 
         Twilight time=N/A
         Twilight level=N/A
In this mode, when used for on/off control, after motion detected, sensor enters
into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming
control, after motion detected, sensor enters into a cycle of 3s on and 2s
off(0.5s soft off + 1.5s off).
Remote Control DC Input Motion Sensor
Enlarge Click to Enlarge
SOURCE: Import-Export Bulletin Board (http://www.imexbb.com/)
Report Abuse

Involved in International Trade? Become an Advertiser!

Post an Offer to Sell

© 1996-2010 IMEXBB.com. All rights reserved.

IMEXBB.com