Import-Export Bulletin Board Post an Offer to Sell

New here? Please subscribe
to post trade leads. It's FREE!

Machinery & Parts - Others


Home > Offers to Sell > Minerals & Metals > Machinery & Parts > Others

Browse leads by category:
    
    
    Others
 

Summary of 3/28/24 21:58 GMT:>> Show Compact View
8/3/23 3:53 GMT
4364917 Bucket Cylinder Seal Kit Fits EX200-5 Excavator

It should be based on the specific use conditions and requirements of the hydraulic cylinder, such as the load, working pressure, relative movement speed, and the level and change of ambient temperature. Choose hydraulic cylinder seals with suitable structure and material. It can minimize the thickness of the oil film between the seal and the sealing surface and reduce the leakage of the hydraulic seal. Precautions of 4364917 bucket tilt cylinder Seal kit Fits EX200-5 Excavator 1. It should be based on the specific use conditions and requirements of the hydraulic cylinder, such as the load, working pressure, relative movement speed, and the level and change of ambient temperature. Choose hydraulic cylinder seals with suitable structure and material. It can minimize the thickness of the oil film between the seal and the sealing surface and reduce the leakage of the hydraulic seal. 2. Due to reasons such as processing and assembly, there must be a suitable gap between the relative motion coupling surfaces-a sealing gap. 3. Ensure the dimensional accuracy, surface roughness, shape and position accuracy of hydraulic cylinder seals, sealing grooves and sealing surfaces. Avoid or reduce the damage of seals. Thereby reducing the leakage of the seal. 4. When installing the seal, in order to reduce the assembly resistance of the seal, lithium soap-based grease or hydraulic oil should be applied to the installation position to avoid plastic deformation and damage such as excessive stretching of the seal. Avoid or reduce the leakage of seals. 5. Enhance the awareness of pollution protection of hydraulic oil. Strengthen the supervision and detection of hydraulic oil pollution, and replace the hydraulic oil in time when it is polluted. Thereby reducing the leakage of the seal. 6. When storing the seals, store them in a dark place to avoid high temperature or direct sunlight. Poor storage and storage will accelerate the aging of the seals and cause leakage.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
sanping
020-32381760

Send Inquiry
Guangzhou Sanping Machinery Co., Ltd.
201-202,Jide Builiding,Zhonghaijing ,NO.1 Dashadi West,Huangpu District,Guangzhou
Guangzhou 510700
China
8/3/23 3:53 GMT
14512950 14589140 Arm Cylinder Seal Kit Fits EC360 Excavator

Accessories for volvo excavators: EC55B, EC55BP, EC60C, EC80D, EC140B, EC140BP, EW60C, EW145BP, EC140B, EC140BP, EC200B, EC210B, EC210BP, EC220D, EC240B, EC240BP, EC250D, EC290B, EC360B, EC360BP, EC380D, EC460B , EC460BP, EC480D, EC700B, EC700C, EC750B. Volvo loaders model: L35, L45B,. L90E, L105, L120E, L150E, L150G, L180E, L180G, L180GHL, L220E, L220G, L250G, 330E, L350F. We provide rotary lift seal kit, rotary lift hydraulic cylinder rebuild, rotary lift cylinder seal kit, etc. For more, contact us.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
sanping
020-32381760

Send Inquiry
Guangzhou Sanping Machinery Co., Ltd.
201-202,Jide Builiding,Zhonghaijing ,NO.1 Dashadi West,Huangpu District,Guangzhou
Guangzhou 510700
China
8/3/23 3:52 GMT
Arm Cylinder Seal Kit

Sanping Arm Cylinder Seal Kit Arm seal kit also know as arm cylinder seal kit.The seal kit introduce know is used on the arm hydraulic cylinder of excavator,Mainly used to prevent hydraulic oil leakage and ensure that the middle arm can be used normally. Why Choose Sanping Arm Cylinder Seal Kit? Versatility: china arm seal kit are available in a variety of sizes and shapes, allowing them to be used in a variety of applications. Cost: Arm cylinder seal kits are generally less expensive than other sealing solutions, making them a more affordable option. Maintenance: Arm cylinder seal kits are easy to maintain, increasing the life of the seal. Arm Cylinder Seal Kit FAQs How Does Arm Cylinder Seal Kit Work? Arm cylinder seal kits are composed of two main components: the seal itself and the seal housing. The seal is made from a rubber material and is usually shaped in an oval or circular shape. The seal housing is a metal cylinder that is attached to the arm or shaft of the device. When the arm is turned, the seal is compressed against the sides of the housing, creating a seal that prevents air, liquids, or other materials from entering or leaking out. The seal also prevents dirt, dust, and other particles from entering the device. What is a Cylinder Seal Kit? A cylinder seal kit is a set of seals that are used to seal the connection between the cylinder and the piston in an engine or other mechanical apparatus.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
sanping
020-32381760

Send Inquiry
Guangzhou Sanping Machinery Co., Ltd.
201-202,Jide Builiding,Zhonghaijing ,NO.1 Dashadi West,Huangpu District,Guangzhou
Guangzhou 510700
China
8/3/23 3:51 GMT
4649049 Boom Seal Kit Fits ZAX330-3 Excavator

Accessories for Hitachi excavators: EX60, EX60-2/3, EX60-5, EX100, EX100-2/3, EX100-5, EX120, EX120-2, EX120-5, EX150, EX150-5/160-5, EX200, EX200-2, EX200- 3, EX200-5/210-5, EX220, EX220-2/3, EX220-5, EX270, EX270-5, EX300, EX300-3, EX300-5, EX400, EX400-3/5, ZX60, ZX70, ZX120, ZX160, ZX160-3, ZX200, ZX200- 3/210-3, ZX230, ZX240-3, ZX270, ZX270-3, ZX330, ZX330-3/350-3/360-3, ZX450, ZX450-3/470-3, UH07-3, UH07-5/081, UH07-7/083(OLD), UH07-7/083(NEW). We provide lift cylinder seal kit, lift seal, seal kit lift cylinder, etc. For more about 4649049, contact us.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
sanping
020-32381760

Send Inquiry
Guangzhou Sanping Machinery Co., Ltd.
201-202,Jide Builiding,Zhonghaijing ,NO.1 Dashadi West,Huangpu District,Guangzhou
Guangzhou 510700
China
8/3/23 3:50 GMT
707-99-67120 Boom Seal Kit Fits PC400-5 Excavator

The 707-99-67120 seal kit boom cylinder is a replacement kit that is compatible with the PC400-5 Excavator model. This kit contains various seals that are designed to seal the boom cylinder of the excavator, preventing hydraulic fluid from leaking out of the cylinder. A boom seal kit is essential for maintaining the efficiency and safety of the excavator, as hydraulic fluid leakage can lead to reduced performance, increased maintenance costs, and safety hazards.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
sanping
020-32381760

Send Inquiry
Guangzhou Sanping Machinery Co., Ltd.
201-202,Jide Builiding,Zhonghaijing ,NO.1 Dashadi West,Huangpu District,Guangzhou
Guangzhou 510700
China
8/3/23 3:49 GMT
14589129 Boom Cylinder Seal Kit Fits Volvo EC210 Excavator

Cylinder hydraulic repair kit 14589129 EC210 BOOM is suitable for VOLVO 20 ton excavators commonly used on construction sites. VOLVO brand machines always pay attention to high quality, so the quality of the oil seals we match requires quality first, making high-quality products with the best cost performance.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
sanping
020-32381760

Send Inquiry
Guangzhou Sanping Machinery Co., Ltd.
201-202,Jide Builiding,Zhonghaijing ,NO.1 Dashadi West,Huangpu District,Guangzhou
Guangzhou 510700
China
8/3/23 3:48 GMT
707-99-46270 Boom Cylinder Seal Kit Fits Komastu PC200-6 Excavator

707-99-46270 Boom Cylinder Seal Kit Fits Komastu PC200-6 Excavator PC200-6 Repair kit/Seal kit is suitable use for 20- ton Komatsu excavator boom hydraulic cylinder. Complete parameters, stable performance, easy to replace, is a good companion for the cylinder. It's mainly including rod seal, buffer seal, piston seal, o-ring, wear rings, buffering ring, etc. Mainly for applications where the pressure alternates from one side of the seal to the other, such as pivots for rotating track rings, swivel joints, hose reels, and in machine tool hydraulics.)

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
sanping
020-32381760

Send Inquiry
Guangzhou Sanping Machinery Co., Ltd.
201-202,Jide Builiding,Zhonghaijing ,NO.1 Dashadi West,Huangpu District,Guangzhou
Guangzhou 510700
China
8/3/23 3:45 GMT
Custom Seal Kit

The seal kit manufacturer Sanping custom seal kits is one of the best partners in the construction machinery maintenance market. We use 1:1 real mechanical equipment for effective experimental detection, to ensure that each seal repair kit can effectively adapt to the work requirements of each hydraulic system and sealing system, and can provide customized services according to different equipment requirements, and effectively provide scientific and correct solutions for customers. How to Install a Seal Kit in a Hydraulic Cylinder? Different seals have different installation methods, common types: reciprocating motion seals and skeleton oil seals for rotation. The installation method of the skeleton oil seal for rotation: the first step, when taking the oil seal out of the warehouse, check whether there are dust and sand and other impurities on the surface of the oil seal and the lip, so as to avoid these substances from damaging the lip and shaft during the shaft movement, causing leakage. In the second step, for oil seals with more than two lips like TC, TA, TB, and TF, please fill the lip with grease, and for single-lip oil seals like SC, VC, and VB Apply grease to the end. The third step is to confirm that there is no foreign matter such as anti-rust oil or dust attached to the surface of the shaft and cavity. If there is any, please clean it. The fourth step is to confirm that there are no burrs on the surface of the shaft cavity and chamfers, so as to prevent these burrs from damaging the lip during installation. The fifth step is to assemble it into the cavity. It should be noted that the installation direction of the oil seal is that the sealing lip faces the sealing introduction side. The sixth step, when installing the oil seal, please use a special clamp to avoid the oil seal from tilting during installation. Installation method of hydraulic cylinder seals: 1. Receive a fixed number of oil seals. 2. From oil seal collection to assembly, it must be kept clean. 3. Before assembly, check the oil seal and measure whether the size of each part of the oil seal is consistent with the size of the shaft and cavity. Before installing the oil seal, first compare the size of the shaft diameter with the inner diameter of the oil seal, and they must be consistent. The inner size of the cavity should be suitable for the width of the outer diameter of the oil seal. Check whether the lip of the oil seal is damaged or deformed and whether the spring falls off or rusts. Prevent the oil seal from being placed flat during transportation, and being affected by external force extrusion and impact, which will damage its roundness. 4. Do a good job of machining inspection procedures before assembly. Measure whether the dimensions of the cavity and the shaft are correct. Especially inside chamfers. There must be no slope. The end face of the shaft and the cavity should be smooth and clean, the chamfer should be free of damage and burrs, and the assembly parts should be cleaned. There should be no burrs, sand, iron filings and other sundries at the shaft loading (chamfer) part, which will cause oil seal lip For irregular damage, it is recommended to use r-angle at the chamfering part. 5. In terms of operating skills, you can feel it with your hands to see if it is smooth and round. 6. Do not tear off the wrapping paper too early before the oil seal is installed to prevent debris from adhering to the surface of the oil seal and being brought into the work. 7. Before installation, an appropriate amount of lithium-based ester with molybdenum disulfide should be applied between the lips of the oil seal to prevent dry grinding of the lips and affect the interference of the lips when the shaft starts up instantaneously. ASAP, assemble. If the oil seal seat installed with the oil seal is not installed immediately, it is recommended to cover it with a cloth to prevent foreign matter from adhering to the oil seal. Hands or tools applied with lithium-based grease must be clean. 8. The oil seal should be installed flat, and there should be no tilting phenomenon. It is recommended to use hydraulic equipment or socket tools for installation. The pressure should not be too great, and the speed should be even and slow. 9. For the machine with the oil seal installed this time, mark it for easy tracking, and pay attention to the whole process. When the transition is installed on the stepped shaft, it is necessary to use a copper sheet to guide the transition or use a plastic tape to protect the transition, so as not to damage the oil seal. How to Select the Right o ring seal kit Size? When we choose seals, we must consider the following important factors: 1. Working pressure The pressure level and the length of the pressure cycle change have a great influence on the damage of the seal (such as extrusion). The higher the pressure, the greater the impact of other factors on the performance of the seal, such as temperature, speed, material of the seal, the gap between the piston and the cylinder, and the gap between the piston and the cylinder head. 2. Working temperature It is difficult to describe the maximum service temperature and the minimum service temperature of a sealing material because this is the result of a series of factors. For the working temperature of the piston and the piston rod are different, they should be selected differently. 3. Friction The friction between the seal and the sealing surface depends on many factors: surface roughness, surface characteristics, pressure, medium, temperature, seal material, seal type and movement speed. 4. Surface treatment Experience has shown that the characteristics of the surface of the cylinder piston and piston rod have a great influence on the life of the seal. Surface properties are often defined by the value of surface roughness Ra, which is the arithmetic mean of the absolute value of the surface shape away from the center line. However, these values cannot fully represent the influence of the surface condition on the seal, because even under the same roughness, different surface shape features can cause different degrees of seal wear on the seal.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
sanping
020-32381760

Send Inquiry
Guangzhou Sanping Machinery Co., Ltd.
201-202,Jide Builiding,Zhonghaijing ,NO.1 Dashadi West,Huangpu District,Guangzhou
Guangzhou 510700
China
7/10/23 3:02 GMT
Electric Motor Bearing

The 6308-2RS is a 40 mm ball bearing that can be used in many applications. 6308-2RS ball bearings have two contact rubber seals located on each side of the ball bearing. 6308 2RS bearing rincipal dimension Bearing No. 6308-Z/2Z/RZ/RS/2RS/2RZ I.D. 40mm O.D. 90mm Width 23mm Weight(Kg) 0.63mm Bore Type Straight Closure Type Two Contact Seals Snap Ring Included Without Snap Ring Internal Clearance C0 Maximum Operating Temperature 120℃ Dynamic Load Capacity 9149.72395743783 lb Static Load Capacity 5395.41461863656 lb Precision Rating ABEC 1 Bearing Material Steel Feature Super finished raceways Quiet operations, Low noise ISO standard interchangeable dimensions Electric Motor Quality (EMQ) Contact seal(s) offer superior lubricant retention and bearing protection from contaminants long life high temperature resistance of motor-bearing We also supply other bearing no.: The bearing numbers are as follow: 6204-2RS/ZV3  6205-2RS/ZV3  6206-2RS/ZV3  6306-2RS/ZV3  6308-2RS/ZV3  6309-2RS/ZV3  6311-2RS/ZV3  6312-2RS/ZV3  6313-2RS/ZV3   6314-2RS/ZV3  6406  6407  6408  6409  6412 6200 series and 6300 series used in motors with 3000 r/m, 6305 and 6400 series used in vibration motor.

Contact:
Phone:
Fax:
Email:
Zhixing Chen
86-0311-87784340

Send Inquiry
Hebei Nicer Technology Bearing Co., Ltd
No.98, Xiying Industry Area, North Youyi Street
Shijianzhuang 050072
China
7/10/23 3:02 GMT
Cylindrical roller bearing

Product Description NUP 210 rincipal dimension Bearing No. nup 210 I.D. 50mm O.D. 90mm Width 20mm Bore Type Cylindrical Number of Rows 1 Internal Clearance C0 Ring Separation O/R assembly separable I/R Operating Temperature Range Maximum of +300 °F Dynamic Load Capacity 16520 lbf Static Load Capacity 15620 lbf Precision Rating RBEC 1 (ISO Class Normal) Feature Super finished raceways Quiet operations, Low noise ISO standard interchangeable dimensions Electric Motor Quality (EMQ) Contact seal(s) offer superior lubricant retention and bearing protection from contaminants long life high temperature resistance of motor-bearing

Contact:
Phone:
Fax:
Email:
Zhixing Chen
86-0311-87784340

Send Inquiry
Hebei Nicer Technology Bearing Co., Ltd
No.98, Xiying Industry Area, North Youyi Street
Shijianzhuang 050072
China
7/10/23 3:02 GMT
Tapered Roller Bearing

Tapered Roller Bearings can bear one direction radial load and axial load, which are larger than radial ball bearing. Tapered Roller Bearings have widely application, especially in autombile. Automobile Bearing All moving parts of a automobile require bearings to function. Bearings improve the performance of automobiles, withstand heavy loads and reduce friction. Some of the major subsystems that use bearings are engines, transmissions, transmissions, wheels, steering, electric motors, pumps, etc. In addition, even windshield wipers, mirrors, doors and hood hinges require bearings to operate smoothly. Although there are dozens of ball bearings in the market, the following three types of bearings are commonly used in the automotive industry.

Contact:
Phone:
Fax:
Email:
Zhixing Chen
86-0311-87784340

Send Inquiry
Hebei Nicer Technology Bearing Co., Ltd
No.98, Xiying Industry Area, North Youyi Street
Shijianzhuang 050072
China
7/10/23 3:01 GMT
Overhead Conveyor Roller Turn Rollor

These bearings are designed for use in overhead conveyor systems. overhead conveyor bearings are constructed with fully machined raceways made of case- hardened steel. The Nicer bearings can be supplied with cages or full ball arrangements. Sealed and shielded overhead conveyor bearings are usually lubricated for life. Open types are usually not greased. Features of the overhead conveyor bearings series: Low cost and light strength allow the system to be designed to carry conveyor loads of up to 60 lbs. per foot. Fully enclosed track allows for application in a variety of contaminated environments. The flexibility of a design that can run straight up, straight down, or upside down saves space, allows for changes, and makes it practical to service production equipment in remote, difficult locations. Installation is simple and all track overhead conveyor bearings are pre- engineered, pre-assembled and ready for assembly. For a given load, the lightweight nature of overhead conveyor bearings requires less support steel. Heat treatment of all curves, wheels, chain side links and bracket pegs ensures long life operation of overhead conveyor bearings Roller Turn Roller are available with tappered roller bearing or full ball complement Both have triple labyrinth seals, Outer ring,inner ring and ball are made by bearing steel (AISI 52100) with hardness HRC58-62 and HRC 59-63. The sizes of Overhead Conveyor Roller Turn Rollor are as follows: For 3" Roller Turn, 4" Roller Turn and 6" Roller Turn

Contact:
Phone:
Fax:
Email:
Zhixing Chen
86-0311-87784340

Send Inquiry
Hebei Nicer Technology Bearing Co., Ltd
No.98, Xiying Industry Area, North Youyi Street
Shijianzhuang 050072
China
7/10/23 3:01 GMT
Deep Groove Ball Bearing

Type Deep groove ball bearings Bearing No. 6306-Z/2Z/RZ/RS/2RS/2RZ I.D. 30mm O.D. 72mm Width 19mm Weight(Kg) 0.350mm Bore Type Cylindrical Closure Type Open Row Type & Fill Slot 1 Snap Ring Included Without Snap Ring Internal Clearance C3 Dynamic Load Capacity 6654 lbf Static Load Capacity 3597 lbf Precision Rating ABEC 3 Finish/Coating Uncoated Feature Super finished raceways Quiet operations, Low noise ISO standard interchangeable dimensions Electric Motor Quality (EMQ) Contact seal(s) offer superior lubricant retention and bearing protection from contaminants long life high temperature resistance of motor-bearing Our Nicer bearings are designed optimally, which can bear more load than common radial ball bearing. Deep Groove Ball Bearings have most widely application, as well as in farm machinery. The numbers of Deep Groove Ball Bearing are as follows: 6204 6205 6206 6207 6208 6209 6210 6211 6212 6213 6214 6219 6220 6222 6224 6226 6228 6304 6305 6306 6307 6308 6309 6310 6311 6312 6313 6314 6315 6316 6317 6318 6319 6320 6322

Contact:
Phone:
Fax:
Email:
Zhixing Chen
86-0311-87784340

Send Inquiry
Hebei Nicer Technology Bearing Co., Ltd
No.98, Xiying Industry Area, North Youyi Street
Shijianzhuang 050072
China
7/10/23 3:01 GMT
Outer spherical bearing with pillow blocks

Outer spherical bearing with pillow blocks Product Description Outer Spherical Pillow Block Bearing is a type of bearing specifically designed for heavy-duty applications. It is a form of spherical roller bearing that incorporates the features of a self-aligning bearing in a single unit. Outer spherical pillow block bearings are well suited for applications that require high load capacities and perform in regions of frequent or wide misalignment. Manufactured from durable material, these bearings also provide corrosion resistant performance and long lasting service life. Outer spherical pillow block bearings are primarily used to support rotating shafts in industrial applications like conveyor belts, rollers, pumps, compressors and fans. They are available in various sizes, designs, and load ratings to meet various application requirements. These Outer spherical bearing with pillow blocks are often employed for applications with axial loads and radial loads such as cranes, steel milling, construction equipment, and mining. They are manufactured in different configurations, allowing them to be mounted on a variety of surfaces. Certain types of outer spherical pillow block bearings feature a double-seal design offering superior dust exclusion as well as higher bearing performance and durability. Outer spherical pillow block bearings are often used in situations where there is potential for high friction and vibrations, making them ideal for use in hostile environments including extreme temperatures and exposure to dust and liquids.

Contact:
Phone:
Fax:
Email:
Zhixing Chen
86-0311-87784340

Send Inquiry
Hebei Nicer Technology Bearing Co., Ltd
No.98, Xiying Industry Area, North Youyi Street
Shijianzhuang 050072
China
7/10/23 3:00 GMT
Overhead Conveyor trolley wheel

Overhead Conveyor trolley wheel Product Description 4" Trolley Wheel has triple labyrinth seals and is available with either retainer type or full ball complement. Outer ring, inner ring and ball are made by bearing steel(AISI 52100) with hardness HRC58-62 and HRC 59-63. Size of Trolley Wheel 3" Trolley Wheel, 4" Trolley Wheel, 6" Trolley Wheel, which are used in conveyor with die forging chain. Nicer Bearing focus on providing high quality 4" Trolley Wheel with wholesale price. We can also custom trolly wheels for customers demand. Contact us to know more information and free quotation.

Contact:
Phone:
Fax:
Email:
Zhixing Chen
86-0311-87784340

Send Inquiry
Hebei Nicer Technology Bearing Co., Ltd
No.98, Xiying Industry Area, North Youyi Street
Shijianzhuang 050072
China


SOURCE: Import-Export Bulletin Board (https://www.imexbb.com/)
Result Page:   1   |   2  |   Next >>

Post an Offer to Sell
Home - Offers to Buy - Business Opportunities - Company Profiles

© 1996-2024 IMEXBB.com. All rights reserved.

IMEXBB.com