Import-Export Bulletin Board Post an Offer to Sell

New here? Please subscribe
to post trade leads. It's FREE!

Others & Excess Inventory


Home > Offers to Sell > Others & Excess Inventory

Browse leads by category:
 
 
 

Summary of 9/20/19 18:31 GMT:>> Show Compact View
9/20/19 8:14 GMT
Silicone rubber with vacuum casting

Silicone rubber with vacuum casting Silicone Rubber Molding,China Silicone rubber with vacuum casting Mold silicone, specially used for large-scale reproduction of resin, ceramic, plastic, gypsum, cement, candle, soap and other crafts, with high number of times of mold overturn, long service life of the mold, resistance to burning and high temperature, strong resistance to tearing. First, crafts mold silicone use crafts mold silicone, specializing in resin, ceramics, plastics, plaster, cement, candles, soap, lighting and other handicrafts mass reproduction, addition molding and condensation type are suitable for handicraft mold, is an RTV Curing silicone rubber at room temperature. Second, resin crafts mold silicone advantage  1, excellent complex mold, mold effect  2, high mold times, mold life  3, burn resistance and high temperature, especially for unsaturated resin crafts, Boli resin crafts have resistance to burning The advantage of high temperature resistance  4, low shrinkage rate, the silicone mold is not deformed; 5, high strength tear resistance, not easy to tear during the demoulding process

Contact:
Phone:
Fax:
Email:
Emily Ruan
18566753885
0755-27207646
Send Inquiry
Shenzhen Ruitai Mold Technology Co.,Ltd
1103room,tianyue building,zhongxin road,NO 110,sh
Guangzhou, Guangdong, China 518104
China
9/20/19 8:13 GMT
Plastic electronic case with painting

Plastic electronic case with painting Vacuum Casting Mold,Vacuum Casting Service The complex mold is to use the original sample plate to make a silicone mold under vacuum condition, and to pour the PU material under vacuum, thereby cloning the same copy of the original plate, which is higher in temperature resistance and hardness than the original plate. If the customer asks to do a few sets or dozens of sets, it is suitable to use this method, which greatly reduces the cost. The product model of vacuum multi- module has a certain proportion of shrinkage. The cost of vacuum replicating product model is generally lower than that of CNC. That is, the price of CNC processing multiple sets of samples is lower than the price of vacuum-module after CNC machining 1 set (right) Except when there are special requirements for the sample material produced by the complex mold); The composite materials are: ordinary PU: brittle, tough; transparent PU: good raw materials, but the price is the most expensive; rubber-like PU; 8400 soft rubber. The technique of vacuum complex molding can be used for two purposes: 1. Produce small batches of product samples; 2. Change the material; the template carved from gypsum sludge can be changed by the complex mold to the PU or POLY material which is easy to be processed later, or the ABS material can be changed to a material with special requirements (such as: requiring transparent, high temperature resistance) , high strength, or rubber properties, etc.).

Contact:
Phone:
Fax:
Email:
Emily Ruan
18566753885
0755-27207646
Send Inquiry
Shenzhen Ruitai Mold Technology Co.,Ltd
1103room,tianyue building,zhongxin road,NO 110,sh
Guangzhou, Guangdong, China 518104
China
9/20/19 8:09 GMT
CNC ABS Robot Prototype

CNC ABS Robot Prototype ABS Robot Prototype,ABS Rapid Prototypes Project name:robot prototype model Material:ABS;PMMA;steel Surface treatment:polish,highly polished on the PMMA;painting;silk screen; PRODUCT DESCRIPTION How to make a robot? Define the specifications after determining the purpose Shape design (sketch, prototype, rendering) Join the stack of hardware devices (that is, put the hardware needed inside the robot) Modify the design Making prototype robot machine (that is, manually creating several test machines) EVT test DVT,DMT test Confirm BOM list MVT test Modify BOM list PVT test Mass production After get the PO,we will start to make the program list-CNC machining-assemble work-polish

Contact:
Phone:
Fax:
Email:
Emily Ruan
18566753885
0755-27207646
Send Inquiry
Shenzhen Ruitai Mold Technology Co.,Ltd
1103room,tianyue building,zhongxin road,NO 110,sh
Guangzhou, Guangdong, China 518104
China
9/20/19 8:09 GMT
PMMA plastic prototype

PMMA plastic prototype CNC PMMA Plastic Prototype,Rapid Plastic Prototype Manufacturer Our high seed precision CNC Milling and turning services are perfect for both one off prototypes and low mass volume production runs. We machined parts from many different plastic and metal materials on our state of the art machining finishes available CNC Machining is a very versatile option. PRODUCT DESCRIPTION Our high seed precision CNC Milling and turning services are perfect for both one off prototypes and low mass volume production runs. We machined parts from many different plastic and metal materials on our state of the art machining finishes available CNC Machining is a very versatile option. Fast, accurate and competitively priced whilst delivering superior surface finishes from a massive range of material options, CNC Machining is the backbone of Ruitai mold'S services Total sets of CNC machine: 30 sets Tolerance: +/-0.02mm Max size: 3500mm * 2500mm * 1200mm  Working time: 24 hours all day Advantage: high accurate tolerance Fast turn around Wide materials can be choose  from Highly Experienced Engineers QA/QC < 0.1 Reject Rate ISO Certified Quality

Contact:
Phone:
Fax:
Email:
Emily Ruan
18566753885
0755-27207646
Send Inquiry
Shenzhen Ruitai Mold Technology Co.,Ltd
1103room,tianyue building,zhongxin road,NO 110,sh
Guangzhou, Guangdong, China 518104
China
9/20/19 8:09 GMT
Plastic ABS Prototype Samples With CNC Machined

Plastic ABS Prototype Samples With CNC Machined ABS Rapid Prototypes,ABS Robot Prototype CNC prototype manufacturing is a method of using a CNC machine to reduce excess data by subtractive material manufacturing. CNC processing speed, low cost, processing materials have high strength, high temperature resistance, high toughness PRODUCT DESCRIPTION CNC prototype manufacturing is a method of using a CNC machine to reduce excess data by subtractive material manufacturing. CNC processing speed, low cost, processing materials have high strength, high temperature resistance, high toughness, bright and other requirements; and CNC model can be processed in a variety of ways, such as grinding, painting, sandblasting, oxidation, polishing, silk screen, UV, Electroplating, etc., can function as the same mold product; in the appearance, equipment, and function verification, the customer's concept can be completed; therefore, CNC hand board processing is the first method of modern hand board proofing. Project name: plastic ABS prototype samples Tolerance: +/-0.1MM Leading time: 7 working days Machined way: CNC machining MOQ: 1 set Payment terms: full payment before delivery

Contact:
Phone:
Fax:
Email:
Emily Ruan
18566753885
0755-27207646
Send Inquiry
Shenzhen Ruitai Mold Technology Co.,Ltd
1103room,tianyue building,zhongxin road,NO 110,sh
Guangzhou, Guangdong, China 518104
China
9/20/19 8:09 GMT
PC prototype with paint surface

PC prototype with paint surface PC Rapid Prototyping,CNC Plastic prototyping With the development of industrial society and the continuous improvement of living standards, people's demand for life products and their desire for innovation are also growing. Then there will be processing enterprises, mainly satisfied with the development of new products with the development of technology Material :PC  Surface treatment:polish-painting-silk screen  Package:wood box or carton box With the development of industrial society and the continuous improvement of living standards, people's demand for life products and their desire for innovation are also growing. Then there will be processing enterprises, mainly satisfied with the development of new products with the development of technology, to serve enterprises in different fields such as design, development, manufacturing, etc., to develop new products or improve them. Existing products, as well as designing new products, give full support and support in model production and model making, create mutual value and achieve a win-win situation. Each company's products are different, and the hand model to be produced is different, so the materials may be different, but the main processing materials include the following: (1) ABS: It is widely used in general product casings and has good welding strength. It can be applied to surface metallization projects such as water plating and vacuum evaporation plating. The material specifications include plates and round bars. (2) PMMA: Acrylic, or plexiglass. It is a good transparent piece, and the material for the best transparency can be applied by dyeing, electroplating, spraying, screen printing and the like. The welding strength is still acceptable, only the brittle and fragile is its weakness, and it is not suitable for use in fragile parts such as hooks. (3) PP: Translucent material, excellent impact resistance, excellent flexibility, can be applied to the production requirements of strict impact resistance, such as: automotive supplies, folding packaging boxes, etc. (4) PC: Material with good strength, toughness and transparency, suitable for parts made of Lens and fine structure. In addition, glass fiber is added to improve the rigidity and heat resistance of the sheet, and it can be used to produce parts that require high steelity in a high temperature environment.

Contact:
Phone:
Fax:
Email:
Emily Ruan
18566753885
0755-27207646
Send Inquiry
Shenzhen Ruitai Mold Technology Co.,Ltd
1103room,tianyue building,zhongxin road,NO 110,sh
Guangzhou, Guangdong, China 518104
China
9/20/19 8:09 GMT
Rapid Plastic Prototype Maker

Rapid Plastic Prototype Maker Plastic ABS Prototype,CNC Plastic prototyping The principle of 3D printing is made by using special materials, layer by layer of "stacking", commonly known as additive manufacturing. Simply speaking, the CNC machining principle is to cut and process the entire piece of material into a specified shape of the product, also known as reduced material manufacturing. PRODUCT DESCRIPTION What is the difference between 3D print and CNC machining The principle of 3D printing is made by using special materials, layer by layer of "stacking", commonly known as additive manufacturing. Simply speaking, the CNC machining principle is to cut and process the entire piece of material into a specified shape of the product, also known as reduced material manufacturing. 3D printing seems to have more advantages than CNC machining, but in reality, why is CNC machining still the preferred process for enterprises? The reasons are as follows: 1.Economic advantage When processing large and heavy parts, CNC processing prices are much more favorable than 3D printing. 2. Processing standard CNC machining has evolved over a long period of time and a complete set of standards has been developed in the industry, including spindles, tools and control systems. But 3D printing does not currently have such a molding standard. 3. Awareness Many enterprises are completely in a strange stage for 3D printing. Due to unfamiliarity and distrust of this process, they often choose CNC machining that they are familiar with and understand when they face the choice.

Contact:
Phone:
Fax:
Email:
Emily Ruan
18566753885
0755-27207646
Send Inquiry
Shenzhen Ruitai Mold Technology Co.,Ltd
1103room,tianyue building,zhongxin road,NO 110,sh
Guangzhou, Guangdong, China 518104
China
9/20/19 8:09 GMT
PA66+GF30% with SLS printed

PA66+GF30% with SLS printed SLS 3D Printing,3D Print Part name: Automobile intake manifold Industry: automotive Tolerance:+/-0.01 MOQ:1-10 pcs Material:PA66+GF30% Alternative material: PA/nylon PRODUCT DESCRIPTION 3D printing usually refers to the use of low-cost, simple-function desktop-level equipment for additive manufacturing, that is, mass-produced, popular version of additive manufacturing. It sounds simple, but the use of 3D printing is so much that you can’t think of it. First lay a layer of powder, then use the nozzle to spray the adhesive on the area to be formed, let the material powder bond, form the cross section of the part, and then repeat the process of powder coating, spraying, bonding, layer stacking, and finally print. The parts that came out.

Contact:
Phone:
Fax:
Email:
Emily Ruan
18566753885
0755-27207646
Send Inquiry
Shenzhen Ruitai Mold Technology Co.,Ltd
1103room,tianyue building,zhongxin road,NO 110,sh
Guangzhou, Guangdong, China 518104
China
9/20/19 8:09 GMT
Building design work with SLA printed

Building design work with SLA printed 3D Printing Mold,Metal Material With 3D Print The photocuring technology mainly uses photosensitive resin as a material, and transmits the temperature to the liquid resin through ultraviolet light or other light source through multi-lens reflection, and then solidifies and solidifies layer by layer to finally obtain a complete product. PRODUCT DESCRIPTION It is not uncommon for 3D printing technology to be used for modeling, but it is a rare thing to build a house. In October this year, a villager in Jiangxi built a house with 3D printing technology. The entire house is constructed of steel and 3D printing technology, without a brick and without the need to dismantle the building formwork. 3D house construction has a shorter construction period and lower prices than traditional buildings. The same four-story building, the traditional way to take at least 4 months, single-square meter budget is over a thousand; using 3D printing technology only 20 days, 600 yuan per square meter. And because the house is poured in one piece, it has great advantages in earthquake resistance. Imagine if 3D printing technology is more mature, can those rooms that were previously only in the imagination can be printed? In the future, you may be able to build a fairytale castle yourself.

Contact:
Phone:
Fax:
Email:
Emily Ruan
18566753885
0755-27207646
Send Inquiry
Shenzhen Ruitai Mold Technology Co.,Ltd
1103room,tianyue building,zhongxin road,NO 110,sh
Guangzhou, Guangdong, China 518104
China
9/20/19 8:09 GMT
Home appliance model with 3D painted

Home appliance model with 3D painted SLA 3D Printin,Home appliance model with 3D painted Manufacturer In the early stage of prototyping, a 3D data model is built in the computer, which can directly dismantle the parts and components, instead of manual experience, and avoid manual omission through intuitive and visual electronic supervision.PRODUCT DESCRIPTION There are two main advantages to using 3D printing: 1. Shorten the production cycle and improve efficiency In the early stage of prototyping, a 3D data model is built in the computer, which can directly dismantle the parts and components, instead of manual experience, and avoid manual omission through intuitive and visual electronic supervision. Manual corrections can take hours or even days of work. The prototype can be quickly corrected by electronic adjustment. After the modeling is completed, it can be printed directly. It can be said that the production time is quite saved. 2, the threshold is low, adapt to the development of modern society The threshold for traditional hand-made production is relatively high, and it requires the styling ability of the prototype. There are also many tricks in the actual production process. For example, "partition", it is not only OK to assemble, so is the part beautiful? Late volume capacity cannot be achieved? Many factors, such as the difficulty control of large-scale painting, should be considered. The requirements of 3D modeling relative to pure hand-made are much lower. As long as you can operate 3D software more skillfully and have a certain modeling foundation, you can create a hand through 3D printing. Now it is also because it is relatively high-handed, and it can maximize its advantages in the later stage, and can adapt to the future development needs of the hand-held industry.

Contact:
Phone:
Fax:
Email:
Emily Ruan
18566753885
0755-27207646
Send Inquiry
Shenzhen Ruitai Mold Technology Co.,Ltd
1103room,tianyue building,zhongxin road,NO 110,sh
Guangzhou, Guangdong, China 518104
China
9/20/19 8:09 GMT
Nylon with SLS print

Nylon with SLS print SLS Nylon 3D Printing,Nylon with SLS print Factory 1) It is the earliest 3D printing technology with high maturity; 2) Good surface quality and high precision (around 0.1mm); PRODUCT DESCRIPTION In all 3D printing technologies, SLA can be considered the gold standard: 1) It is the earliest 3D printing technology with high maturity; 2) Good surface quality and high precision (around 0.1mm); 3) The diversity of printed materials, with a wide range of functional materials, can be selected according to their needs; 4) Prototype generated directly from CAD data, fast processing speed, short production cycle, and no secondary processing of cutting tools. But the shortcomings of the same SLA technology are also obvious: 1) The system is expensive and the maintenance cost is high; 2) High environmental requirements, toxicity and odor, and need to be enclosed; 3) The operation of the software is complicated and requires a certain degree of professionalism. Of course, the above are all for professional 3D printers. With more and more people knowing and using 3D printing, more desktop-level printers are beginning to appear in the hands of makers, and even more people start themselves. DIY

Contact:
Phone:
Fax:
Email:
Emily Ruan
18566753885
0755-27207646
Send Inquiry
Shenzhen Ruitai Mold Technology Co.,Ltd
1103room,tianyue building,zhongxin road,NO 110,sh
Guangzhou, Guangdong, China 518104
China
9/20/19 7:53 GMT
Metal material with 3D print

Metal material with 3D print 3D Printing Mold,SLS 3D Printing Metal 3D printing allows unparallel opportunities in all manner of industries including automotive, aerospace and medical. PRODUCT DESCRIPTION Ruitai mold offer metal 3D printing from Renishaw and EOS machines. Metal 3D printing allows unparallel opportunities in all manner of industries including automotive, aerospace and medical. Ruitai mold works closely with research partners and universities in China to ensure we are at the forefront of this technology in Asia. Ruitai mold became one of the pioneers of 3D printing technology in China introducing our first SLA machine in 2005.  Build Envelope: 450x450x300mm Tolerance: ± 0.01mm Materials: EP06, Somos 14120, Nylon, Metal... Advantage: High Speed/ High Precision                    Complex Geometries/ Material Reduction Options                    Both Cosmetic and Structural Parts Recently, researchers have made a "breakthrough" in the field of 3D printing of 316L stainless steel: 3D printing 316L stainless steel can provide a higher level of strength and ductility than other forms of steel! The combination of 3D printing and emerging materials may produce better results. Many research institutions now hope to improve material performance through 3D printing technology. These studies are expected to further expand the market application space for 3D printing, thereby stimulating the market growth of metal 3D printing technology. In the future, 3D printing may bring us more surprises.

Contact:
Phone:
Fax:
Email:
Emily Ruan
18566753885
0755-27207646
Send Inquiry
Shenzhen Ruitai Mold Technology Co.,Ltd
1103room,tianyue building,zhongxin road,NO 110,sh
Guangzhou, Guangdong, China 518104
China
9/20/19 7:52 GMT
Share Exports 99.9% pure Hydrogen Chloride gas in cylinder from China

Quick Details Classification:Hydrochloric Acid  CAS No.:7647-01-0  Other Names: muriatic acid MF:HCL EINECS No.:231-595-7 Place of Origin:Shandong, China (Mainland) Grade Standard:Agriculture Grade, Food Grade, Medicine Grade, Reagent Grade Purity:99.9 Appearance:gases Applic , ation:dye Brand Name:yanhe Model Number:lc-054 Packaging Details:cylinders Color:colorless UN NO:1050 Usage:industrial Size:44L Experie , nces:29 years Quality:Prime Form:gas Certificate: , SGS MSDS COA HS Code:2806100000Packaging & DeliverySelling Units: Single item Single package size:  11X11X11 cm Single gross weight: 79.0 kg Physical & Chemical Properties   Colorless, toxic, irritating, smothering, non-flammable gas: strong hygroscopic, after absorbing the moisture in the air, hydrochloric acid is generated, with strong corrosiveness. Stored in cylinders in the form of liquefied gas, pressure (3-6MPa) is constant, and its value is related to temperature.Inorganic compounds such as tin chloride, phosphorus trioxide, phosphorus bromide, and so on, and organic compounds such as paraffin, ethanol, ether, acetaldehyde, ketone, acid, ester, nitrite, cyano, etc. can be dissolved well in hydrogen chloride, and additional reaction can occur. Pure liquid hydrogen chloride does not react with most metals. However, it reacts with alkali metals, aluminum, manganese, iron, copper, tin, lead and zinc and produces a protective film of chloride on its surface. When water is present, it reacts with metal to form metal chloride and hydrogen gas. Use & Storage   The storage room for hydrogen chloride cylinder should be ventilated and dry, avoid direct sunlight, and there should be no underground trenches or secret passages. Open fire is strictly forbidden and away from heat source. Cylinder should be placed vertically, with the cap, properly fixed, prevent dumping. When using, connect the exhaust nozzle of the cylinder valve with the production device. Gas leakage is strictly prohibited. When used, the ambient temperature is between -20 degrees Celsius and 40 degrees Celsius Avoid sun exposure and stay at least 10 meters away from an open flame. The gas in the bottle shall not be used up, and the pressure shall be kept at not less than 0.5mpa. For the intermittent system, the air of the high-purity nitrogen replacement system should be used first, and then the hydrogen chloride should be used to enter the system and discharge nitrogen, so that the system can carry out normal production. After production, hydrogen chloride in the high purity nitrogen replacement system is used to prevent system corrosion. After use, close the cylinder valve in time, remove the cylinder from the system

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Fanyiran
05337246752

Send Inquiry
Zibo Dijia Special Gas Co., Ltd.
708, NO.9, NO.818, LINZI AVENUE, ZIBO CITY, SHANDONG PROVINCE, CHINA.
zibo 255400
China
9/20/19 6:43 GMT
Chemicals gas of high quality export Hydrogen chloride gas

Quick Details Classification:Hydrochloric Acid  CAS No.:7647-01-0  Other Names: muriatic acid MF:HCL EINECS No.:231-595-7 Place of Origin:Shandong, China (Mainland) Grade Standard:Agriculture Grade, Food Grade, Medicine Grade, Reagent Grade Purity:99.9 Appearance:gases Applic , ation:dye Brand Name:yanhe Model Number:lc-054 Packaging Details:cylinders Color:colorless UN NO:1050 Usage:industrial Size:44L Experie , nces:29 years Quality:Prime Form:gas Certificate: , SGS MSDS COA HS Code:2806100000Packaging & DeliverySelling Units: Single item Single package size:  11X11X11 cm Single gross weight: 79.0 kg Physical & Chemical Properties   Colorless, toxic, irritating, smothering, non-flammable gas: strong hygroscopic, after absorbing the moisture in the air, hydrochloric acid is generated, with strong corrosiveness. Stored in cylinders in the form of liquefied gas, pressure (3-6MPa) is constant, and its value is related to temperature.Inorganic compounds such as tin chloride, phosphorus trioxide, phosphorus bromide, and so on, and organic compounds such as paraffin, ethanol, ether, acetaldehyde, ketone, acid, ester, nitrite, cyano, etc. can be dissolved well in hydrogen chloride, and additional reaction can occur. Pure liquid hydrogen chloride does not react with most metals. However, it reacts with alkali metals, aluminum, manganese, iron, copper, tin, lead and zinc and produces a protective film of chloride on its surface. When water is present, it reacts with metal to form metal chloride and hydrogen gas. Use & Storage   The storage room for hydrogen chloride cylinder should be ventilated and dry, avoid direct sunlight, and there should be no underground trenches or secret passages. Open fire is strictly forbidden and away from heat source. Cylinder should be placed vertically, with the cap, properly fixed, prevent dumping. When using, connect the exhaust nozzle of the cylinder valve with the production device. Gas leakage is strictly prohibited. When used, the ambient temperature is between -20 degrees Celsius and 40 degrees Celsius Avoid sun exposure and stay at least 10 meters away from an open flame. The gas in the bottle shall not be used up, and the pressure shall be kept at not less than 0.5mpa. For the intermittent system, the air of the high-purity nitrogen replacement system should be used first, and then the hydrogen chloride should be used to enter the system and discharge nitrogen, so that the system can carry out normal production. After production, hydrogen chloride in the high purity nitrogen replacement system is used to prevent system corrosion. After use, close the cylinder valve in time, remove the cylinder from the system

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Fanyiran
05337246752

Send Inquiry
Zibo Dijia Special Gas Co., Ltd.
708, NO.9, NO.818, LINZI AVENUE, ZIBO CITY, SHANDONG PROVINCE, CHINA.
zibo 255400
China
9/20/19 6:33 GMT
2019 Exports 99.9% pure Hydrogen Chloride gas from China

Quick Details Classification:Hydrochloric Acid  CAS No.:7647-01-0  Other Names: muriatic acid MF:HCL EINECS No.:231-595-7 Place of Origin:Shandong, China (Mainland) Grade Standard:Agriculture Grade, Food Grade, Medicine Grade, Reagent Grade Purity:99.9 Appearance:gases Applic , ation:dye Brand Name:yanhe Model Number:lc-054 Packaging Details:cylinders Color:colorless UN NO:1050 Usage:industrial Size:44L Experie , nces:29 years Quality:Prime Form:gas Certificate: , SGS MSDS COA HS Code:2806100000Packaging & DeliverySelling Units: Single item Single package size:  11X11X11 cm Single gross weight: 79.0 kg Physical & Chemical Properties   Colorless, toxic, irritating, smothering, non-flammable gas: strong hygroscopic, after absorbing the moisture in the air, hydrochloric acid is generated, with strong corrosiveness. Stored in cylinders in the form of liquefied gas, pressure (3-6MPa) is constant, and its value is related to temperature.Inorganic compounds such as tin chloride, phosphorus trioxide, phosphorus bromide, and so on, and organic compounds such as paraffin, ethanol, ether, acetaldehyde, ketone, acid, ester, nitrite, cyano, etc. can be dissolved well in hydrogen chloride, and additional reaction can occur. Pure liquid hydrogen chloride does not react with most metals. However, it reacts with alkali metals, aluminum, manganese, iron, copper, tin, lead and zinc and produces a protective film of chloride on its surface. When water is present, it reacts with metal to form metal chloride and hydrogen gas. Use & Storage   The storage room for hydrogen chloride cylinder should be ventilated and dry, avoid direct sunlight, and there should be no underground trenches or secret passages. Open fire is strictly forbidden and away from heat source. Cylinder should be placed vertically, with the cap, properly fixed, prevent dumping. When using, connect the exhaust nozzle of the cylinder valve with the production device. Gas leakage is strictly prohibited. When used, the ambient temperature is between -20 degrees Celsius and 40 degrees Celsius Avoid sun exposure and stay at least 10 meters away from an open flame. The gas in the bottle shall not be used up, and the pressure shall be kept at not less than 0.5mpa. For the intermittent system, the air of the high-purity nitrogen replacement system should be used first, and then the hydrogen chloride should be used to enter the system and discharge nitrogen, so that the system can carry out normal production. After production, hydrogen chloride in the high purity nitrogen replacement system is used to prevent system corrosion. After use, close the cylinder valve in time, remove the cylinder from the system

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Fanyiran
05337246752

Send Inquiry
Zibo Dijia Special Gas Co., Ltd.
708, NO.9, NO.818, LINZI AVENUE, ZIBO CITY, SHANDONG PROVINCE, CHINA.
zibo 255400
China


SOURCE: Import-Export Bulletin Board (http://www.imexbb.com/)
Result Page:   << Previous   |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   10  |   11  |   Next >>

Post an Offer to Sell
Home - Offers to Buy - Business Opportunities - Company Profiles

© 1996-2019 IMEXBB.com. All rights reserved.

IMEXBB.com