Patchcords

Drop Cable Protect Fiber Heat Shrink Sleeves is a special polyolefin thermal-shrinkable sleeve, also called EVA. The outer layer is made of high quality soft crosslinked polyolefin material and inner hot-melt adhesive. The outer layer has the characteristics of insulation, corrosion prevention and wear resistance, while the inner layer has the advantages of low melting point, waterproof seal and high adhesion. Drop Cable Protect Fiber Heat Shrink Sleeves can Moisture resistant for environmental protection Clear sleeve make it easy to detect splice before shrinkage Easily use and avoid any damages to the optical fiber during installation Color optical fiber splice protector is very convenience for installation. The Drop Cable Protect Fiber Heat Shrink Sleeves is widely used in FTTH Drop cable joint connection protective. With big Inner Diameter of inner tube, we can put drop cable easily. communication optical fiber equipment such as optical fiber splice box, optical fiber terminal box, optical fiber distribution box, optical fiber transfer box, etc., when using Drop Cable Protect Fiber Heat Shrink Sleeves, it can not only protect the splice point but also increase the optical fiber machinery the strength reduces the damage of the optical fiber during the installation process without affecting the light guide characteristics of the optical fiber. If it is a transparent Drop Cable Protect Fiber Heat Shrink Sleeves, the splicing situation of the optical fiber can be seen clearly at a glance when the optical fiber is connected.

Minimum Order: 1000

LC UPC-LC UPC Simplex 3.0mm OM1 Multimode Fiber Optic Patch Cord is used as a jumper from the equipment to the optical fiber wiring link. It has a thick protective layer, which is generally used for the connection between optical transceiver and terminal box. It is applied in some fields such as optical fiber communication system, optical fiber access network, optical fiber data transmission and LAN. LC UPC-LC UPC Simplex 3.0mm OM1 Multimode Fiber Optic Patch Cord is a fiber optic cable capped at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch, or other telecommunication equipment. Having a thick layer of protection, it is used to connect the optical transmitter, receiver, and the terminal box.

Minimum Order: 100

FTTH Jumper Cable for Network SM Duplex Single Mode LC to LC Fiber Patch Cord is used as a jumper from the equipment to the optical fiber wiring link. It has a thick protective layer, which is generally used for the connection between optical transceiver and terminal box. It is applied in some fields such as optical fiber communication system, optical fiber access network, optical fiber data transmission and LAN. There are many kinds of optical fiber jumpers (also known as optical fiber connectors), that is, optical fiber connectors connected to optical modules, and they cannot be used with each other. SFP module is connected to LC optical fiber connector, while GBIC is connected to SC optical fiber connector. LC type optical fiber jumper: connector connecting SFP module, which is made of modular jack (RJ) latch mechanism with convenient operation. LC-LC Fiber Optic Cable body is made of PVC/ LSZH plastic materials, which is shiny, tough, environmental protection, not fade,not broken and not easily deformed. The inside optical cable is aramid, which is tough, tensile, non-toxic, fire retardant, core protection and low smoke. The connector is PBT plastic materials and fine copper, which is firm, durable, environmentalprotection, high temperature resistant, not fade, not broken and not easily deformed. 3.Application 1. Communication rooms 2. FTTH (Fiber to The Home) 3. LAN (Local Area Network) 4. FOS (fiber optic sensor) 5. Fiber Optic Communication System 6. Optical fiber connected and transmitted equipment

Minimum Order: 500

Main technical parameters : * Optical fibe , r external diameter: φ0.9mm, φ2.0mm, φ3.0m , m are option al, and PC, UPC, and APC a , re available, there are two kinds of sing le-mode and multi-mode. * Insertion loss: ,  ≤0.2dB * Echo Loss: PC≥40dB,UPC≥50dB , ,APC≥60dB * Exchangeability test: ≤0.2dB , * Vibration test: ≤0.1dB (10-60Hz, 1.5m , m amplitude) * Tensile strength test: ≤0 , .1dB (0- 15Hg tension, excluding 0.9mm opt , ical fiber) * High-temperature test: ≤0.2 , dB (+85 C, lasting 100 hours) * Low-tempe , rature test: ≤0.2dB (-40 C, lasting 100 h , ours) * Temperature cycling test:≤0.2dB ( , -40 ~85 C, after 5 cycles) * Humidity te , st: ≤0.2dB (+25℃~+65℃, relative humidity ,  93%, 100 hours  later) * Commonly use , d connectors: SC (large head)/LC (small head , /FC (spiral  port)/ST (card port) Scope

Minimum Order: 100