Home > Offers to Sell > Chemicals & Plastics > Chemical Equipment & Lab Supplies > Chemical Machinery
rubber and plastic internal mixer,banbury mixer,intensive mixer
Item X(S)M-50×40 X(S)M-80×40 X(S)M-120×40 X(S)M-160×40
Total Volume of Mixing Chamber L 50 80 120 160
Working Volume of Mixng Chamber L 30 60 90 120
Rotational Speed of Main Rotor(rear) r/min 40 40 40 40
Friction ratio of (front/rear) rotors ------- 1:1.172 1: 1.43 1: 1.15 1: 1.16
Main Motor Power KW 95 210 280 450
Pressure of Ram MPa 0.2~0.45 0.28~0.37 0.35~0.45 0.36~0.49
Pressure of Cooling Water MPa 0.3~0.4 0.3~0.4 0.3~0.4 0.3~0.4
Overall Dimension mm 5600×2700×3300 5930×2620×3900
Weight kg 14000 22000 28000 32000
The rubber (plastic) internal mixer is mainly used for rubber or plastics mixing
and plasticizing, or rubber and plastic blending. It is a type of efficient
intensive mixing equipment that widely used in the field of rubber and plastic
Function Features of Aoqian General Internal Mixer (intensive mixer)
1. The machine conforms to the provisions of the national standard “GB/T9707-2000
Sealed refined rubber (plastic) machine”.
2. This machine adopts two rowed glass rotor，the screw arris is hollow and weld
on the forged axis, it adopts the forced cooling or circulatory heating, the heat
transfer is good.
3. The main motor is JRO type, with full sealing structure, it adopts to dust
environment. It has winding rotor motor, its starting torque is big and the
overload capacity is strong. Even if the power grid voltage is a bit low, the
machine can work smooth.
4. The power of main motor is high, the pressure of the pressure weight to
material is high, and it is much suitable for high temperature forging and can
shorten the period.
5. The machine can set several steps mixing, it can set time control, temperature
control, electric power control, and the temperature control is set
preferentially. The user can set an ultimate temperature, when the temperature
reach the ultimate temperature, the machine can unload compulsively even if it is
in time control or electric power control, it can insure the material quality.
6. The electric power control of the machine has touch screen, we can watch all
the mixing process, the mixing level, the condition from the screen clearly. The
screen can also show the stoppage of electric power control system, hydraulic
system, end face sealed lubricating device, dry oil lubricating device and air
control system. The user can watch the stoppage from the screen when the failure
warning, and to solve the specific problem in time.
7. The electric power control adopts the famous brand PLC as the master control
unit, and all kinds of protections, chain function is ready.
Payment Term: 30% TT deposit, 70% balance payment before shipment. (Negotiable)
Standard Packaging: Covered with moisture proof plastic film.
Customized Packaging: Pallet, wooden case, or other required package is available.
Shipment: container by sea.
Port of Loading: Dalian, China.
1. Before delivery, arrange test-run and adjust the equipment in our workshop,
till there is no problem. According to customers’ requirement, provide necessary
photos or videos of specific steps.
2. After delivery, if customers have problem on installation, adjustment, and
maintenance, we can provide technical support after analyzing photos or videos
sent by customers. If necessary, our engineers can provide overseas service.
Correlative charges need to be borne by customers.
Contact Us for Further Inquiry:
Dalian Aoqian General Rubber & Plastic Machinery Co., Ltd
Add: No.9, Qixin Road, Ganjingzi District, Dalian 116036 China.
Tel: +8641166007299 Fax: +8641166007361
Minimum Order: 1 sets
Click to Enlarge
SOURCE: Import-Export Bulletin Board (http://www.imexbb.com/)
Involved in International Trade? Become an Advertiser!
Post an Offer to Sell
© 1996-2010 IMEXBB.com. All rights reserved.