Telecom Equipment & Accessories

Products Description 1. Overview * HUR3103XR is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides different services access. * HUR3103XR is based on mature and stable, cost-effective XPON technology. * HUR3103XR adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X. 2. Functional Feature * Support EPON/GPON mode and switch mode automatically * Support Route mode for PPPoE/IPoE/Static IP and Bridge mode * Support IPv4 and IPv6 Dual mode * Support 4G WIFI and 2*2 MIMO * Support CATV interface for Video Service and remote control by Major OLT * Support LAN IP and DHCP Server configuration * Support Port Mapping and Loop-Detect * Support Firewall function and ACL function * Support IGMP Snooping/Proxy multicast feature * Support TR069 remote configuration and maintenance * Specialized design for system breakdown prevention to maintain stable system 3.Specification Technical item Details PON Interface 1 GPON BOB （Class B+/Class C+） Receiving sensitivity: ≤-27dBm/≤-29dBm Transmitting optical power: +0.5~+5dBm/+2~+7dBm Transmission distance: 20KM Wavelength: TX: 1310nm, RX: 1490nm Optical Interface SC/APC Connector Design Scheme RTL9603C+RTL8192FR BOB(i7525BN) Chip Spec CPU 950MHz,DDR2 128MB Flash: SPI Nor Flash 16MB LAN Interface 1 x 10/100/1000Mbps(GE) and 3 x 10/100Mbps(FE) auto adaptive Ethernet interfaces. Full/Half, RJ45 connector Wireless Compliant with IEEE802.11b/g/n, Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps, 2T2R,2 external antenna 5dBi, Support: Multiple SSID Channel: Auto Modulation type: DSSS, CCK and OFDM Encoding scheme: BPSK, QPSK, 16QAM and 64QAM CATV Interface RF, WDM, optical power : +2~-15dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: 78dBuV AGC range: -13~+1dBm MER: ≥32dB@-15dBm LED 11 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN4、 Worn、 Normal(CATV) Push-Button 3,For Function of Reset, WLAN, WPS Operating Condition Temperature: 0℃~+50℃ Humidity: 10%～90%（non-condensing） Storing Condition Temperature: -30℃~+60℃ Humidity: 10%~90%（non-condensing） Power Supply: DC 12V/1A Power Consumption: ≤6W Dimension: 180mm×107mm×28mm（L×W×H） Net Weight: 0.2Kg

Minimum Order: 1 bags

1. Overview * HUR3104XR is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides different services access. * HUR3104XR is based on mature and stable, cost-effective XPON technology. * HUR3104XR adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X 2.Functional Feature * Support EPON/GPON mode and switch mode automatically * Support Route mode for PPPoE/IPoE/Static IP and Bridge mode * Support IPv4and IPv6 Dual mode * Support 4G WIFIand 2*2 MIMO * Support LAN IP and DHCP Server configuration * Support Port Mappingand Loop-Detect * Support Firewall function andACL function * Support IGMP Snooping/Proxy multicast feature * Support TR069 remote configuration and maintenance * Specialized design for system breakdown prevention to maintain stable system 3.Hardware Specificaion Technical item Details PON Interface 1 GPON BOB （Class B+/Class C+） Receiving sensitivity: ≤-27dBm/≤-29dBm Transmitting optical power: +0.5~+5dBm/+2~+7dBm Transmission distance: 20KM Wavelength: TX: 1310nm, RX: 1490nm Optical Interface SC/UPC Connector Design Scheme RTL9603C+RTL8192FR BOB(i7525BN) Chip Spec: CPU 950MHz,DDR2 128MB Flash: SPI Nor Flash 16MB LAN Interface 1 x 10/100/1000Mbps(GE) and 3 x 10/100Mbps(FE) auto adaptive Ethernet interfaces. Full/Half, RJ45 connector Wireless Compliant with IEEE802.11b/g/n, Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps, 2T2R,2 external antenna 5dBi, Support: multiple SSID Channel: Auto Modulation type: DSSS, CCK and OFDM Encoding scheme: BPSK, QPSK, 16QAM and 64QAM LED 9 LED, For Status of WIFI,WPS,PWR,LOS,PON,LAN1~LAN4 Push-Button 3,For Function of Reset,WLAN,WPS Operating Condition Temperature: 0℃~+50℃ Humidity: 10%~90%(non-condensing) Storing Condition Temperature: -30℃~+60℃ Humidity: 10%~90%(non-condensing) Power Supply: DC 12V/1A Power Consumption: ≤6W Dimension: 180mm×107mm×28mm(L×W×H) Net Weight: 0.2Kg

Minimum Order: 1 bags

Product Description 1. Overview * HUR3107XR is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides different services access. * HUR3107XR is based on mature and stable, cost-effective XPON technology. * HUR3107XR adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X2. Functional 2.Feature * Support EPON/GPON mode and switch mode automatically * Support Route mode for PPPoE/IPoE/Static IP and Bridge mode * Support IPv4 and IPv6 Dual mode * Support 4G WIFI and 2*2 MIMO * Support CATV interface for Video Service and remote control by Major OLT * Support LAN IP and DHCP Server configuration * Support Port Mapping and Loop-Detect * Support Firewall function and ACL function * Support IGMP Snooping/Proxy multicast feature * Support TR069 remote configuration and maintenance * Specialized design for system breakdown prevention to maintain stable system 3. Hardware Specification Technical item Details PON Interface 1 GPON BOB （Class B+/Class C+） Receiving sensitivity:≤-27dBm/≤-29dBm Transmitting optical power: +0.5~+5dBm/+2~+7dBm Transmission distance: 20KM Wavelength: TX: 1310nm, RX: 1490nm Optical Interface SC/APC Connector Design Scheme RTL9603C+RTL8192FR BOB(i7525BN) Chip Spec: CPU 950MHz,DDR2 128MB Flash: SPI Nor Flash 16MB LAN Interface: 1 x 10/100/1000Mbps(GE) and 1 x 10/100Mbps(FE) auto adaptive Ethernet interfaces. Full/Half, RJ45 connector Wireless Compliant with IEEE802.11b/g/n, Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps, 2T2R,2 external antenna 5dBi, Support: Multiple SSID Channel: Auto Modulation type: DSSS, CCK and OFDM Encoding scheme: BPSK, QPSK, 16QAM and 64QAM CATV Interface RF, WDM, optical power : +2~-15dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: 78dBuV AGC range: -13~+1dBm MER: ≥32dB@-15dBm LED: 9 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN2、 Worn、 Normal(CATV) Push-Button 3,For Function of Reset, WLAN, WPS Operating Condition Temperature: 0℃~+50℃ Humidity: 10%～90%（non-condensing） Storing Condition Temperature: -30℃~+60℃ Humidity: 10%~90%（non-condensing） Power Supply: DC 12V/1A Power Consumption: ≤6W Dimension: 180mm×107mm×28mm（L×W×H） Net Weight: 0.2Kg

Minimum Order: 1 bags

1. Overview * HUR2202XR is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides different services access. * HUR2202XR is based on mature and stable, cost-effective XPON technology. * HUR2202XR adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X. 2. Functional Feature * Support EPON/GPON mode and switch mode automatically * Support Route mode for PPPoE/IPoE/Static IP and Bridge mode * Support IPv4 and IPv6 Dual mode * Support 4G WIFI 2*2 MIMO * Support LAN IP and DHCP Server configuration * Support Port Mapping and Loop-Detect * Support Firewall function and ACL function * Support IGMP Snooping/Proxy multicast feature * Support TR069 remote configuration and maintenance * Specialized design for system breakdown prevention to maintain stable system. 3. Hardware Specification Technical item Details PON Interface 1 GPON BOB （Class B+/Class C+） Receiving sensitivity: ≤-27dBm/≤-29dBm Transmitting optical power: +0.5~+5dBm/+2~+7dBm Transmission distance: 20KM Wavelength: TX: 1310nm, RX: 1490nm Optical Interface: SC/UPC Connector Design Scheme RTL9602C+RTL8192FR+Si32192 BOB(RTL8290B) Chip Spec: CPU 625MHz,DDR2 64MB Flash: SPI Nor Flash 16MB LAN Interface 1 x 10/100/1000Mbps(GE) and 1 x 10/100Mbps(FE) auto adaptive Ethernet interfaces. Full/Half, RJ45 connector Wireless Compliant with IEEE802.11b/g/n, Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps, 2T2R,2 external antenna 5dBi, Support: Multiple SSID Channel: Auto Modulation type: DSSS, CCK and OFDM Encoding scheme: BPSK, QPSK, 16QAM and 64QAM LED: 7 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN2 Push-B , utton 2, For Function of Reset, WPS Operating Condition Temperature: 0℃~+50℃ Humidity: 10%～90%（non-condensing） Storing Condition Temperature: -30℃~+60℃ Humidity: 10%~90%（non-condensing） Power Supply: DC 12V/1A Power Consumption: ≤6W Dimension: 180mm×107mm×28mm（L×W×H） Net Weight: 0.15Kg

Minimum Order: 1 bags

Optical Fiber Patch Cord Product Name: Communication test equipment fiber optic patch cord FC to LC single mode type Optical Fiber Patch Cord Description : product structure Core: high refractive index, used to transmit light. Cladding: The refractive index is low, and it forms a total reflection condition with the core. Jacket: High strength, can withstand large impacts, protect optical fiber. The core and the cladding together form a dielectric optical waveguide, which forms the conduction and restriction of optical signals and realizes the transmission of light. The core and the cladding together are called bare optical fibers. According to different transmission media, optical fiber jumpers can be divided into common single-mode and multi-mode jumpers of silicon-based optical fiber, and other optical fiber jumpers with plastic as transmission media; according to the connector structure, they can be divided into FC jumper, SC jumper, St jumper, LC jumper, MTRJ jumper, MPO jumper, Mu jumper, SMA jumper, FDDI jumper, library E2000 The appearance of the standard test line of the instrument is similar to that of an ordinary optical fiber jumper, but the requirements are much higher than the industry standards. Simplex will have two connectors totally, duplex will have four connectors, each side will have two connectors. Regarding the connector structure, It has FC, SC, ST, LC, MTRJ, MPO, MU, SMA 905/906, E2000, DIN4, D4, and so on. The fiber count also can be simplex patch cord, duplex patch cord, 4 core patch cord, 6 core patch cord, 8 core patch cord, 12 core patch cord, 24 core patch cord, 48 core patch cord, 96 core patch cord, and so on. Optical Fiber Patch Cord Typical Usages FTTA,FTTH Application 3G, 4G, 5G Base Station Horizontal and Vertical Cabling BBU,RRU,RRH,LTE Optical Fiber Patch Cord Technical Parameter products name Communication test equipment fiber optic patch cord FC to LC single mode type mode type single mode cable count simplex core type G657A2 cable color yellow patch cord length ( can be customized according to your request ) insertion loss ≤ 0.1dB return loss APC≥60 dB wavelength 1310/15500nm core type 9/125um ferrule material Ceramic operating temperature -40~ +85℃ cable print standard print ( can be customized) OEM/ODM acceptable warranty 3 years after delivery Delivery time 5-15 working days ( according to your quantity ) Optical Fiber Patch Cord Connector type: Communication Test Equipment FC To LC 9/125um Fiber Optic Patch Cord 0

Mini type 1xN 2xN PLC splitter with connectors TELCORDIA 1209&1201 STANDARD Dawnergy’s planar light wave circuit (PLC) splitter is optical power management device which uses silica optical waveguide technology. It has small size, high reliability, wide operating wavelength range. It is widely used in PON networks and realizes optical signal power splitting. Features: Low insertion loss Low PDL Good channel uniformity High-reliability and stability Qualified according to Telcordia 1209 and 1221 requirements Parameters 1x2 1x4 1x8 1x16 1x32 1x64 Operating Wavelength(nm) 1260~1650 Insertion Loss (dB) Typical 3.6 6.8 10 13.1 16.2 20 Max(P/S) 3.8/4.0 7.2/7.4 10.5/10.7 13.6/13.7 16.5/16.8 20.5/21.0 Uniformity (dB) Typical 0.3 0.4 0.5 0.6 0.8 1.2 Max 0.4 0.6 0.8 1.2 1.5 2.5 PDL (dB) Typical 0.1 0.1 0.15 0.15 0.15 0.2 Max 0.2 0.2 0.3 0.3 0.3 0.4 Return Loss (dB) Min 55 Directivity (dB) Min 55 Fiber Length (m) 1 (+/-0.05) or customer specified Fiber Type ITU-T G657A1 or customer specified WDL (dB) Typical 0.2 0.2 0.2 0.3 0.3 0.3 Max 0.3 0.3 0.3 0.5 0.5 0.5 TDL (dB) (-40~85℃) Typical 0.2 0.2 0.2 0.3 0.3 0.3 Max 0.4 0.4 0.4 0.5 0.5 0.5 Operating Temperature (℃) -40~85 Storage Temperature (℃) -40~85 Packaging Size(mm) Bare Splitter 40x4x4 50x7x4 60x12x4 Mini Module 60x7x4 60x12x4 80x20x6 100x40x6 Cassette Type 100x80x10 120x80x18 　 Parameters 2x2 2x4 2x8 2x16 2x32 2x64 Operating Wavelength(nm) 1260~1650 Insertion Loss (dB) Typical 3.7 7 10.8 13.6 16.8 20.5 Max(P/S) 3.9/4.2 7.5/7.8 11.2/11.5 14.2/14.5 17.4/17.7 21.0/21.5 Uniformity (dB) Typical 0.5 1 1 1.2 1.5 2.2 Max 0.6 1.2 1.5 1.8 2 2.7 PDL (dB) Typical 0.1 0.1 0.2 0.3 0.3 0.3 Max 0.2 0.2 0.4 0.4 0.4 0.4 Return Loss (dB) Min 55 Directivity (dB) Min 55 Fiber Length (m) 1 +/-0.05 or customer specified Fiber Type ITU-T G657A1 or customer specified WDL (dB) Typical 0.3 0.3 0.3 0.5 0.5 0.8 Max 0.4 0.4 0.5 0.6 0.8 1.2 TDL (dB) (-40~85℃) Typical 0.3 0.3 0.3 0.4 0.4 0.4 Max 0.4 0.4 0.4 0.5 0.5 0.5 Operating Temperature (℃) -40~85 Storage Temperature (℃) -40~85 Packaging Size(mm) Mini Module 60x7x4 80x12x5 100x20x6 100x40x6 Notes: 1. Measurements are done at room temperature. Connector loss is excluded in the above specifications. 2. S=Standard grade, P=Premium grade

FTTH FAT 2 Ports Fiber Terminal Termination Box Wall Outlet SC Flame retardant White ABS This fiber access terminal is 2cores, ftth mini wall outlet, it mainly used wall mounted or desktop in ftth network, The interface is SC adapters, UPC or APC is ok, it is good choice for CATV, CCTV or GPON networks too. Features With protection doors dustproof, IP30 dustproof,indoor use Suitable for many types of modules, used in cabling network area subsystem Embedded type surface, easy for installation and removal SC simplex or LC duplex coupler surface mounted installation and concealed panel installation All modules are solderless mode Technical specification Item Parameters Cable used 2.0*3.0mm drop cable or indoor cable Fiber cladding diameter 125um (G652 or G657) Fiber diameter 250um or 900um Fiber mode Single mode and multimode Tensile strength >50N Operating temperature -40~+85°C Adapter SC&LC Insertion loss ≤0.2dB (1310&1550nm) Fiber count 2cores

IoT RTU, IoT Gateway, Industrial celluar router, Ethernet I/O module, LoRa gateway etc.

Minimum Order: 1 bags

Product Description Underground 48 Core Outdoor Fiber Optic Cable GYTS Optical Cable Outdoor Duct Underground Direct Buried Armoured Fiber Optic Cable 12 24 48 96core GYTS optical cable generally refers to layer twisted optical cable. The layer twisted optical cable is composed of a plurality of casings containing optical fibers twisted into a round cable core around the central reinforcing member. The metal or non-metallic reinforcement is located in the center of the optical cable, and the loose tube containing the optical fiber is arranged around the reinforcement. Features 1. Adopt "SZ" bidirectional layer twisting technology 2. Filling water-blocking ointment step by step, full-section water-blocking 3. The steel (aluminum) belt has reliable bonding with the edge, high strength, and no cracking when twisted 4. Stable fiber excess length control 5. After the cable is formed, the additional attenuation of the optical fiber is almost zero, and the dispersion value does not change 6. Excellent environmental performance, applicable temperature range is -10℃~+70℃ 7, suitable for overhead, pipeline, direct buried and other laying methods Application These corrugated steel tape armored cables are suitable for installation in aerial or duct environment for long haul communication, LAN Product Name GYTS fiber optic cable Fiber Count 12-144 Fibers Construction Stranded Loose Tube Fiber Type Singlemode G.652D Outer Jacket Material PE(Black) Weight 100kg/km Arm , or Layer Aluminum Tape Application Aerial and Duct Jacket Diameter 9.8mm-16.1mm Jacket Material PE Cable Length 1KM-5KM per drum Test Wavelength 1310/1550nm Operation Temperature -20℃ to +60℃ Product Details 11.jpg22.jpg66.jpg FAQ -1.jpg Q1:What are the advantages of your price? A1: We have our own factory, professioanl machinery equipment . We can meet the price advantage of products with the same quality parameters, and we promise to achieve a price of 1%-10% lower than that of our peers. Q2: What is your quality advantage? A2: We strictly according to the ISO9001 quality management system, insisting "Enough Cores, Enough Meters, High Quality, High Performance". Providing our customers with higher quality products and services. Q3. Do you support customized brands? A3: Yes! The professional OEM services will be welcomed to us. Our factory accepts to make the logo free for bulk orders. Q4: What are the benefits of working with you? A4: New customers can enjoy AIXTON’s stock and annual year-end dividends, and support long-term cooperative customers to upgrade to global agents and enjoy more discounted prices. glasfaserkabel

30 Meter Monopole Painting Coating Wifi Tower Monopole Tower What Is Monopole Tower? Monopole Tower belongs to the technical field of pipe towers, and includes a working platform connected with the tower body and the upper part of the tower body. The bottom wall of the tower body is provided with a lower door hole, and the wall of the work platform is provided with a door opening, and the antenna bracket is fixed on the fence of the working platform, and the structure of the tower body is set by the main pole of the ladder and the main pole of the ladder. A ladder formed by a crosspiece, the main pole of the ladder is fixedly connected with the support frame, and the support bracket is screwed with the connecting bracket disposed on the inner wall of the tower. The advantages of the Monopole Tower are: the structure is simple and reasonable; the appearance is beautiful; the installation and use are convenient. And compared to the angle steel tower, the footprint is smaller. Highlights of JIAYAO self-suppo , rting tower ● Leading design concept. ● Versatility, modular design, flexible configuration of accessories. ● Tower group design, modification and adjustment. ● The tower section is universal, and the same tower section taken from the same mother tower is completely common in different tower types. ● Lower costs. ● Self-supporting tower light weight. ● Self-supporting tower installation cost is good. ● Self-supporting tower installation time is short. ● High reliability. ● The design and processing of JIAYAO's self-supporting tower products are in line with ISO 9001:2000 quality management system. ● 50 years design life.

Wholesaler Types Of Communication Towers Features: 1. The seamless steel pipe is used as the column material, the wind load coefficient is small, and the wind resistance is strong. 2. The tower column is connected by an outer flange, and the bolt is pulled, which is not easy to damage and reduces maintenance costs. 3. The tower is arranged in a triangular shape to save steel. 4. The roots are small, the floor space is small, the land resources are saved, and the site selection is convenient. 5. The tower body is light in weight, and the new three-leaf cutting board foundation reduces the basic cost. 6. Truss structure design, convenient transportation and installation, and short construction period. 7. The tower type is designed with the wind load curve changing, and the lines are smooth. It is not easy to collapse in case of rare wind disasters, reducing human and livestock casualties. 8. The design conforms to the national steel structure design specification and tower design rules, and the structure is safe and reliable. Highlights of JIAYAO self-supp , orting tower ● Leading design concept. ● Versatility, modular design, flexible configuration of accessories. ● Tower group design, modification and adjustment. ● The tower section is universal, and the same tower section taken from the same mother tower is completely common in different tower types. ● Lower costs. ● Self-supporting tower light weight. ● Self-supporting tower installation cost is good. ● Self-supporting tower installation time is short. ● High reliability. ● The design and processing of JIAYAO's self-supporting tower products are in line with ISO 9001:2000 quality management system. ● 50 years design life. What Is The Details of JIAYAO 3 Legged Tubular Steel Tower? Design standard TIA/EIA-222-G/F Welding standard AWS D1.1 Galvanization standard ASTM A123 Design Wind Speed Up to 200 km/h Angular steel Material quality Mild Steel:Q235B/ASTM A36/S235JR High Steel:Q345B/ASTM A572/S355JR Allowable  , deflection 0.5 ~1.0 degree Bolt grade Gr 4.8, Gr 6.8, Gr 8.8 Marking Hydraulic Press Stamping What is the height of JIAYAO 3 Legged Tubular Steel Tower we can provide? 5m up to 50m is the tower height we can provide. What antenna can be mounted on JIAYAO 3 Legged Tubular Steel Tower? Type of antenna Description Panel antenna (sector antenna) GSM antenna for 5G:2.52m×0.265m×0.13m, 1.31m×0.32m×0.11m Parabolic reflector(dish antenna) Microwave antenna Diameter:0.6m, 0.9, 1.2m, 1.6m, 1.8m, 2.4m RRU Radio Remote Unit:0.45m×0.32m×0.25m WIFI antenna Grid or parabolic directional antenna / yagi / omnidirectional antennas Other Antenna VHF/UHF Dual-band Antenna FM antenna

Galvanized Microwave Antenna And Communication Self Supporting Tower 4 Legged Angular Steel Tower What Is 4 Legged Angular Steel Tower? 4 legged angular steel tower is a kind of self-supporting communication tower，It can also be called 4 legged angular steel communication tower, telecommunication tower, antenna tower. 4 legged angular steel tower are higher steel structures used all over the world for communication applications. Their function to support antennas for telecommunications, broadcasting and WIFI internet. 4 legged angular steel tower is usually come with pre-designed accessories, just like platforms, ladders with cable tray, antenna brackets, aviation light brackets and fall prevention device, etc. 4 legged angular steel tower are based on either ground or building, and they are commonly designed in trusses structure to carry the wind loads and seismic loads. 4 legged angular steel tower is easy to process, transport and install. The overall rigidity of the angle steel tower is large, the bearing capacity is strong, and the technical application is mature. Highlights of JIAYAO self-suppor , ting tower ● Leading design concept. ● Versatility, modular design, flexible configuration of accessories. ● Tower group design, modification and adjustment. ● The tower section is universal, and the same tower section taken from the same mother tower is completely common in different tower types. ● Lower costs. ● Self-supporting tower light weight. ● Self-supporting tower installation cost is good. ● Self-supporting tower installation time is short. ● High reliability. ● The design and processing of JIAYAO's self-supporting tower products are in line with ISO 9001:2000 quality management system. ● 50 years design life.   What Is The Details of JIAYAO 4 Legged Angular Steel Tower? Design standard TIA/EIA-222-G/F Welding standard AWS D1.1 Galvanization standard ASTM A123 Design Wind Speed Up to 200 km/h Angular steel Material quality Mild Steel:Q235B/ASTM A36/S235JR High Steel:Q345B/ASTM A572/S355JR Allowable  , deflection 0.5 ~1.0 degree Bolt grade Gr 4.8, Gr 6.8, Gr 8.8 Marking Hydraulic Press Stamping What is the height of JIAYAO 4 Legged Angular Steel Tower we can provide? 50m up to 120m is the tower height we can provide. What antenna can be mounted on JIAYAO 4 Legged Angular Steel Tower? Type of antenna Description Panel antenna (sector antenna) GSM antenna for 5G:2.52m×0.265m×0.13m, 1.31m×0.32m×0.11m Parabolic reflector(dish antenna) Microwave antenna Diameter:0.6m, 0.9, 1.2m, 1.6m, 1.8m, 2.4m RRU Radio Remote Unit:0.45m×0.32m×0.25m WIFI antenna Grid or parabolic directional antenna / yagi / omnidirectional antennas Other Antenna VHF/UHF Dual-band Antenna FM antenna

Hot Dip Galvanized Mobile Phone Signal Bts Telecommunication Tower Product Description Our company is a professional steel tower manufacturer with ISO certificates based in China. Supported by the team of professional engineers,technicians,skill workers,we are dedicated to providing our global customers with high quality telecom towers. The detailed information is specified in the following table.We sincerely look forward to cooperating with you.  1.key Details: Place of Origin: Hebei, China (Mainland) ; Brand Name: Jaoyao or OEM ; Model Number: Telecom Tower. Surface treatment: Hot Dip Galvanizied or painted. 2.Packaging & Delivery: Packaging Details: Telecom tower will be bundled by Galvanized strapping as per client's requirements. Deliver:Shipped in 20 days after payment from Tianjin port. Tower members: One steel tower is separated into several bundles. Bolts: Packing material is robust nylon bag or steel drum. We are telecom tower manufacturer. 3. Technical Data Design 1. Design Code TIA/EIA-222-G/F Structure Steel 2. Grade Mild Steel High Tensile Steel GB/T 700:Q235B, Q235C,Q235D GB/T1591:Q345B, Q345C,Q3455D ASTM A36 ASTM A572 Gr50 EN10025: S235JR, S235J0,S235J2 EN10025: S355JR, S355J0,S355J2 3. Design ,  Wind Speed Up to 250 km/h 4. Allowable deflection 0.5 ~1.0 degree @ operational speed 5. Te , nsion strength (Mpa) 360~510 470~630 6. Yield strength (t≤16mm) (Mpa) 355 235 7. Elongation (%) 20 24 8. Impact strength KV (J) 27(20°C)---Q235B(S235JR) 27(20°C)--- Q345B(S355JR) 27(0°C)---Q235C(S235J0) 27(0°C)---Q345C(S355J0) 27(-20°C)---Q235D(S235J2) 27(-20°C)---Q345D(S355J2) Bolts & Nuts 9. ,  Grade Grade 4.8, 6.8, 8.8 10. Standards for mec , hanical properties 10.1 Bolts ISO 898-1 10.2 Nuts ISO 898-2 10.3 Washers ISO 6507-1 11. Standards for Dimensions , 11.1 Bolts DIN7990, DIN931, DIN933 11.2 Nuts ISO4032, ISO4034 11.3 Washers DIN7989, DIN127B, ISO7091 Welding 12. Met , hod CO2 Shielded Arc Welding & Submerged Arc We , lding(SAW) 13. Standard AWS D1.1 Marking 14. Method of marking  , of the members Hydraulic Press Stamping Galvanizing 15.  , Galvanization standard of steel sections ISO 1461 or ASTM A123 16. Galvanizatio , n standard of bolts and nuts ISO 1461 or ASTM A153 Test 17. Fact , ory test Tensile test,Elements analysis, Sharpy tes , t(impact test), Cold Bending,   Preece te , st,Hammer test Capacity 18. Maximum Production Capacity ,   50,000 TON per annum

Wifi Radio Antenna Mast Steel Tower 3 Legged Angular Steel Tower What Is 3 Legged Angular Steel Tower? 3 legged angular steel tower is a kind of self-supporting communication tower，It can also be called 3 legged angular steel communication tower, telecommunication tower, antenna tower. 3 legged angular steel tower are higher steel structures used all over the world for communication applications. Their function to support antennas for telecommunications, broadcasting and WIFI internet. 3 legged angular steel tower is usually come with pre-designed accessories, just like platforms, ladders with cable tray, antenna brackets, aviation light brackets and fall prevention device, etc. 3 legged angular steel tower are based on either ground or building, and they are commonly designed in trusses structure to carry the wind loads and seismic loads. 3 legged angular steel tower need less ground area and suit to construct in many situations. Highlights of JIAYAO self-su , pporting tower ● Leading design concept. ● Versatility, modular design, flexible configuration of accessories. ● Tower group design, modification and adjustment. ● The tower section is universal, and the same tower section taken from the same mother tower is completely common in different tower types. ● Lower costs. ● Self-supporting tower light weight. ● Self-supporting tower installation cost is good. ● Self-supporting tower installation time is short. ● High reliability. ● The design and processing of JIAYAO's self-supporting tower products are in line with ISO 9001:2000 quality management system. ● 50 years design life.   What Is The Details of JIAYAO 3 Legged Angular Steel Tower? Design standard TIA/EIA-222-G/F Welding standard AWS D1.1 Galvanization standard ASTM A123 Design Wind Speed Up to 200 km/h Angular steel Material quality Mild Steel:Q235B/ASTM A36/S235JR High Steel:Q345B/ASTM A572/S355JR Allowable  , deflection 0.5 ~1.0 degree Bolt grade Gr 4.8, Gr 6.8, Gr 8.8 Marking Hydraulic Press Stamping What is the height of JIAYAO 3 Legged Angular Steel Tower we can provide? 10m up to 50m is the tower height we can provide. What antenna can be mounted on JIAYAO 3 Legged Angular Steel Tower? Type of antenna Description Panel antenna (sector antenna) GSM antenna for 5G:2.52m×0.265m×0.13m, 1.31m×0.32m×0.11m Parabolic reflector(dish antenna) Microwave antenna Diameter:0.6m, 0.9, 1.2m, 1.6m, 1.8m, 2.4m RRU Radio Remote Unit:0.45m×0.32m×0.25m WIFI antenna Grid or parabolic directional antenna / yagi / omnidirectional antennas Other Antenna VHF/UHF Dual-band Antenna FM antenna