Electrical Plugs & SocketsHome > Offers to Sell > Electronics & Electrical > Electrical Plugs & Sockets
4/24/24 9:33 GMT
Peelable S/M 2Layers Lead Free HASL FR4
Peelable S/M 2Layers Lead Free HASL FR4 Product Description Damage from additional thermal deviation Coplanarity issues due to pad-to-pad coating thickness variations Potential coplanarity issues with HASL finishes Stencil spacer issues are related to differences in coating thickness and mushroom cap profile (coating) on small pads. The difference in solder coating thickness for lead-free HASL coatings is typically about half the thickness of tin-lead HASL coatings. In this finish, coplanarity is also good. Modern HASL lines are designed to provide operating conditions consistent with other equipment in modern cardboard workshops to avoid heat and smoke problems. Due to the higher surface tension of lead-free solder, the coating formed in the HASL process is thin and uniform compared to tin-lead solder formed under similar conditions. The coating thickness can be checked by XRF (X-ray Fluorescence Spectroscopy) technology. Compressive stress is the driving force for whiskers (filaments protruding from the surface of a board with tin as the final finish). Lead Free HASL offers a corrosion-resistant finish that ensures long-term solderability. Application area: Security Product feature: Peelable S/M Layer: 2 Surface treatment: Lead Free HASL Material: FR4 Line width/Line space: 0.325/0.305mm Thickness: 1.6mm Min hole φ: 0.75mm Contact:
Phone: Fax: Email: Chengyi Electronics (Jiaxing) Co., Ltd
No. 972 Gangshan Road, Xiuzhou District Jiaxing City 314003 China 4/24/24 9:33 GMT
Automotive dashboard PCB
Automotive dashboard PCB Product Description Application area: Automotive Product feature: Carbon ink board Layer: 4 Surface treatment: Lead Free HASL Material: FR4 Line width/Line space: 0.254/0.202mm Thickness: 1.6mm Min hole φ: 0.45mm Automotive PCB Design can minimize production time and cost. Electronic components in a car must be reliable and must be installed efficiently in place. Incorporating form factors into a vehicle's complex chassis arrangements can make or break success. Every additional step on the assembly line costs money for every second it takes to install, tighten, bolt, or tuck the board and its wiring harness connections. You need tools that can collaborate with your mechanical design counterparts to ensure assembly efficiency. You need tools that allow you to pre-determine how best to place components and adjust the board for installation. Contact:
Phone: Fax: Email: Chengyi Electronics (Jiaxing) Co., Ltd
No. 972 Gangshan Road, Xiuzhou District Jiaxing City 314003 China 4/24/24 9:32 GMT
ENIG BGA PCB
ENIG BGA PCB Product Description: BGA PCB Board is a surface mount package for integrated circuits. BGAs can provide more interconnect pins than dual in-line or flat packs, each with solder balls. All connections are distributed in a uniform surface grid or matrix on the component. BGA is a surface mount package for integrated circuits. BGA packages are used to permanently mount devices such as microprocessors. BGAs can provide more interconnect pins than dual in-line or flat packs, each with solder balls. All connections are distributed in a uniform surface grid or matrix on the component. The entire underside of the device can be used, not just the perimeter. On average, the leads are also shorter than peripheral-only types, resulting in better performance at high speeds. BGA PCB Board is not like ordinary PCB. They require the latest manufacturing, assembly and testing techniques. We have the perfect solution for all your BGA PCB needs. We are technically well equipped to supply any complex or simple BGA PCB or PCBA. Application area: Consumer electronics Product feature: BGA/Black ink Layer: 4 Surface treatment: ENIG Material: FR4 Line width/Line space: 0.99/0.14mm Thickness: 1.2mm Min hole φ: 0.20mm Contact:
Phone: Fax: Email: Chengyi Electronics (Jiaxing) Co., Ltd
No. 972 Gangshan Road, Xiuzhou District Jiaxing City 314003 China 4/24/24 9:32 GMT
Immersion Tin 4layer press fit hole board
Immersion Tin 4layer press fit hole board Product Description Application area: Automotive Product feature: Four-layer press fit hole board Layer: 4 Surface treatment: Immersion Tin Material: FR4 Line width/Line space: 0.229/0.253mm Thickness: 1.6mm Min hole φ: 0.35mm Contact:
Phone: Fax: Email: Chengyi Electronics (Jiaxing) Co., Ltd
No. 972 Gangshan Road, Xiuzhou District Jiaxing City 314003 China 4/24/24 9:31 GMT
ENIG Automotive ECU project PCB Board
ENIG Automotive ECU project PCB Board Application area: Industrial control PCB Product feature: 6L half hole board, ENIG, FR4 Product Description Application area: Industrial control Product feature: Half hole PCB board Layer: 6 Surface treatment: ENIG Material: FR4 Line width/Line space: 0.127/0.133mm Thickness: 1.6mm Min hole φ: 0.20mm Contact:
Phone: Fax: Email: Chengyi Electronics (Jiaxing) Co., Ltd
No. 972 Gangshan Road, Xiuzhou District Jiaxing City 314003 China 4/24/24 9:30 GMT
ENIG automobile reversing radar PCB
ENIG automobile reversing radar PCB Reliability is a key driver for Automotive PCB Design and transportation industries. CHANYEE has developed materials that engineers need to provide excellent heat resistance in terms of working temperature and thermal cycle performance, achieved through patented filler technology, and meet or exceed the most demanding customer requirements. Automobile red PCB Product Description Application area:Automotive Product feature: Red Ink Layer: 2 Surface treatment: ENIG Material: FR4 Line width/Line space: 0.254/0.346mm Thickness: 1.0mm Min hole φ: 0.45mm Contact:
Phone: Fax: Email: Chengyi Electronics (Jiaxing) Co., Ltd
No. 972 Gangshan Road, Xiuzhou District Jiaxing City 314003 China 4/15/24 6:43 GMT
71368-80-4 Name: Bromazolam
Threema:8FDX5N99 Signal/Telegram/whatsapp::+8 , 52 60643743 Email:13619649643@163.com CAS NO.: 71368-80-4 Name: Bromazolam Price: Negotiable Molecular Formula: C17H13BrN4 Molecular Weight: 353.2 Density:1.54±0.1 g/cm3 (20 ℃ 760 Torr) Boiling Point:519.8±60.0 °C(Predicted) Melting Point:272.0-275℃ Purity: 99% usage: Used as pharmaceutical intermediates Appearance: White Powder Minimum Order: 100 Contact:
Phone: Fax: Email: 天津旭森生物科技
中南街道 南开区 3000000 China 11/28/23 1:55 GMT
busbar joint insulation barrier, busbar plug in tap off unit accessories
This joint stack design has taken into the consideration of a bigger contact surface of the conductors in order to reduce power loss and improve cooling performance. Double headed joint bolts together with Belleville washer ensure a sufficient pressure required to secure each joint connection. The double headed joint bolt is also designed with a specific torque value whereby the outer head of the joint bolt (which acts as tightness indication) will shear off when it reaches the limit and this will prevent over tightening of the joint section. Minimum Order: 1000 Contact:
Phone: Fax: Email: Suzhou Kiande Electric Co.,ltd.
No.123 Suzhou Dadao East Road, SIP, Jiangsu P.R., 215028,China Suzhou China 11/28/23 1:48 GMT
Contact:
Phone: Fax: Email: Suzhou Kiande electric Co.,Ltd
No. 123 Suzhou Dadao East Road, SIP, Suzhou City, Jiangsu Province, China suzhou 215028 China 9/6/23 8:21 GMT
Leakage Protection Socket - ASP Series
Leakage Protection Power Cord set (ASP Series) Introducing the AEP-S and AEP-W series Leakage Protection Power Cord Sets. These power cord sets are designed to prioritize electrical safety, offering reliable protection against leakage, overload, and short circuits. The AEP-S series is available in 2P and 2P+E configurations, while the AEP- W series provides options for 2P and 2P+E connections. With a rated current of 15A and compatibility with a voltage range of 100-120V, these power cord sets are suitable for various electrical applications. Equipped with a sensitive trip mechanism, the AEP-S and AEP-W series ensure quick response times within 0.1 second to promptly address electrical faults. The sensitivity current can be adjusted to 15mA or 30mA, providing flexibility in meeting specific requirements. Additionally, the non- operation current is set at 1/2 I△n to prevent unnecessary tripping. Both series feature load terminals, facilitating easy and secure connections. The AEP-S series is designed with 1Φ2W and 1Φ3W wiring options, while the AEP-W series offers 1Φ2W and 1Φ3W configurations. These power cord sets have undergone stringent testing and meet quality standards, evident in their compliance with the standard inspection bureau type test and certification by JET2664-42011-1001. Contact:
Phone: Fax: Email: Arlis Electric Products Co., Ltd.
No. 13, Ln. 90, Nanyang St. Xizhi Dist., New Taipei City 221009 Taiwan 3/23/23 5:42 GMT
PMK ethyl glycidate CAS 28578-16-7 yellow liquid wickr:amy1934 whats/skype:
Whatsapp/Skype:+8617631128779 Telegram:Alice Mia+8617631128779 Email:zime07@hbzimely.com , WickrMe:amy1934 CAS 79-03-8 CAS 62-44-2 CAS 76-42-6 CAS 94-15-5 CAS 96-48-0 CAS 110-63-4 CAS 102-97-6 CAS 103-63-9 CAS 109-65-9 CAS 156-57-0 CAS 439-14-5 CAS 2647-50-9 CAS 2894-61-3 BMK CAS 5413-05-8 CAS 5449-12-7 CAS 16648-44-5 CAS 20320-59-6 CAS 718-08-1 CAS 80532-66-7 PMK CAS 52190-28-0 CAS 28578-16-7 CAS 13605-48-6 CAS 1823274-68-5 CAS 1314093-06-5 CAS 6740-88-1 CAS 9004-61-9 CAS 13415-59-3 CAS 14176-50-2 CAS 14188-81-9 CAS 14530-33-7 CAS 14680-51-4 CAS 14769-73-4 CAS 23076-35-9 CAS 7361-61-7 CAS 28981-97-7 CAS 39243-02-2 CAS 40054-68-0 CAS 40054-69-1 CAS 40054-88-4 CAS 40064-34-4 CAS 288573-56-8 CAS 79099-07-3 CAS 125541-22-2 CAS 49851-31-2 CAS 60142-96-3 CAS 60996-94-3 CAS 71368-80-4 CAS 74163-84-1 CAS 148553-50-8 CAS 1191237-69-0 CAS 1354631-33-6 CAS 119276-01-6 CAS 80456-81-1 2fdck CAS 111982-50-4 3mmc 5cladba or 5cl 5fMDMA NEP eutylone sgt78 bk-md , ma Minimum Order: 1 bags Contact:
Phone: Fax: Email: Hebei ZIMELY Biological Technology Co., Ltd.
HEBEI Shijiazhuang 050000 Switzerland 11/22/22 6:57 GMT
ESP-WROOM-02D
https://www.fr-ebyte.com/products/ESP-WROOM-02D ESP8266EX 32bit TCP IP WIFI to UART Wireless Module esp8266 Low Power Networking WIFI Module ESP [IC]:ESP8266 [Frequency]:2.4 , GHz [Distance]:300m [Interface]: , UART/HSPI/I2C/I2S/IR Remote Control [Introduction]:ESP-WROOM-02D and ESP-WROOM-02U are ESP8266EX-based modules developed by Espressif. Compared to ESP-WROOM-02, the RF performance of ESP-WROOM-02D and ESP-WROOM-02U are optimized. Besides, ESP-WROOM-02U integrates a U.FL connector. Please see Chapter 8 for details of U.FL connector Minimum Order: 12 metric tons Contact:
Phone: Fax: Email: Chengdu Ebyte Electronic Technology Co.,Ltd
Centre d'innovation D347, XI-XIN Avenue No.4, Zone de haute technologie, Chengdu, Sichuan, Chine Chengdu 610017 China 11/15/22 6:52 GMT
Communication module SIM Card Holder 6 Pin
Material: 1. Body: PPS UL 94V-0 Rated, Color: Black 2. Cover: LCP UL 94V-0 Rated, Color: Black 3. Contact: Phosphor Bronze 4. Contact Plating: Gold Plating Over Nickel on Contact Area, Tin Plating on Solder Tail. Spec: 1. Current Rating: 0.5 AMP. Max 2. Dielectric Withstanding Voltage: 500V AC R.M.S For One Minute 3. Insulation Resistance: 1000MΩ Min. AT 500V AC 4. Contact Resistance: 30mΩ Max. 5. Operating Temperature: -25 °C~ +85°C 6. Durability: 5000 Cycles 7. Processing Temp: 260°C for 30~60 Seconds Max We also have GPS Module, GSM Module, Bluetooth Module, 3G Module, GPS mouse, Personal Tracker, Vehicle Tracker, Bluetooth GPS Receiver, GPS Antenna, GSM Antenna, GPS/GSM Antenna, RF Cable, RF Connector etc. Contact:
Phone: Fax: Email: Connectec Electronics Co., Ltd.
7F-2, No.1213, Zhongzheng Rd., Zhonghe Dist., New Taipei City 235, Taiwan New Taipei City Taiwan 7/26/22 2:52 GMT
absorber varnish spill absorb chemical absorbent pad
> Material: 100% polypropylene. > Standard color : Yellow(Customizable). > Function: Absort strong acid,strong base,solidifying liguid and other unknow liquid.Such as:hudrochloric acid,phosphoric acid,98% vitriol ,30% sodium hydroxide,hydrofluoric acid…ect. > Suitable: Clean the chemical and other hazardous liquid,apply to any chemical or hazardous liquid. > Burning after using,ash≤0.02%. *Characteristic : Dimpled only / dimlpled&laminated with spunbond fabic,wearproof and coriaceous. *Suitable : Chemical plant,laboratory...ect some chemical&hazardous spill areas,and clean the chemical&hazardous liquid. *Packing : PE bag/PE bag & carton Contact:
Phone: Fax: Email: Suzhou Hopetopway New Material Co., Ltd.
Shizhong Road, Xukou Town, Wuzhong Suzhou 333125 China 7/6/22 8:28 GMT
2200W 10A 9.5KG WIFI Smart Socket UK Rules Interface With LED Lights
LED Smart Socket 2200W 10A 9.5KG Wi-Fi Smart Socket With Led Lights LED Smart Socket Description: 1. This smart socket can be controlled by a mobile phone, 2. The indicator light is blue, the rated voltage is 10A and the rated power is 2200W. 3. The smart socket can be adjusted freely in a variety of control methods. 4. Smart sockets are compact and simple in appearance, making more home appliances smart. LED Smart Socket Parameters: Rated voltage AC 100-240V Indicator Blue led Voltage frequency 50/60Hz Product size 54*54*52mm Rated current 10A Product weight 0.070Kg Rated power 2200W Color box size 57.5*57.5*55mm Connect way Wi-Fi 2.4GHz Boxing specifications 100 boxes/box Wireless standards IEEE 802.12b/g/n Outer box size 32*31*25.5cm Wireless distance 40m GW 9.5kg , Interface specifications UK rules Solution graffiti Self- , power consumption ≤0.5W APP smart life Shell material Retardant PC AI speaker Amazon Alexa Operating temperature -10~60℃ Certificatio , n ETL,FCC Contact:
Phone: Fax: Email: Shenzhen All-Ready Lighting Technology Co., Ltd
Room 402A, Building B, Shangshui Internation Cultural Creative Industrial Center, No 208 Bulong Road, Buji Street, Longgana District,Shenzhen,China Shenzhen 518000 China SOURCE: Import-Export Bulletin Board (https://www.imexbb.com/)
© 1996-2024 IMEXBB.com. All rights reserved.
|
|