Telecom Equipment & Accessories

IP55 19 Inch Outdoor Equipment Cabinet Small Wall Mount Or Pole Mount IP55 19 Inch Outdoor Equipment Cabinet Small Wall Mount Or Pole Mount 1. Why need Outdoor Equipment Cabinet Outdoor Telecom Combined with concealed security hinges and a 3 point locking mechanism to provide the ultimate protection.Easy placement on location. The internal of the cabinet has 1 compartment. The cabinets provide a dust and water ingress rating of IP55 or better. This cabinets are ideal for applications where your expensive and sensitive network equipment is exposed environmental factors such as dust and water. 2. Features Of Outdoor Equipment Cabinet Front access to the inside equipment IP level: IP55 Standard 19“ rack for installation Outdoor anti corrosion powder coating The cabinet is dustproof, sunproof and rainproof, can be used in outdoor harsh environment Cabinet cooling: Fan The layout of the cabinet is reasonable, which will facilitate cable access, fixing and grounding High integration, compact structure, easy installation and migration on later stage Anti-theft three point lock, excellent keyhole protection device All the screws&nuts are stainless steel material Support full design according to customer’s requirement All the cables, sealing and heat insulation used in the cabinet are made from flame retardant materials, which comply with GB5169.7 test A

Single/Multi Mode MM Orange Color 4 Core Tight Buffer Indoor Fiber Optic Cale Multi-purpose distribution cable use several 900um flame-retardant tight buffer fiber as optical communication medium,the tight buffer fiber wrapped with a layer of aramid yarn as strength member units and then is completed with a PVC or LSZH (Low smoke,Zero halogen,Flame-retardant)The tight buffer fibre is manufactured by sheathing the fibre with an appropriate buffer material. The diameter of Φ600μm or Φ900μm could be produced. The selection of top- quality fibre, specific production equipment and accurately designed tools ensure a good performance of the product Good mechanical and environmental characteristics Flame retardant characteristics meet the requirements of relevant standards The mechanical characteristics of jacked meet the requirements of relevant standards Soft,flexible,easy to lay and splice,and with big capacity data transmission Meet various requirements of market and clients.

The Huawei R4875G1 Rectifier Module is a digital rectifier with high efficiency and high power density. lt supports a wide input voltage range and provides the 53.5 V DC defaultoutput voltage.The rectifier provides comprehensive protection functions,supports soft start, and produces low noise. Multiple rectifiers can be connected inparallel. With the power monitoring technology, statesof the rectifier and load are monitored in real time, andthe output voltage can be adjusted. Huawei Rectifier Module Key Features Wide input voltage range Wide operating temperature range Low total harmonic distortion (THD) Full digital control Hot swappable Supports a smart electricity meter Supports CAN bus communication Supports LED alarm display Supports voltage adjustment, current adjustment, and current equalization Disconnects at above 320 V AC RoHS compliance TUV, CE, NRTL, EAC, ANATEL, FCC, and RCM certifications, CB certificate

The Liebert CRV+ from Vertiv is the latest row cooling solution for data centers and making it an ideal choice when considering scalability of the IT infrastructure. Liebert CRV+ is a plug-and-play unit with the capability of addressing the needs of both open and contained applications. Targeted for small & medium data centers, the Liebert CRV+ unit provides cooling at server rack level. Liebert CRV+ is the latest thermal management solution from Vertiv in the Row cooling solution, optimized to ensure maximum cooling capacity with minimal footprint. It perfectly fits in your changing infrastructure cooling environment. Liebert CRV+ has been designed to deliver high eiciency and availability 24/7. It oers unique value in compact size. It perfectlyfits in your changing infrastructure cooling environment.Ideally suited for rack-level cooling and specifically designed for high return air temperatures, the Liebert CRV+ optimizes air distribution and maximizes eiciency, delivering both cost and energy-related savings. Ideally suited for rack-level cooling and specifically designed for high return air temperatures, the Kelingyizhi Liebert CRV+ optimizes air distribution and maximizes eiciency, delivering both cost and energy-related savings.Eiciency is further enhanced through the use of zero ODP R410A refrigerant which ensures constant operation at the highest eiciency levels. The is also designed to optimize installation and minimize start up, TM Liebert CRV+ connection and labor investments. Total cost of ownership advantages are also achieved as a result of configuration flexibility. The unit is available for TM Liebert CRV+ integration with existing racks or as a bundled solution combined with racks, UPS and monitoring capabilities.

ZTE ZXDU68B301 embedded power system adopts embedded installation design, which is suitable for standard 19-inch cabinet installation. Nominal output voltage: -48V, nominal output current: 300A. The system can adapt to a wide range of AC input, and has the functions of intelligent battery management and remote environmental monitoring. Product features Power supply technology and computer technology are organically combined to monitor and control various parameters and states of rectifier and AC/DC distribution in real time. Three-phase AC voltage input is adopted, which has a very wide input voltage range and is suitable for areas with unstable power. Flexible configuration, more than 6 48V5OA switching rectifiers can be configured. Switch rectifier has hot-swap function. With automatic battery management function. The monitoring unit automatically measures the charging and discharging current of the battery, and can control the system to float/uniformly charge the battery. Provide secondary power-down function. When the system is switched to battery power supply, there will be audible and visual alarm after the battery voltage is too low. According to the importance of the load, the load is divided into two groups, and the important load has a longer working time. The system adopts multilevel lightning protection technology. Configure heat exchanger, battery heating board (optional configuration) and environmental monitoring board (optional configuration), so that the system has strong adaptability to the field environment. The system has high reliability, with MTBF≥2.2×105h h. Simple structure, dust-proof, waterproof, heat-insulating, burglarproof, moisture-proof, mildew-proof, corrosion-proof and other functions, strong environmental adaptability, and can be used in outdoor harsh environments. Drawer structure is adopted, which is convenient for transportation, installation and maintenance.

Overview Fiber Anchor Clamp are designed for a fast, easy and reliable dead-ending offibre optic cables on access networks with spans up to 100 m. Feature 1, Tools-free cable clamp installation 2, The clamp consists of self-adjusting plastic wedges, which clamp the optical cable without damaging. 3, Installation on any pole hardware fitting: brackets, cross-arms or eye bolt with a min eye of diameter 15mm 4, High Breaking Force 5, Plastic block protect bail from abrasion 6, intensive bump ensure strong grip strength 7, Anti-rust stainless steel bail 8, Special slot ensure stability of inner core 9, Arc design undertake firm fixing of bail Specification Model Material Available Cable (mm) Breaking Force (kn) PA500 nylon body+steel bail 4-8 4 PA1500 9-12 10 PA2000 12-16 12

Model Number:UIYBPF183124A290T320SF Pass Band:290~320MHz Insertion Loss:1.0dB Ripple:0.5 VSWR:1.25 Rejection , :47dB@DC-270MHz Power:20W Connector Type: SMA-F Temperature: -40~+85℃ Dimension:183*124*73mm

Minimum Order: 1 bags

Model Number:UIYBPF100104A Pass Band:400~438MHz Insertion Loss:1.0dB VSWR:1.25 Rejection:50dB@Fc±~20M , Hz Power:20W Connector Type: N SMA Temperature: -40~+85℃ Dimension:100*104*63mm

Minimum Order: 1 bags

Model Number:UIYBPF13587A Pass Band:380~400MHz Bandwidth:5 MHz Insertion loss:2.0dB VSWR:1.3 Rejection:40 dB@Fc±5MHz Power:50W Connector Type: N SMA Temperature: -40~+85℃ Dimension:135*87*68mm

Minimum Order: 1 bags

Model Number: UIYBPF7070A Pass Band: 2090~2190MHz Insertion Loss: 0.6dB Ripple:0.5 dB VSWR:1.3 Rejection:30dB@DC~1980MHz 30dB@2300~3000MHz Power:100W Connector Type: SMA-F N-F Temperature: -40~+85℃ Up to 20GHz. Military, space and commercial applications. Low insertion loss, high isolation, high power handling. Custom design available upon request.

Minimum Order: 1 bags

Model Number：UIYBPF6020A Pass Band:149~165MHz Insertion Loss: 2.0dB VSWR:1.3 Rejection:60dB@88~108MHz 40dB@225~400MHz Power:100W Connector Type: N SMA Temperature: -40~85℃ Dimension: 60*20*20mm

Minimum Order: 1 bags

Model Number: UIYBPF5454A863T870NM Pass Band:863~870MHz Insertion Loss:1.0 dB Ripple Max:0.2 dB VSWR:1.22 Rejection:55dB@DC~833MHz 55dB@903~3000MHz Power:30W Connector Type: N-F to N-M Temperature: -30~+70℃

Minimum Order: 1 bags

Model Number:UIYBCI2528A3T6SF Frequency Range:3.0~6.0GHz Insertion Loss:0.5dB Isolation:18dB VSWR:1.3 Forwar , d Power:100W Reverse Power:20W Connector Type: SMA-F Temperature: -55~+85℃ Dimension:25.4*28*14mm Frequency range 56MHz to 40GHz, up to 2000W power. Military, space and commercial applications. Low insertion loss, high isolation, high power handling. Custom design available upon request.

Minimum Order: 1 bags

Model Number:UIYBCC8040B18T38SF Frequency Range:1.8~3.8GHz Power:100W Connector Type: SMA Female Insertion Loss:1.4dB Isolation:34 dB VSWR:1.35 Temperature: 0~+70℃ Frequency range 56MHz to 40 GHz, up to 2000W power. Military, space and commercial applications. Low insertion loss, high isolation, high power handling. Custom design available upon request.

Minimum Order: 1 bags