Power Cables

Aluminum Alloy Conductor Cable Product Description Since the early 1900s, aluminum and aluminum alloy conductor materials have been used by electrical utility companies for the transmission of electrical power within power grids across the country. In fact, over the years, aluminum has largely displaced copper conductors for these functions and has become the standard material for use in power transmission and distribution. If you’ve ever wondered why there’s no copper in the air, it’s because aluminum is the superior choice in every way. For starters, aluminum features twice the ampacity per pound as copper. In addition, it’s lighter, more flexible, and more corrosion-resistant. And MD Aluminum Alloy Conductor Cable much more cost- effective. As an example, if you’re an electron going all the way from say, for long distance power transmission, on the grid – you’re going to use the aluminum power highway. Thanks to a specially engineered aluminum alloy, Mingda feeder and service entrance cables now make it possible for commercial and residential users to enjoy the same reliability and economic advantages as power utilities. Aluminum Alloy Cable for Building 50% lighter than copper per pound 25% more flexible than copper easier and quicker to install similar conduit fill as copper for amps delivered

PVC Insulated Control Cable Product Description Control Cable is suitable for use in distribution equipment,instrumentation connection and control system at rated voltage 450/750V or less,The control cable can be made as flame retardant when customer required. Laying Temperature: during laying environment temperature shall not be less than 0℃,the cable should be preheated. Operating Temperature: max permissible continuous operating temperature of conductor shall not exceed 70℃. Bending Radius:16D for armored cable,8D for unarmored cable. D=actual outer diameter of cable ( mm ) Standard:GB9330-88 or other standards required by customers.The requirement for flame retardant property is according to IEC 60332-3,category B and C. Packing:Steel/wooden reel,wooden reel or steel reel. Description and Application Range of Cable Description Application Range Copper conductor/ PVC insulated/ PVC sheathed control cable For fixed laying indoors, in cable trench or conduit. Copper conductor/ PVC insulated/copper tape screened/ PVC sheathed control cable For fixed laying indoors,in cable trench or conduit when screen is required. Copper conductor/ PVC insulated/copper wire braiding screened/ PVC sheathed control cable Copper conductor/ PVC insulated/steel tape armored/ PVC sheathed control cable For fixed laying indoors,in cable trench, conduit or directly buried,the cable is able to bear larger mechanical force. Copper conductor/ PVC insulated/steel wire armored/ PVC sheathed control cable For fixed laying indoors,in cable trench, conduit or well.The cable is able to bear larger pulling force. Copper conductor/ PVC insulated/ PVC sheathed flexible control cable For fixed laying indoors when flexibility is required in moving. Copper conductor/ PVC insulated/copper wire braiding screened/ PVC sheathed control cable For fixed laying indoors when flexibility and screen are required in moving

BS Standard Cable Product Description Single core cables with solid or stranded copper conductors, PVC insulated, rated 450/750V conforming to SASO:55 specification Construction: Conductor Pla , in annealed circular copper conforming to IE , C:228, class 1 and 2 ( also available in aluminum conductors sizes 16 to 630 mm2). Insulation PVC type 5 to BS:6746  , rated 85°C, (PVC type 1 to BS:6746 rated  , 70 °C also available) Application: Typical applica , tions include building wiring, equipment wiri , ng, switching and distribution installations in conduits above or under plaster Features: Insulation adheres tig , htly to conductors yet strips easily, leaving conductor clean. PVC insulation has good electrical properties. Dimensions and Weights Conduct , or Insulation Packaging Cross sectional area Nominal Minimum number of wires Thickness Nominal Overall diameter Approx Net weight Approx B-Box, S-Spool C-Coil, D-Drum m m2   m m m m kg/km m 1.5 re 1 0.7 3.0 19 50/100 B/S 1.5 rm 7 0.7 3.2 19 50/100 B/S 2.5 re 1 0.8 3.6 30 50/100 B/S 2.5 rm 7 0.8 3.8 31 50/100 B/S 4 re 1 0.8 4.1 47 50/100 B/S 4 rm 7 0.8 4.3 48 50/100 B/S 6 re 1 0.8 4.6 66 50/100 B/S 6 rm 7 0.8 4.9 67 50/100 B/S 10 re 1 1.0 5.9 110 50/100 C 10 rm 7 1.0 6.3 113 50/100 C

8000 Series Aluminium Alloy Conductor SER Service Entrance Cable Product Description 8000 series aluminium alloy con , ductor is insulated with black XLPE. The insulated conductors  are cabled together with AL-alloy concentric neutral and fiberglass reinforced polyester tape binder, and oversheathed by grey sunlight resistant PVC. Construction: The stranded compacted 8000 series aluminium alloy conductor is insulated with black XLPE. The insulated conductors are cabled together with AL-alloy concentric neutral and fiberglass reinforced polyester tape binder, and oversheathed by grey sunlight resistant PVC. Application: Mainly used to convey power from the Service drop to the meter base to the distribution board. SEU can also be used in certain branch circuits as permitted by 1999 NEC. It is used in wet or dry locations. Rated Voltage：600V. Operating Temperature: Max permissible continuous operating temperature of conductor shall not exceed 90℃. Standard: UL 44 and UL 854,Federal Specification J-C-30B or other standards required by customers.

Armor Mining Trailing Cable Insulation Corrosion Resistant Product Description: FeiChun™ Mining Trailing Cables Our FeiChun™ Mining Trailing Cables have been expertly crafted to offer superior performance in the challenging environments of mining operations. With a strong focus on durability, flexibility, and safety, these cables are the reliable choice for powering your mobile mining equipment. Key Features: Durable Construction: Built to withstand the rigors of mining activities, these cables feature a rugged design that resists abrasion, impact, and mechanical stresses. Versatile Voltage Options: Available in a range of voltage options to meet the diverse power requirements of various mining equipment, offering flexibility in application. Flexible Mobility: Engineered for high flexibility, these cables adapt seamlessly to the dynamic movements and bending commonly associated with mobile mining equipment. High-Temperature Resilience: Designed to withstand extreme temperatures, ensuring reliable performance in both hot and cold mining environments. Robust Insulation: Utilizing high-quality insulation materials, these cables provide resistance against abrasion, chemicals, and environmental factors commonly found in mining operations. Mechanical Protection: Choose from robust armor options, such as steel wire or tape, enhancing the cables' mechanical protection for prolonged durability. Flame Retardant: Meets flame retardancy standards to enhance safety, minimizing the spread of fire in the demanding conditions of mining environments. Corrosion Resistance: Crafted with corrosion-resistant materials, ensuring longevity and reliability even in corrosive mining environments. Optimized Weight: Balances weight for easy handling and installation without compromising the cables' durability and robustness. EMI Shielding: Incorporates features to mitigate electromagnetic interference, maintaining signal integrity in sensitive electronic mining equipment. Waterproof Design: Exhibits water-resistant properties, making it suitable for wet or submerged mining conditions without compromising electrical performance. Low Voltage Drop: Minimizes voltage drop, ensuring efficient power transmission over extended distances in mining operations. FeiChun™ Mining Trailing Cables are the optimal choice for powering your mining equipment, providing reliability, safety, and longevity in the most demanding mining environments. Choose excellence; choose FeiChun™ for your mining power needs.

Detailed Product Description High Light: Aluminum 120mm 4 Core Cable, ASTM Low Voltage Power Cable, PVC 120mm 4 Core Cable Aluminum Core Low Voltage Power Cable ASTM PVC 120mm 4 Core Cable 1kV Application This product is suitable for power lines with rated voltage of 0.6 / 1kV and below, for power transmission, suitable for laying in hotels, stations, airports, high-rise buildings, chemical industry, petroleum platform, power station, subway, tunnel and other fixed laying places. Application Performance The long-term allowable operating temperature of the cable shall not exceed 70℃, and the short-time working temperature shall not be over 130℃. The ambient temperature of the installation should not be lower than 0℃. Minimum bending radius during cable installation: single-core cable not exceeding 20D (D is cable diameter), multi-core cable not exceeding 15D (D is cable diameter) Cable Construction Conductor adopts compact shaped or compact circular structure.

0.6/1 (1.2) Kv Low Voltage unarmoured power cable Copper/Aluminum Unarmored Cable Product Description 0.6/1 (1.2) Kv Low Voltage 5*50mm2 5*70mm2 5*95mm2 5*120mm2 Cu (AL) /PVC/PVC Copper/Aluminum Unarmored Power Cable CONDUCTOR MATERIALS : Copper or Aluminium ,round or sector shaped, stranded wire (Class2) conform to BS EN / IEC 60228 ;For smaller sizes, solid wire( Class 1 ) to BS EN / IEC 60228 INSULATION MATERIALS : PVC(Polyvinyl Chloride) ,PVC Insulation material and thickness shall be as per IEC 60502-1 and BS 6346 Insulation Core Color Indentification: *1Core: Brown or Blue *2Core :Brown-Blue *3Core :Brown-Blue-Grey *4Core :Brown-Blue-Grey-Black *5Core :Brown-Blue-Grey-Black-Yellow&Green BEDDING: Extruded bedding compound PVC(Polyvinyl Chloride) ARMOURED: Aluminum(single core)/Galvanized Steel Wires applied helically over the bedding as per IEC SHEATH: Extruded PVC (Polyvinyl Chloride) to conform conform to IEC 60502-1 Color-black other colours to special order TECHNICAL CHARACTRISITICS: * Rated voltage U0/U : 0.6/1kV. *Temperature Rang -25ºC to + 70ºC *Bending radius: Circular conductor =6D & Shaped Conductor=8D *Mechanical impact :Very good *Fire Performance:the flame test requirements of IEC 60332-3-22, IEC 60332- 3-23 and IEC 60332-3-24, *Flexibilty:Rigid *Low smoke emissions :BS7622 *Halogen free:BS EN50267-2-1 &BS EN50267-2-3 APPLICATION: SWA Armoured Cables are used for power networks supply ,undergrand,outdoor and indoor applications and for use in cable ducting. Suitable for use in power distribution lines with rated voltage 0.6/1KV low voltage installation system . For laying in shaft, water underground and large diference of level, able to bear external mechanical pressure and moderate pulling force.

Copper Core PVC Insulated Power Cable Sheathed Electric 0.6 1kv Application This product is suitable for power lines with rated voltage of 0.6 / 1kV and below, for power transmission, suitable for laying in hotels, stations, airports, high-rise buildings, chemical industry, petroleum platform, power station, subway, tunnel and other fixed laying places. Application Performance The long-term allowable operating temperature of the cable shall not exceed 70℃, and the short-time working temperature shall not be over 130℃. The ambient temperature of the installation should not be lower than 0℃. Minimum bending radius during cable installation: single-core cable not exceeding 20D (D is cable diameter), multi-core cable not exceeding 15D (D is cable diameter) Cable Construction Conductor adopts compact shaped or compact circular structure. 3.2 70℃ PVC insulation material is used for insulation, and the insulation thickness is shown in Table 1.

3.7 kw home charger tethered wall box is suitable for all commercial charging needs. It delivers all the safety and smart charging features you need to make charging easy, reliable, and cost-effective for your customers, tenants, and employees. It's built for long-time service, waterproof, and designed to work at -30 to 55 °C ambient temperature, never fearing freezing or the scorching heat. Customers can customize some features including the color, logo, functions, casing, etc. Highlight Of 3.7KW Charger Tethered Wallbox Must be fixed against the wall and is suitable for indoor and outdoor spaces. Feature: compact design, easy to use, durable and beautiful, safe and reliable. For more information about types of protective devices in electrical installations, please feel free to contact us!

Minimum Order: 1 bags

Our 3.7KW ac ev chargers Socket Wallbox is a compact, efficient EV charging station for home or small business use. It offers universal compatibility, advanced safety features, and reliable operation for electric vehicle charging. Highlight Of 3.7KW AC EV Charger Socket Wallbox Fast Charging: The 3.7KW ac charging ev Socket Wallbox provides rapid charging capabilities, allowing you to charge your electric vehicle quickly and conveniently. Wallbox Design: Designed to be mounted on the wall, this charger socket saves space and provides a neat and organized charging solution for your electric vehicle. Safety Features: The ac electric vehicle charger socket is equipped with multiple safety features such as overcurrent protection, short-circuit protection, and over-temperature protection to ensure safe and reliable charging. Compatibility: The ac charging for electric vehicles socket is compatible with a wide range of electric vehicles, making it versatile and suitable for various EV models. User-Friendly: With its user-friendly interface, the charger socket is easy to operate. It may include features like LED indicators to display the charging status and a user-friendly interface for adjusting charging settings. For more information about electrical overload protection devices and ac ev charger specifications, please feel free to contact us!

Minimum Order: 1 bags

A DC MCCB (Direct Current Molded-Case Circuit Breaker) is essential in providing protection against electrical hazards in DC systems. Compared to traditional fuses, they offer reduced maintenance costs, increased safety, and higher breaking capacities. DC MCCBs come in two main types: thermal magnetic and electronic trip, and should be properly selected based on system requirements. By regularly inspecting and testing MCCBs, proper functioning and protection is ensured. DC MCCBs have a wide range of applications, including renewable energy systems and industrial machinery. Maintenance and Care Guidelines for Ensuring Optimal Performance of 2 Phase DC MCCB 1 Regular Inspection Perform regular inspections of the MCCB to ensure optimal performance, including visual and functional checks of contacts, overloads and other key components. 2 Testing Perform testing procedures regularly to ensure that the MCCB is functioning optimally and within its rated capacity. 3 Cleanliness Keep the MCCB clean and free of dust or other debris and ensure that ventilation openings are not obstructed to ensure optimal heat dissipation. We provide 2 phase 20 amp breaker, two phase circuit breaker, double phase breaker, circuit breaker phase 2, 2 phase sub panel, two phase breaker, circuit breaker 2 phase, 2 phase breaker panel, etc. For more information about electrical overload protection devices, please feel free to contact us!

Minimum Order: 1 bags

A two phase mcb is a miniature circuit breaker that ensures safe and reliable operation of electrical systems using DC power sources. The two-pole configuration provides protection against overloads, short circuits, and other faults within the system. The advanced electronics and high-speed switching in 2 phase DC MCBs improve the efficiency of the electrical circuit and reduce energy consumption. These circuit breakers are commonly used in small electronic devices and automotive systems. The modular design of 2 phase DC MCBs makes maintenance and component replacement convenient. In addition, they provide cost savings on maintenance, reduce downtime, and protect against potential hazards, ensuring efficient operations of electrical systems. Working Principle and Functions of 2 Phase DC MCB 1 Working Principle A trip mechanism is used in the 2 phase DC MCB's operating system to trip the circuit when the current flow exceeds a certain threshold. By doing this, harm to the machinery and the circuit itself is avoided. 2 Overload Protection A 2 phase DC MCB's main job is to safeguard the electrical system against an excessive current flow. It has cutting-edge electronics that enable high-speed switching, which effectively and swiftly breaks the circuit and protects the apparatus. 3 Short-Circuit Protection The use of a 2 phase DC MCB in an electrical system provides effective short- circuit protection. The circuit breaker automatically cuts off the circuit when an excess current flows through it, thus preventing damage to the equipment and the system as a whole. For more information about electronic circuit protection devices, please feel free to contact us!

Minimum Order: 1 bags

Keep your electric vehicle's battery powered with this Religare type 2 to type 2 cable 22kw charging cable from Religare Electric. It's suitable to use for the AC charging of electric vehicles from all manufacturers. As it's portable, you can conveniently keep it in your car to use when you need it. The type 2 22kw cable has a charging power of up to 22kW to ensure your battery is fully charged. With up to 10 thousand insertion and withdrawal cycles, it's a long-lasting option. Flexibility comes courtesy of a large bending radius of 255mm. With a cable length of 5 meters, there's no need for you to locate your vehicle directly next to a power outlet. Plug caps protect the unit's connectors when it's not in use, so you can safely use them in contaminated environments without loss of performance. Highlight Of ev charger type 2 22kw Charging Cable Made of environmental TPI material. Had passed CE certification. Make your car fully charged within one hour. Multiple choice for specialized color. For more information about protective device for lighting circuit, please feel free to contact us!

Minimum Order: 1 bags

Our 22kw type 2 charger Tethered Cable is a high-powered charging solution for electric vehicles. It supports a rapid, efficient charging process and is equipped with a fixed Type 2 connector for superior compatibility with most modern EVs. Its robust design ensures durability and safety during usage. Highlight Of 22KW Type 2 EV Charging Tethered Cable High Power Capacity: The 22kw ev charging cable supports a high power output of 22 kilowatts, enabling fast and efficient charging for electric vehicles. Type 2 Connector: Equipped with a Type 2 connector, this cable offers universal compatibility with a wide range of electric vehicles. Tethered Design: The cable comes with a built-in connector, eliminating the need for separate adapters or additional cables, providing a convenient and hassle-free charging experience. Weather Resistant: Designed to withstand various weather conditions, the cable is durable and suitable for both indoor and outdoor EV charging installations. Safety Features: The cable incorporates safety features such as overcurrent protection and fault detection, ensuring secure and reliable charging operations for electric vehicles. For more information about protective devices for electrical equipment, please feel free to contact us!

Minimum Order: 1 bags