Import-Export Bulletin Board Post an Offer to Sell

New here? Please subscribe
to post trade leads. It's FREE!

Home & Garden Supplies


Home > Offers to Sell > Home & Garden Supplies

Browse leads by category:
    
    
    
    
  

Summary of 3/21/19 7:54 GMT:>> Show Compact View
3/20/19 11:12 GMT
Soft plastic tree support holder of sets cup 6.5cm diameter ZCM-65R

Tree protection support system: Designed to protect the foundation of the new plant and the law of vertical growth of trees,On this basis, the scientific design of the three components, Comparing with the traditional similar support method, it is more beautiful and tidy。Selection of profiles to refresh the new standards of similar technology,In line with the scientific, economic, energy saving, environmental protection and efficient development concept advocated by the modern society。 Product functions: The product system is made of sets of cups, bandages, wood pillar.The cup is made of injection of soft material made from synthetic resin series,Simple operation, only four steps to complete the installation,effective protection of the normal growth of seedlings,The two form a stable whole, which greatly saves the construction process and cost.The cup part of the product can be used again and again for a period of 3-5 years. At the same time, it is resistant to heat and cold, high temperature 120 ℃, low temperature -50℃. Product part: set cup--tree support holder It is made of update PP material. It is both heat-resisting and cold- resisting.nondiscoloring and nondeformation, strong and durable,can be used more times. Specification: It is divided into eight kinds by different inner diameter size and material as belows: A: hard plastic ZCM-65 inner diameter size: 65mm ZCM-53 inner diameter size:53mm ZCM-43 inner diameter size:43mm ZCM-38 inner diameter size:38mm B: soft plastic ZCM-65R inner diameter size: 65mm ZCM-53R inner diameter size:53mm ZCM-43R inner diameter size:43mm ZCM-38R inner diameter size:38mm Product part: bandage (strap) It is made of pp and nylon material. Tough and durable Specification : Model No: Z-100 : 100 centimeter bangage suitable for tree trunk under 22 centimeter. Model No:Z-80 : 80 centimeter bangage suitable for tree trunk under 22 centimeter. Model No:Z-50 : 50 centimeter bangage suitable for tree trunk under 12 centimeter. Install steps: The installation is simple, no need of other materials, only a few steps easy to complete the installation, reduce installation costs. 1.put the support wood into the cover cup, fix the screws (to prevent the loss of the support wood and firm after installation) 2.Put the necessary 3-4 pillars in the corresponding height. 3.After wearing a bandage, then fix cover cup position and adjust the tightness of the bandage 4.After fastening bandage,then insert the rest of bandage into the cover cup to complete the whole installation Application: Landscape engineering, support seedlings, anti - fall, and promote survival. Anti typhoon, transplant necessary Features: 1. Reasonable design, strong support. 2. Beautiful, uniform and tidy 3. Simple and quick operation and save labor cost.

Minimum Order: 10000

Contact:
Phone:
Fax:
Email:
Mike Peng
86-013961495796
86-0519-86686323
Send Inquiry
Changzhou Sakawa Yoshi garden equipment
Jiaze town,Wujiang district
Changzhou 213000
China
3/20/19 11:12 GMT
50cm tree strap or waistband together with sets cup Z-50

Tree protection support system: Designed to protect the foundation of the new plant and the law of vertical growth of trees,On this basis, the scientific design of the three components, Comparing with the traditional similar support method, it is more beautiful and tidy。Selection of profiles to refresh the new standards of similar technology,In line with the scientific, economic, energy saving, environmental protection and efficient development concept advocated by the modern society。 Product functions: The product system is made of sets of cups, bandages, wood pillar.The cup is made of injection of soft material made from synthetic resin series,Simple operation, only four steps to complete the installation,effective protection of the normal growth of seedlings,The two form a stable whole, which greatly saves the construction process and cost.The cup part of the product can be used again and again for a period of 3-5 years. At the same time, it is resistant to heat and cold, high temperature 120 ℃, low temperature -50℃. Product part: set cup--tree support holder It is made of update PP material. It is both heat-resisting and cold- resisting.nondiscoloring and nondeformation, strong and durable,can be used more times. Specification: It is divided into eight kinds by different inner diameter size and material as belows: A: hard plastic ZCM-65 inner diameter size: 65mm ZCM-53 inner diameter size:53mm ZCM-43 inner diameter size:43mm ZCM-38 inner diameter size:38mm B: soft plastic ZCM-65R inner diameter size: 65mm ZCM-53R inner diameter size:53mm ZCM-43R inner diameter size:43mm ZCM-38R inner diameter size:38mm Product part: bandage (strap) It is made of pp and nylon material. Tough and durable Specification : Model No: Z-100 : 100 centimeter bangage suitable for tree trunk under 22 centimeter. Model No:Z-80 : 80 centimeter bangage suitable for tree trunk under 22 centimeter. Model No:Z-50 : 50 centimeter bangage suitable for tree trunk under 12 centimeter. Install steps: The installation is simple, no need of other materials, only a few steps easy to complete the installation, reduce installation costs. 1.put the support wood into the cover cup, fix the screws (to prevent the loss of the support wood and firm after installation) 2.Put the necessary 3-4 pillars in the corresponding height. 3.After wearing a bandage, then fix cover cup position and adjust the tightness of the bandage 4.After fastening bandage,then insert the rest of bandage into the cover cup to complete the whole installation Application: Landscape engineering, support seedlings, anti - fall, and promote survival. Anti typhoon, transplant necessary Features: 1. Reasonable design, strong support. 2. Beautiful, uniform and tidy 3. Simple and quick operation and save labor cost.

Minimum Order: 3000

Contact:
Phone:
Fax:
Email:
Mike Peng
86-013961495796
86-0519-86686323
Send Inquiry
Changzhou Sakawa Yoshi garden equipment
Jiaze town,Wujiang district
Changzhou 213000
China
3/20/19 11:12 GMT
80cm garden tree strap or bandage or belt or waistband Z-80

Tree protection support system: Designed to protect the foundation of the new plant and the law of vertical growth of trees,On this basis, the scientific design of the three components, Comparing with the traditional similar support method, it is more beautiful and tidy。Selection of profiles to refresh the new standards of similar technology,In line with the scientific, economic, energy saving, environmental protection and efficient development concept advocated by the modern society。 Product functions: The product system is made of sets of cups, bandages, wood pillar.The cup is made of injection of soft material made from synthetic resin series,Simple operation, only four steps to complete the installation,effective protection of the normal growth of seedlings,The two form a stable whole, which greatly saves the construction process and cost.The cup part of the product can be used again and again for a period of 3-5 years. At the same time, it is resistant to heat and cold, high temperature 120 ℃, low temperature -50℃. Product part: set cup--tree support holder It is made of update PP material. It is both heat-resisting and cold- resisting.nondiscoloring and nondeformation, strong and durable,can be used more times. Specification: It is divided into eight kinds by different inner diameter size and material as belows: A: hard plastic ZCM-65 inner diameter size: 65mm ZCM-53 inner diameter size:53mm ZCM-43 inner diameter size:43mm ZCM-38 inner diameter size:38mm B: soft plastic ZCM-65R inner diameter size: 65mm ZCM-53R inner diameter size:53mm ZCM-43R inner diameter size:43mm ZCM-38R inner diameter size:38mm Product part: bandage (strap) It is made of pp and nylon material. Tough and durable Specification : Model No: Z-100 : 100 centimeter bangage suitable for tree trunk under 22 centimeter. Model No:Z-80 : 80 centimeter bangage suitable for tree trunk under 22 centimeter. Model No:Z-50 : 50 centimeter bangage suitable for tree trunk under 12 centimeter. Install steps: The installation is simple, no need of other materials, only a few steps easy to complete the installation, reduce installation costs. 1.put the support wood into the cover cup, fix the screws (to prevent the loss of the support wood and firm after installation) 2.Put the necessary 3-4 pillars in the corresponding height. 3.After wearing a bandage, then fix cover cup position and adjust the tightness of the bandage 4.After fastening bandage,then insert the rest of bandage into the cover cup to complete the whole installation Application: Landscape engineering, support seedlings, anti - fall, and promote survival. Anti typhoon, transplant necessary Features: 1. Reasonable design, strong support. 2. Beautiful, uniform and tidy 3. Simple and quick operation and save labor cost.

Minimum Order: 3000

Contact:
Phone:
Fax:
Email:
Mike Peng
86-013961495796
86-0519-86686323
Send Inquiry
Changzhou Sakawa Yoshi garden equipment
Jiaze town,Wujiang district
Changzhou 213000
China
3/20/19 11:11 GMT
PP strap with 100cm for garden tree fixer with sets cup Z-100

Tree protection support system: Designed to protect the foundation of the new plant and the law of vertical growth of trees,On this basis, the scientific design of the three components, Comparing with the traditional similar support method, it is more beautiful and tidy。Selection of profiles to refresh the new standards of similar technology,In line with the scientific, economic, energy saving, environmental protection and efficient development concept advocated by the modern society。 Product functions: The product system is made of sets of cups, bandages, wood pillar.The cup is made of injection of soft material made from synthetic resin series,Simple operation, only four steps to complete the installation,effective protection of the normal growth of seedlings,The two form a stable whole, which greatly saves the construction process and cost.The cup part of the product can be used again and again for a period of 3-5 years. At the same time, it is resistant to heat and cold, high temperature 120 ℃, low temperature -50℃. Product part: set cup--tree support holder It is made of update PP material. It is both heat-resisting and cold- resisting.nondiscoloring and nondeformation, strong and durable,can be used more times. Specification: It is divided into eight kinds by different inner diameter size and material as belows: A: hard plastic ZCM-65 inner diameter size: 65mm ZCM-53 inner diameter size:53mm ZCM-43 inner diameter size:43mm ZCM-38 inner diameter size:38mm B: soft plastic ZCM-65R inner diameter size: 65mm ZCM-53R inner diameter size:53mm ZCM-43R inner diameter size:43mm ZCM-38R inner diameter size:38mm Product part: bandage (strap) It is made of pp and nylon material. Tough and durable Specification : Model No: Z-100 : 100 centimeter bangage suitable for tree trunk under 22 centimeter. Model No:Z-80 : 80 centimeter bangage suitable for tree trunk under 22 centimeter. Model No:Z-50 : 50 centimeter bangage suitable for tree trunk under 12 centimeter. Install steps: The installation is simple, no need of other materials, only a few steps easy to complete the installation, reduce installation costs. 1.put the support wood into the cover cup, fix the screws (to prevent the loss of the support wood and firm after installation) 2.Put the necessary 3-4 pillars in the corresponding height. 3.After wearing a bandage, then fix cover cup position and adjust the tightness of the bandage 4.After fastening bandage,then insert the rest of bandage into the cover cup to complete the whole installation Application: Landscape engineering, support seedlings, anti - fall, and promote survival. Anti typhoon, transplant necessary Features: 1. Reasonable design, strong support. 2. Beautiful, uniform and tidy 3. Simple and quick operation and save labor cost.

Minimum Order: 3000

Contact:
Phone:
Fax:
Email:
Mike Peng
86-013961495796
86-0519-86686323
Send Inquiry
Changzhou Sakawa Yoshi garden equipment
Jiaze town,Wujiang district
Changzhou 213000
China
3/20/19 11:11 GMT
PP tree fixer sets cup inner diameter 3.8cm ZCM-38

Tree protection support system: Designed to protect the foundation of the new plant and the law of vertical growth of trees,On this basis, the scientific design of the three components, Comparing with the traditional similar support method, it is more beautiful and tidy。Selection of profiles to refresh the new standards of similar technology,In line with the scientific, economic, energy saving, environmental protection and efficient development concept advocated by the modern society。 Product functions: The product system is made of sets of cups, bandages, wood pillar.The cup is made of injection of soft material made from synthetic resin series,Simple operation, only four steps to complete the installation,effective protection of the normal growth of seedlings,The two form a stable whole, which greatly saves the construction process and cost.The cup part of the product can be used again and again for a period of 3-5 years. At the same time, it is resistant to heat and cold, high temperature 120 ℃, low temperature -50℃. Product part: set cup--tree support holder It is made of update PP material. It is both heat-resisting and cold- resisting.nondiscoloring and nondeformation, strong and durable,can be used more times. Specification: It is divided into eight kinds by different inner diameter size and material as belows: A: hard plastic ZCM-65 inner diameter size: 65mm ZCM-53 inner diameter size:53mm ZCM-43 inner diameter size:43mm ZCM-38 inner diameter size:38mm B: soft plastic ZCM-65R inner diameter size: 65mm ZCM-53R inner diameter size:53mm ZCM-43R inner diameter size:43mm ZCM-38R inner diameter size:38mm Product part: bandage (strap) It is made of pp and nylon material. Tough and durable Specification : Model No: Z-100 : 100 centimeter bangage suitable for tree trunk under 22 centimeter. Model No:Z-80 : 80 centimeter bangage suitable for tree trunk under 22 centimeter. Model No:Z-50 : 50 centimeter bangage suitable for tree trunk under 12 centimeter. Install steps: The installation is simple, no need of other materials, only a few steps easy to complete the installation, reduce installation costs. 1.put the support wood into the cover cup, fix the screws (to prevent the loss of the support wood and firm after installation) 2.Put the necessary 3-4 pillars in the corresponding height. 3.After wearing a bandage, then fix cover cup position and adjust the tightness of the bandage 4.After fastening bandage,then insert the rest of bandage into the cover cup to complete the whole installation Application: Landscape engineering, support seedlings, anti - fall, and promote survival. Anti typhoon, transplant necessary Features: 1. Reasonable design, strong support. 2. Beautiful, uniform and tidy 3. Simple and quick operation and save labor cost.

Minimum Order: 10000

Contact:
Phone:
Fax:
Email:
Mike Peng
86-013961495796
86-0519-86686323
Send Inquiry
Changzhou Sakawa Yoshi garden equipment
Jiaze town,Wujiang district
Changzhou 213000
China
3/20/19 11:10 GMT
PP material garden tree set cups and strap inner diameter 4.3cm ZCM-43

Tree protection support system: Designed to protect the foundation of the new plant and the law of vertical growth of trees,On this basis, the scientific design of the three components, Comparing with the traditional similar support method, it is more beautiful and tidy。Selection of profiles to refresh the new standards of similar technology,In line with the scientific, economic, energy saving, environmental protection and efficient development concept advocated by the modern society。 Product functions: The product system is made of sets of cups, bandages, wood pillar.The cup is made of injection of soft material made from synthetic resin series,Simple operation, only four steps to complete the installation,effective protection of the normal growth of seedlings,The two form a stable whole, which greatly saves the construction process and cost.The cup part of the product can be used again and again for a period of 3-5 years. At the same time, it is resistant to heat and cold, high temperature 120 ℃, low temperature -50℃. Product part: set cup--tree support holder It is made of update PP material. It is both heat-resisting and cold- resisting.nondiscoloring and nondeformation, strong and durable,can be used more times. Specification: It is divided into eight kinds by different inner diameter size and material as belows: A: hard plastic ZCM-65 inner diameter size: 65mm ZCM-53 inner diameter size:53mm ZCM-43 inner diameter size:43mm ZCM-38 inner diameter size:38mm B: soft plastic ZCM-65R inner diameter size: 65mm ZCM-53R inner diameter size:53mm ZCM-43R inner diameter size:43mm ZCM-38R inner diameter size:38mm Product part: bandage (strap) It is made of pp and nylon material. Tough and durable Specification : Model No: Z-100 : 100 centimeter bangage suitable for tree trunk under 22 centimeter. Model No:Z-80 : 80 centimeter bangage suitable for tree trunk under 22 centimeter. Model No:Z-50 : 50 centimeter bangage suitable for tree trunk under 12 centimeter. Install steps: The installation is simple, no need of other materials, only a few steps easy to complete the installation, reduce installation costs. 1.put the support wood into the cover cup, fix the screws (to prevent the loss of the support wood and firm after installation) 2.Put the necessary 3-4 pillars in the corresponding height. 3.After wearing a bandage, then fix cover cup position and adjust the tightness of the bandage 4.After fastening bandage,then insert the rest of bandage into the cover cup to complete the whole installation Application: Landscape engineering, support seedlings, anti - fall, and promote survival. Anti typhoon, transplant necessary Features: 1. Reasonable design, strong support. 2. Beautiful, uniform and tidy 3. Simple and quick operation and save labor cost.

Minimum Order: 10000

Contact:
Phone:
Fax:
Email:
Mike Peng
86-013961495796
86-0519-86686323
Send Inquiry
Changzhou Sakawa Yoshi garden equipment
Jiaze town,Wujiang district
Changzhou 213000
China
3/20/19 11:10 GMT
PP garden tree support tool of sets cup with inner diameter 5.3cm ZCM-53

Tree protection support system: Designed to protect the foundation of the new plant and the law of vertical growth of trees,On this basis, the scientific design of the three components, Comparing with the traditional similar support method, it is more beautiful and tidy。Selection of profiles to refresh the new standards of similar technology,In line with the scientific, economic, energy saving, environmental protection and efficient development concept advocated by the modern society。 Product functions: The product system is made of sets of cups, bandages, wood pillar.The cup is made of injection of soft material made from synthetic resin series,Simple operation, only four steps to complete the installation,effective protection of the normal growth of seedlings,The two form a stable whole, which greatly saves the construction process and cost.The cup part of the product can be used again and again for a period of 3-5 years. At the same time, it is resistant to heat and cold, high temperature 120 ℃, low temperature -50℃. Product part: set cup--tree support holder It is made of update PP material. It is both heat-resisting and cold- resisting.nondiscoloring and nondeformation, strong and durable,can be used more times. Specification: It is divided into eight kinds by different inner diameter size and material as belows: A: hard plastic ZCM-65 inner diameter size: 65mm ZCM-53 inner diameter size:53mm ZCM-43 inner diameter size:43mm ZCM-38 inner diameter size:38mm B: soft plastic ZCM-65R inner diameter size: 65mm ZCM-53R inner diameter size:53mm ZCM-43R inner diameter size:43mm ZCM-38R inner diameter size:38mm Product part: bandage (strap) It is made of pp and nylon material. Tough and durable Specification : Model No: Z-100 : 100 centimeter bangage suitable for tree trunk under 22 centimeter. Model No:Z-80 : 80 centimeter bangage suitable for tree trunk under 22 centimeter. Model No:Z-50 : 50 centimeter bangage suitable for tree trunk under 12 centimeter. Install steps: The installation is simple, no need of other materials, only a few steps easy to complete the installation, reduce installation costs. 1.put the support wood into the cover cup, fix the screws (to prevent the loss of the support wood and firm after installation) 2.Put the necessary 3-4 pillars in the corresponding height. 3.After wearing a bandage, then fix cover cup position and adjust the tightness of the bandage 4.After fastening bandage,then insert the rest of bandage into the cover cup to complete the whole installation Application: Landscape engineering, support seedlings, anti - fall, and promote survival. Anti typhoon, transplant necessary Features: 1. Reasonable design, strong support. 2. Beautiful, uniform and tidy 3. Simple and quick operation and save labor cost.

Minimum Order: 10000

Contact:
Phone:
Fax:
Email:
Mike Peng
86-013961495796
86-0519-86686323
Send Inquiry
Changzhou Sakawa Yoshi garden equipment
Jiaze town,Wujiang district
Changzhou 213000
China
3/20/19 11:10 GMT
PP tree support holder or fixer of sets cup inner diameter 6.5cm ZCM-65

Tree protection support system: Designed to protect the foundation of the new plant and the law of vertical growth of trees,On this basis, the scientific design of the three components, Comparing with the traditional similar support method, it is more beautiful and tidy。Selection of profiles to refresh the new standards of similar technology,In line with the scientific, economic, energy saving, environmental protection and efficient development concept advocated by the modern society。 Product functions: The product system is made of sets of cups, bandages, wood pillar.The cup is made of injection of soft material made from synthetic resin series,Simple operation, only four steps to complete the installation,effective protection of the normal growth of seedlings,The two form a stable whole, which greatly saves the construction process and cost.The cup part of the product can be used again and again for a period of 3-5 years. At the same time, it is resistant to heat and cold, high temperature 120 ℃, low temperature -50℃. Product part: set cup--tree support holder It is made of update PP material. It is both heat-resisting and cold- resisting.nondiscoloring and nondeformation, strong and durable,can be used more times. Specification: It is divided into eight kinds by different inner diameter size and material as belows: A: hard plastic ZCM-65 inner diameter size: 65mm ZCM-53 inner diameter size:53mm ZCM-43 inner diameter size:43mm ZCM-38 inner diameter size:38mm B: soft plastic ZCM-65R inner diameter size: 65mm ZCM-53R inner diameter size:53mm ZCM-43R inner diameter size:43mm ZCM-38R inner diameter size:38mm Product part: bandage (strap) It is made of pp and nylon material. Tough and durable Specification : Model No: Z-100 : 100 centimeter bangage suitable for tree trunk under 22 centimeter. Model No:Z-80 : 80 centimeter bangage suitable for tree trunk under 22 centimeter. Model No:Z-50 : 50 centimeter bangage suitable for tree trunk under 12 centimeter. Install steps: The installation is simple, no need of other materials, only a few steps easy to complete the installation, reduce installation costs. 1.put the support wood into the cover cup, fix the screws (to prevent the loss of the support wood and firm after installation) 2.Put the necessary 3-4 pillars in the corresponding height. 3.After wearing a bandage, then fix cover cup position and adjust the tightness of the bandage 4.After fastening bandage,then insert the rest of bandage into the cover cup to complete the whole installation Application: Landscape engineering, support seedlings, anti - fall, and promote survival. Anti typhoon, transplant necessary Features: 1. Reasonable design, strong support. 2. Beautiful, uniform and tidy 3. Simple and quick operation and save labor cost.

Minimum Order: 10000

Contact:
Phone:
Fax:
Email:
Mike Peng
86-013961495796
86-0519-86686323
Send Inquiry
Changzhou Sakawa Yoshi garden equipment
Jiaze town,Wujiang district
Changzhou 213000
China
3/20/19 11:10 GMT
soft plastic tree support fixer of sets cup 5.3cm ZCM-53R

Tree protection support system: Designed to protect the foundation of the new plant and the law of vertical growth of trees,On this basis, the scientific design of the three components, Comparing with the traditional similar support method, it is more beautiful and tidy。Selection of profiles to refresh the new standards of similar technology,In line with the scientific, economic, energy saving, environmental protection and efficient development concept advocated by the modern society。 Product functions: The product system is made of sets of cups, bandages, wood pillar.The cup is made of injection of soft material made from synthetic resin series,Simple operation, only four steps to complete the installation,effective protection of the normal growth of seedlings,The two form a stable whole, which greatly saves the construction process and cost.The cup part of the product can be used again and again for a period of 3-5 years. At the same time, it is resistant to heat and cold, high temperature 120 ℃, low temperature -50℃. Product part: set cup--tree support holder It is made of update PP material. It is both heat-resisting and cold- resisting.nondiscoloring and nondeformation, strong and durable,can be used more times. Specification: It is divided into eight kinds by different inner diameter size and material as belows: A: hard plastic ZCM-65 inner diameter size: 65mm ZCM-53 inner diameter size:53mm ZCM-43 inner diameter size:43mm ZCM-38 inner diameter size:38mm B: soft plastic ZCM-65R inner diameter size: 65mm ZCM-53R inner diameter size:53mm ZCM-43R inner diameter size:43mm ZCM-38R inner diameter size:38mm Product part: bandage (strap) It is made of pp and nylon material. Tough and durable Specification : Model No: Z-100 : 100 centimeter bangage suitable for tree trunk under 22 centimeter. Model No:Z-80 : 80 centimeter bangage suitable for tree trunk under 22 centimeter. Model No:Z-50 : 50 centimeter bangage suitable for tree trunk under 12 centimeter. Install steps: The installation is simple, no need of other materials, only a few steps easy to complete the installation, reduce installation costs. 1.put the support wood into the cover cup, fix the screws (to prevent the loss of the support wood and firm after installation) 2.Put the necessary 3-4 pillars in the corresponding height. 3.After wearing a bandage, then fix cover cup position and adjust the tightness of the bandage 4.After fastening bandage,then insert the rest of bandage into the cover cup to complete the whole installation Application: Landscape engineering, support seedlings, anti - fall, and promote survival. Anti typhoon, transplant necessary Features: 1. Reasonable design, strong support. 2. Beautiful, uniform and tidy 3. Simple and quick operation and save labor cost.

Minimum Order: 10000

Contact:
Phone:
Fax:
Email:
Mike Peng
86-013961495796
86-0519-86686323
Send Inquiry
Changzhou Sakawa Yoshi garden equipment
Jiaze town,Wujiang district
Changzhou 213000
China
3/20/19 9:15 GMT
4.3cm diameter soft plastic garden tree support sets cup ZCM-43R

Tree protection support system: Designed to protect the foundation of the new plant and the law of vertical growth of trees,On this basis, the scientific design of the three components, Comparing with the traditional similar support method, it is more beautiful and tidy。Selection of profiles to refresh the new standards of similar technology,In line with the scientific, economic, energy saving, environmental protection and efficient development concept advocated by the modern society。 Product functions: The product system is made of sets of cups, bandages, wood pillar.The cup is made of injection of soft material made from synthetic resin series,Simple operation, only four steps to complete the installation,effective protection of the normal growth of seedlings,The two form a stable whole, which greatly saves the construction process and cost.The cup part of the product can be used again and again for a period of 3-5 years. At the same time, it is resistant to heat and cold, high temperature 120 ℃, low temperature -50℃. Product part: set cup--tree support holder It is made of update PP material. It is both heat-resisting and cold- resisting.nondiscoloring and nondeformation, strong and durable,can be used more times. Specification: It is divided into eight kinds by different inner diameter size and material as belows: A: hard plastic ZCM-65 inner diameter size: 65mm ZCM-53 inner diameter size:53mm ZCM-43 inner diameter size:43mm ZCM-38 inner diameter size:38mm B: soft plastic ZCM-65R inner diameter size: 65mm ZCM-53R inner diameter size:53mm ZCM-43R inner diameter size:43mm ZCM-38R inner diameter size:38mm Product part: bandage (strap) It is made of pp and nylon material. Tough and durable Specification : Model No: Z-100 : 100 centimeter bangage suitable for tree trunk under 22 centimeter. Model No:Z-80 : 80 centimeter bangage suitable for tree trunk under 22 centimeter. Model No:Z-50 : 50 centimeter bangage suitable for tree trunk under 12 centimeter. Install steps: The installation is simple, no need of other materials, only a few steps easy to complete the installation, reduce installation costs. 1.put the support wood into the cover cup, fix the screws (to prevent the loss of the support wood and firm after installation) 2.Put the necessary 3-4 pillars in the corresponding height. 3.After wearing a bandage, then fix cover cup position and adjust the tightness of the bandage 4.After fastening bandage,then insert the rest of bandage into the cover cup to complete the whole installation Application: Landscape engineering, support seedlings, anti - fall, and promote survival. Anti typhoon, transplant necessary Features: 1. Reasonable design, strong support. 2. Beautiful, uniform and tidy 3. Simple and quick operation and save labor cost.

Minimum Order: 10000

Contact:
Phone:
Fax:
Email:
Mike Peng
86-013961495796
86-0519-86686323
Send Inquiry
Changzhou Sakawa Yoshi garden equipment
Jiaze town,Wujiang district
Changzhou 213000
China
3/18/19 2:45 GMT
live cat trap cage

Product:catching cat trap cage CA-8(collapsible) Specification: 31x11x13inch(can also be made as your size) Material: galvanized carbon steel wire. Ldeal for catching: Rabbit,Hare,Cat,Skunks,Raccoon,Ferrets, and similar sized animals

Minimum Order: 300

Contact:
Phone:
Fax:
Email:
Thomas
0086-15233779822
0086-317-8854878
Send Inquiry
Hebei Tianlida Hardware Product Co.ltd
Guangming Road Nanpi Hebei China
Cangzhou 061500
China
3/18/19 2:44 GMT
Mole trap

Hebei Tianlida Hardware Product Co.,Ltd is the specialized enterprise in manufacturing pest control products for many years,which is located in the west zone of ,Nanpi county ---the famous hardware/mould base in china. We mainly produce all kinds of precise stamping parts, injection moulding, high quality sheet-metal parts especially we have unique experience in Deep - processing of wire mesh and polishing of the stainless steel surface process/manufacturing technology stamping pulling(stretching) extending,welding, binding , Linear -Cutting. Our company is the specialized enterprise in manufacturing hardware and pest control products for many years, and now we are The Leader manufacturer of pest control products. Our main products: bird deterrents & repellent series products, snake control, snake holding, anti-bird series products, trap cage series products, mole control series, live animals trap cages and some other pest control hardware products. Such as bird spikes, bird netting, bird shock, bird wire, snake control, easy mole trap, solar mole repeller, Solar mouse repeller, and the solar bird repeller, tunnel mole trap, scissor moles, humane mouse trap, mole killer, mice killer, snap mousetrap, mouse bait station .plastic mousetrap & rat trap, catch all mousetrap, wind-up mousetrap, multi catch mouse trap, single door and double doors trap cages, bird shock parts, bird netting parts, easy mole trap and some ODM/OEM products . Our management Philosophy : Honesty comes first. Develop together .welcome warmly those friends ffrom both home and aboard to cooperate with us , to actualize our great plan .we are sure we will have a nice future.

Minimum Order: 2000

Contact:
Phone:
Fax:
Email:
Thomas
0086-15233779822
0086-317-8854878
Send Inquiry
Hebei Tianlida Hardware Product Co.ltd
Guangming Road Nanpi Hebei China
Cangzhou 061500
China
3/18/19 2:44 GMT
Snake tong

Snake tong Material: aluminum alloy Length:40" 52" 72" Hebei Tianlida Hardware Product Co.,Ltd is the specialized enterprise in manufacturing pest control products for many years,which is located in the west zone of ,Nanpi county ---the famous hardware/mould base in china. We mainly produce all kinds of precise stamping parts, injection moulding, high quality sheet-metal parts especially we have unique experience in Deep - processing of wire mesh and polishing of the stainless steel surface process/manufacturing technology stamping pulling(stretching) extending,welding, binding , Linear -Cutting. Our company is the specialized enterprise in manufacturing hardware and pest control products for many years, and now we are The Leader manufacturer of pest control products. Our main products: bird deterrents & repellent series products, snake control, snake holding, anti-bird series products, trap cage series products, mole control series, live animals trap cages and some other pest control hardware products. Such as bird spikes, bird netting, bird shock, bird wire, snake control, easy mole trap, solar mole repeller, Solar mouse repeller, and the solar bird repeller, tunnel mole trap, scissor moles, humane mouse trap, mole killer, mice killer, snap mousetrap, mouse bait station .plastic mousetrap & rat trap, catch all mousetrap, wind-up mousetrap, multi catch mouse trap, single door and double doors trap cages, bird shock parts, bird netting parts, easy mole trap and some ODM/OEM products .

Minimum Order: 200

Contact:
Phone:
Fax:
Email:
Thomas
0086-15233779822
0086-317-8854878
Send Inquiry
Hebei Tianlida Hardware Product Co.ltd
Guangming Road Nanpi Hebei China
Cangzhou 061500
China
3/18/19 2:44 GMT
stainless steel bird control spikes

Product:Stainless steel bird spike ST-4 Material: stainless steel 304(polish). Specification: 72spikes, length of spikes is 110mm, spike diameter is 1.3mm, base size 1000mmx20mmx0.3mm. Weight: 150g We can also make according to request.

Minimum Order: 2000

Contact:
Phone:
Fax:
Email:
Thomas
0086-15233779822
0086-317-8854878
Send Inquiry
Hebei Tianlida Hardware Product Co.ltd
Guangming Road Nanpi Hebei China
Cangzhou 061500
China
3/18/19 2:44 GMT
bird spikes

bird spikes Iterm code: BK-V4 Size:500mmlength and 40spikes Material: PC base and stainless steel spikes Packing: 100pcs/carton Min order:1000pcs.

Minimum Order: 1000

Contact:
Phone:
Fax:
Email:
Thomas
0086-15233779822
0086-317-8854878
Send Inquiry
Hebei Tianlida Hardware Product Co.ltd
Guangming Road Nanpi Hebei China
Cangzhou 061500
China


SOURCE: Import-Export Bulletin Board (http://www.imexbb.com/)
Result Page:   1   |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   10  |   11  |   Next >>

Post an Offer to Sell
Home - Offers to Buy - Business Opportunities - Company Profiles

© 1996-2019 IMEXBB.com. All rights reserved.

IMEXBB.com