Import-Export Bulletin Board Bazhou WanQi Power Tools Factory Logo

Home > Offers to Sell > Tools & Hardware > Electric & Gasoline Powered Tools > Other Electrical Powered Tools

Contact: yin chao
Company: Bazhou WanQi Power Tools Factory
No. 18, Economic and Technological Development Zon
Bazhou 065700
Phone: 86-316-7902101
Fax: 86-316-7869911
E-Mail: Send Inquiry
Date/Time:  10/9/16 2:41 GMT

Resin Cable Jointing Kits for Street Lighting Cables

Scotchcast Resin Cable Joint Kit
Product introduction:
Cable Joint as an important connection point of the whole power supply network,
its running stability will directly affect the quality of the power supply
system. Because the cable joint is made artificially in the on-site
installation is complete, the environment affected by the construction and
operation of the environment, will inevitably cause the error of installation,
external damage, cable breakdown caused by explosion and water etc.

And in the Cable Joint breakdown and explosion will release a lot of energy,
the surrounding power facilities or personnel to cause harm, or even cause the
occurrence of the two accident. To solve these problems, our company developed
with fire prevention, waterproof, explosion-proof function Scotchcast Resin
Cable Joints, all-round protection, once the explosion or breakdown of cable
joints, can effectively protect the surrounding power facilities and other
personnel, prevent the occurrence of two damage.

Technical characteristics:
1, the shell is made of Scotchcast Resin, Scotchcast Resin are anisotropic
materials, coupled with the formula and additives in a wide range of
selectivity, glass steel according to the work environment and the state,
adding special flame retardant additives, the glass steel material with good
flame retardancy, the main parameters of flame retardant oxygen index should
reach 62.5%. A high-quality composite glass steel, it has a special function to
prevent acid, alkali, salt, oil and other corrosive media, and will not rust.
The coastal areas and chemical sites and long buried underground requirements.
Product performance to ensure that accessories can be a long time stable
2, in the combination of Scotchcast Resin Cable Joints with silicone rubber
sealing ring to seal the shell, enhance the waterproof performance of the cable
intermediate joint.
3, with a strong pressure performance, Scotchcast Resin Cable Joints can
withstand the impact from the internal or external.
4, in the Scotchcast Resin Cable Joints side of a sealing plug sealed with
silicone rubber discharge hole, and discharge hole direction can be adjusted,
once the cable joint explosion, discharge hole on the sealing plug can be
quickly opened and can effectively prevent the other cables, or the surrounding
environment destruction, flame retardant properties of the shell is also can
guarantee the internal flame extinguished due to hypoxia.
5, convenient and quick installation, can meet the requirements of 10kV, 35kV
single core and three core cable laying.
6, safe and reliable, widely used in electric power, coal, chemical industry
and other high-risk industries and key projects of power supply network.

Scope of application:
Glass steel casing is divided into several categories, which can be suitable
for 10KV, 35KV, 110KV, 220KV, Cable Joint, 500KV. And can be applied to single
core or three core and multi-core cable.
Jointing Kit Contents
Scotchcast Mould body with closure cap
Scotchcast 470W resin bag
Scotch 23 Tape
Armour connection components
Disposable gloves (EN394)
Detailed installation instruction
The main function of Scotchcast Resin Cable Joint Kit is to withstand a certain
external force impact and damage in the middle of the joint.
Dead work
Check with Scotchcast Resin Cable Joint Kit diameter applicable specifications
and size with the cable and the middle of the head (the stress cone or shell)
is consistent with the size of the;
Check the sealing material Scotchcast Resin Cable Joint Kit (gasket, opening
Haff sealing material: glass steel shell and two port cable strip and heat
shrinkable tube) is complete;
Check the high voltage cable sealant two component cable plastic packing is
complete, the quantity of the component is sufficient;
Scotchcast Resin Cable Joint Kit assembly
The middle section cleaning about installing Scotchcast Resin Cable Joint Kit
joints, install the Scotchcast Resin Cable Joint Kit on the second half leads
to coaxial cable or grounding cables, a plurality of tightening bolts, two
Scotchcast Resin Cable Joint Kit ports and coaxial cable and grounding cable
sealing process (including sealing strip and shrink tube); the two components
of high voltage cable cable sealant glue mix well; glue, glue should pay
attention to its continuity, two groups of glue is filled into the interval of
time as short as possible; glue please glue leakage;
Note: a two-component adhesive sealant for high-voltage cable cable in the
process of curing some slight volume expansion, so can not be poured too full,
generally below the mouth filling glue along the height of 20 to 30mm;
Closed cover mouth, installation is completed.
Contact us
Person in charge:Caeser
Tel: +86-316-7869911
Fax: , +86-316-5661106
Phone:+86 13313261691

Minimum Order: 10 pieces

Resin Cable Jointing Kits for Street Lighting Cables
Enlarge Click to Enlarge
SOURCE: Import-Export Bulletin Board (
Report Abuse

Involved in International Trade? Become an Advertiser!

Post an Offer to Sell

© 1996-2010 All rights reserved.