Import-Export Bulletin Board Post an Offer to Sell

New here? Please subscribe
to post trade leads. It's FREE!

Tools & Hardware


Home > Offers to Sell > Tools & Hardware

Browse leads by category:
    
    
    
 

Summary of 4/16/14 5:19 GMT:>> Show Compact View
4/15/14 0:44 GMT
earth-drilling,Deep drill/pile driver,Deep drill/pile driver

Earth Drilling/Earth Excavator/pile driverPile Driver,Earth Drilling, Pile Driver We produce pole drilling machine/hole Digger/earth drilling, which is widely used for cement pole and solar panel support in digging hole, drilling hole, driving pile .Our hole Digger/Earth Drilling/drilling machine is the first hydraulic hole Digger/Earth Drilling/drilling machine, its speed is five or six than other hole Digger/Earth Drilling/drilling machine. This hydraulic hole Digger/Earth Drilling/drilling machine is based on independent research , first adopt tractor as power, topping drill pipe design, achieve driving and operation integration. It has good cross-country performance. Tractor can carry trailer lever to achieve digging integration. pole drilling machine price /hole Digger/earth drilling manufacturer Pole drilling feature: 1, use type 50-65 tractor as main power. Its good cross-country performance ,can well adapt digging work in outside. Fully hydraulic form , drilling down at the same time by two large tonnage oil cylinder promote drill bore into the downward, largely improve the work efficiency. pole drilling machine price /hole Digger/earth drilling, Topping drill pipe design, Only one person can finish work. Technical data Power equipment:50-65 tape four-wheel tractor Drilling depth : 1-3.8 m Drilling diameter:150-1000mm Drill drive form: hydraulic Ascending form: hydraulic Time: 47 second(Dia. 500mm * depth 3 m) Total weight:3.8 T Geological layers: applied in Soil lager ,clay layer, earth with gravel , weathered rock layer, intergeliosol ,etc, not in rock, construction rubbish layer, sand layer, life rubbish. Operation staff: 1 person Construction: 1, for digging cement pole hole in power construction, 2,for digging solar panel support hole in solar electrical energy construction. 3,for piling in construction.

Minimum Order: 1000

Contact:
Phone:
Fax:
Email:
ductrod
0316-7902101
0316-7869911
Send Inquiry
Bazhou DeLi Power Tools Factory
No.286,ying bin road, bazhou city, hebei province ,china
Langfang 065700
China
4/15/14 0:43 GMT
Powered Winches, best factory Cable Winch,ENGINE WINCH

Engine Winch This engine winch is used to work for tower assembly or moving heavy and bulky materials when stringing works for overhead conductors or OPGW,and very easy to move as that is light. Features Engine can start by switch. Easy operating. The brake can hold heavy materials when working stopped. Double frame can reduce the machine load from engine vibration. Transmission convert to shift the speed is very easy and smooth. Model No. DP-1 DP-3 DP-5 Max. pull 1000kg 3000kg 5000kg Max. speed 5-18m/min 5-18m/min 3.5-15m/min Type Single Capstan with Hand Band Brake Transmission Forward 4step/Reverse 1 step Engine(gasoline) 5HP/2000rmp 8HP/1800rmp 16HP/3600rmp Capstan dia. 130mm 160mm 280mm Dimensions(L*W*H) 1200*620*500mm 1400*620*600mm 1600*720*700mm Weight 220kg 300kg 450kg *Note:Specification will be changed without any information for high quality.

Minimum Order: 1000

Contact:
Phone:
Fax:
Email:
ductrod
0316-7902101
0316-7869911
Send Inquiry
Bazhou DeLi Power Tools Factory
No.286,ying bin road, bazhou city, hebei province ,china
Langfang 065700
China
4/15/14 0:43 GMT
Cable pulling winch, cable puller,Cable Drum Winch

Engine Winch This engine winch is used to work for tower assembly or moving heavy and bulky materials when stringing works for overhead conductors or OPGW,and very easy to move as that is light. Features Engine can start by switch. Easy operating. The brake can hold heavy materials when working stopped. Double frame can reduce the machine load from engine vibration. Transmission convert to shift the speed is very easy and smooth. Model No. DP-1 DP-3 DP-5 Max. pull 1000kg 3000kg 5000kg Max. speed 5-18m/min 5-18m/min 3.5-15m/min Type Single Capstan with Hand Band Brake Transmission Forward 4step/Reverse 1 step Engine(gasoline) 5HP/2000rmp 8HP/1800rmp 16HP/3600rmp Capstan dia. 130mm 160mm 280mm Dimensions(L*W*H) 1200*620*500mm 1400*620*600mm 1600*720*700mm Weight 220kg 300kg 450kg *Note:Specification will be changed without any information for high quality.

Minimum Order: 1000

Contact:
Phone:
Fax:
Email:
ductrod
0316-7902101
0316-7869911
Send Inquiry
Bazhou DeLi Power Tools Factory
No.286,ying bin road, bazhou city, hebei province ,china
Langfang 065700
China
4/15/14 0:42 GMT
Dubai Saudi Arabia often buy Hook Sheave,Cable Block

Cable pulley block/ Cable Block& Cable block &lifter/ Stringing blocks were used to string different  conductors.--Bazhou Dpair power tools Description: We manufacture a lot of models Cable pulling block for different uses in the overhead transmission line construction. They have are used to support conductors, OPGW,ADSS, communication lines The sheave of the pulley blocks are made from higth strength MC nylon,or aluminum materials ,and the frame of blocks are made of galvanized steel. cable pulley block are high strength and flexibility, easy to use, light weight, wear-resisting, and long service life.

Minimum Order: 1000

Contact:
Phone:
Fax:
Email:
ductrod
0316-7902101
0316-7869911
Send Inquiry
Bazhou DeLi Power Tools Factory
No.286,ying bin road, bazhou city, hebei province ,china
Langfang 065700
China
4/15/14 0:42 GMT
Cable Block, best Cable Sheave, factory Current Tools

Cable pulley block/ Cable Block& Cable block &lifter/ Stringing blocks were used to string different  conductors.--Bazhou Dpair power tools Description: We manufacture a lot of models Cable pulling block for different uses in the overhead transmission line construction. They have are used to support conductors, OPGW,ADSS, communication lines The sheave of the pulley blocks are made from higth strength MC nylon,or aluminum materials ,and the frame of blocks are made of galvanized steel. cable pulley block are high strength and flexibility, easy to use, light weight, wear-resisting, and long service life.

Minimum Order: 1000

Contact:
Phone:
Fax:
Email:
ductrod
0316-7902101
0316-7869911
Send Inquiry
Bazhou DeLi Power Tools Factory
No.286,ying bin road, bazhou city, hebei province ,china
Langfang 065700
China
4/15/14 0:41 GMT
Drum Trailer,Cable Winch,Cable Drum Trailer, cable trailer, cable drum tabl

Specifications Drum Trailer,Cable Winch,Cable Drum Trailer,cable trailer,cable drum table,cable drum carriage Cable Reel Puller, Cable Reel Trailer,Reel Cable Trailer 1. ISO9001 certificate 2.Uses in the large-scale reel laying 3.many kinds of specification Cable drum trailers Useage : This strong cable drum transport and laying trailer uses the power shifting gear technology,uses nimbly convenient. Uses in loading and unloading, the transportation, the large-scale reel cable laying . Mechanical cable drum trailer Application: used for cable drum hauling and cable pulling-pushing. Adopt mechanical lifting method, simple operation, stable and durable. The traction tire on the font of cable trailer can change angle at random and easy to move. Equipped with damping device, the stability of trailer was increased greatly. Remarks: the trailer can be transported by container after disassembly.

Minimum Order: 1000

Contact:
Phone:
Fax:
Email:
ductrod
0316-7902101
0316-7869911
Send Inquiry
Bazhou DeLi Power Tools Factory
No.286,ying bin road, bazhou city, hebei province ,china
Langfang 065700
China
4/15/14 0:41 GMT
Cable Reel Trailer,Reel Cable Trailer,Pulley Carrier Trailer, Pulley Traile

Specifications Drum Trailer,Cable Winch,Cable Drum Trailer,cable trailer,cable drum table,cable drum carriage Cable Reel Puller, Cable Reel Trailer,Reel Cable Trailer 1. ISO9001 certificate 2.Uses in the large-scale reel laying 3.many kinds of specification Cable drum trailers Useage : This strong cable drum transport and laying trailer uses the power shifting gear technology,uses nimbly convenient. Uses in loading and unloading, the transportation, the large-scale reel cable laying . Mechanical cable drum trailer Application: used for cable drum hauling and cable pulling-pushing. Adopt mechanical lifting method, simple operation, stable and durable. The traction tire on the font of cable trailer can change angle at random and easy to move. Equipped with damping device, the stability of trailer was increased greatly. Remarks: the trailer can be transported by container after disassembly.

Minimum Order: 1000

Contact:
Phone:
Fax:
Email:
ductrod
0316-7902101
0316-7869911
Send Inquiry
Bazhou DeLi Power Tools Factory
No.286,ying bin road, bazhou city, hebei province ,china
Langfang 065700
China
4/15/14 0:40 GMT
Cable Drum Jacks,Cable Drum Jacks,Cable Drum Handling

Detailed Description Uses for expanding the cable on six division rolling disk Cable Drum Jacks. Features & Benefits The hand to lift cable pay-off stand also called six division cable pay-off stand, Uses for expanding the cable by external force on six division rolling disk. Cable drum jack&cable drum handling/cable handling equipment Cable Drum Jacks,Cable Drum Handling ,Cable Handling Equipment, Hydraulic cable drum jack,Hydraulic lifting jacks for cable drums. Product No.: DL011 Product name: Trapezoidal and hydraulic cable drum jack Application: applied in the supporting of cable drum. With trapezoidal structure, Hydraulic Cable Jack Set can be applied in different kinds of reel specification. Hydraulic lifting make it lift easily, trundles installed on the bottom make it easy to move, simple operation, secure and durable. Product No. Rated load Applicable drum diameter Applicable drum width Axle bar diameter Dead weight DL011-3 3T φ700mm-φ2100mm ≤1500mm φ60mm 90kg DL011-5 5T φ700mm-φ2400mm ≤1700mm φ76mm 130kg DL011-10 10T φ700mm-φ3200mm ≤1800mm φ120mm 210kg Product No.: DL018 Product name: Mechanical cable drum jack Product No. Rated load Applicable drum diameter Applicable drum width Axle bar diameter Dead weight DL018-1 1T φ1160mm-φ1700m ≤1000mm φ60mm 30kg DL018-3 3T φ1400mm-φ2100mm ≤1400mm φ76mm 40kg DL018-5 5T φ1600mm-φ2400mm ≤1600mm φ76mm 40kg Bazhou factory Hydraulic Cable Jack Set,Asia Cable Drum Screw Jack,Manual Jack,Hydraulic Jack,Cable Jack,Cable Drum Jacks,low price Cable Drum Lifting Jack,Cable Drum Jack, pictures Jack Tower.

Minimum Order: 1000

Contact:
Phone:
Fax:
Email:
ductrod
0316-7902101
0316-7869911
Send Inquiry
Bazhou DeLi Power Tools Factory
No.286,ying bin road, bazhou city, hebei province ,china
Langfang 065700
China
4/15/14 0:40 GMT
new type jack Towers,Screw Jacks,sales Cable Drum Jacks

Detailed Description Uses for expanding the cable on six division rolling disk Cable Drum Jacks. Features & Benefits The hand to lift cable pay-off stand also called six division cable pay-off stand, Uses for expanding the cable by external force on six division rolling disk. Cable drum jack&cable drum handling/cable handling equipment Cable Drum Jacks,Cable Drum Handling ,Cable Handling Equipment, Hydraulic cable drum jack,Hydraulic lifting jacks for cable drums. Product No.: DL011 Product name: Trapezoidal and hydraulic cable drum jack Application: applied in the supporting of cable drum. With trapezoidal structure, Hydraulic Cable Jack Set can be applied in different kinds of reel specification. Hydraulic lifting make it lift easily, trundles installed on the bottom make it easy to move, simple operation, secure and durable. Product No. Rated load Applicable drum diameter Applicable drum width Axle bar diameter Dead weight DL011-3 3T φ700mm-φ2100mm ≤1500mm φ60mm 90kg DL011-5 5T φ700mm-φ2400mm ≤1700mm φ76mm 130kg DL011-10 10T φ700mm-φ3200mm ≤1800mm φ120mm 210kg Product No.: DL018 Product name: Mechanical cable drum jack Product No. Rated load Applicable drum diameter Applicable drum width Axle bar diameter Dead weight DL018-1 1T φ1160mm-φ1700m ≤1000mm φ60mm 30kg DL018-3 3T φ1400mm-φ2100mm ≤1400mm φ76mm 40kg DL018-5 5T φ1600mm-φ2400mm ≤1600mm φ76mm 40kg Bazhou factory Hydraulic Cable Jack Set,Asia Cable Drum Screw Jack,Manual Jack,Hydraulic Jack,Cable Jack,Cable Drum Jacks,low price Cable Drum Lifting Jack,Cable Drum Jack, pictures Jack Tower.

Minimum Order: 1000

Contact:
Phone:
Fax:
Email:
ductrod
0316-7902101
0316-7869911
Send Inquiry
Bazhou DeLi Power Tools Factory
No.286,ying bin road, bazhou city, hebei province ,china
Langfang 065700
China
4/15/14 0:39 GMT
Cable Laying Equipment,best price cable pusher

Description The cable pusher version has been designed to allow cable to be lifted in from one side. Cable Laying Equipment design has the advantage of being more compact when used in restricted areas such as a trench. Cable laying machines is easier to lift heavy cable into the side of the pusher than cable pusher is to lift it over the pusher and into the top. The hydraulic power Cable Laying Equipment unit includes the control laying and is positioned remotely, generally on the embankment above the trench.

Minimum Order: 1000

Contact:
Phone:
Fax:
Email:
ductrod
0316-7902101
0316-7869911
Send Inquiry
Bazhou DeLi Power Tools Factory
No.286,ying bin road, bazhou city, hebei province ,china
Langfang 065700
China
4/15/14 0:39 GMT
Cable laying machines, new type Cable Pushers

Description The cable pusher version has been designed to allow cable to be lifted in from one side. Cable Laying Equipment design has the advantage of being more compact when used in restricted areas such as a trench. Cable laying machines is easier to lift heavy cable into the side of the pusher than cable pusher is to lift it over the pusher and into the top. The hydraulic power Cable Laying Equipment unit includes the control laying and is positioned remotely, generally on the embankment above the trench.

Minimum Order: 1000

Contact:
Phone:
Fax:
Email:
ductrod
0316-7902101
0316-7869911
Send Inquiry
Bazhou DeLi Power Tools Factory
No.286,ying bin road, bazhou city, hebei province ,china
Langfang 065700
China
4/15/14 0:39 GMT
Straight Cable Roller,Cable Roller Guides,Corner Cable Roller,Nylon Cable R

Detailed Description Cable rollers Used in the cable changing the direction place protection cable not to wear. Features Aluminium Roller, Cable rolling Cable Guides Divides into according to the material quality: Alloy wheels and MC nylon wheels Type: Tubular and plate type Detailed Product Description Cable rollers Cat. No. Rated Load (kN) Construction Weight (kg) CR0110 10 Cast aluminum frame, aluminum (nylon) roller 5.4/3.6 CR0111 10 Steel tubing frame, aluminum (nylon) roller 4.5/3.1 CR0112 10 Steel tubing, long legs, aluminum (nylon) roller 5.8/4.2 CR0113 10 Steel plate base, aluminum (nylon) roller 5.5/3.7 CR0114 10 Steel tubing frame, aluminum (nylon) roller 4.7/3.3 CR0115 10 Steel tubing frame, aluminum (nylon) roller 4.7/3.3 Sales Aluminium Roller,Cable Roller,manufacture Corner Roller, Best quality Cable Rollers,Cable Laying Rollers,low price Cable Guides

Minimum Order: 1000

Contact:
Phone:
Fax:
Email:
ductrod
0316-7902101
0316-7869911
Send Inquiry
Bazhou DeLi Power Tools Factory
No.286,ying bin road, bazhou city, hebei province ,china
Langfang 065700
China
4/15/14 0:39 GMT
Buy Cable Rolling,Cable Roller, sales Cable Guide ,Cable Laying ,Corner Rol

Detailed Description Cable rollers Used in the cable changing the direction place protection cable not to wear. Features Aluminium Roller, Cable rolling Cable Guides Divides into according to the material quality: Alloy wheels and MC nylon wheels Type: Tubular and plate type Detailed Product Description Cable rollers Cat. No. Rated Load (kN) Construction Weight (kg) CR0110 10 Cast aluminum frame, aluminum (nylon) roller 5.4/3.6 CR0111 10 Steel tubing frame, aluminum (nylon) roller 4.5/3.1 CR0112 10 Steel tubing, long legs, aluminum (nylon) roller 5.8/4.2 CR0113 10 Steel plate base, aluminum (nylon) roller 5.5/3.7 CR0114 10 Steel tubing frame, aluminum (nylon) roller 4.7/3.3 CR0115 10 Steel tubing frame, aluminum (nylon) roller 4.7/3.3 Sales Aluminium Roller,Cable Roller,manufacture Corner Roller, Best quality Cable Rollers,Cable Laying Rollers,low price Cable Guides

Minimum Order: 1000

Contact:
Phone:
Fax:
Email:
ductrod
0316-7902101
0316-7869911
Send Inquiry
Bazhou DeLi Power Tools Factory
No.286,ying bin road, bazhou city, hebei province ,china
Langfang 065700
China
4/15/14 0:37 GMT
low price Cable stockings,Cable Socks,manufacture cable pulling socks

Pulling grips Styles and Applications 1.Medium duty pulling grips are double weave for added strength with greater mesh contact on the cable to handle longer or heavier pulling jobs. 2.light duty pulling grips are single weave with a flexible eye for easy attachment to a pulling line. Cable Pulling Grips are used in general underground electrical construction where pulling tensions are low. 3.slack pulling grips are made of galvanized steel and come in three styles with a single offset eye for easy attachment to a pulling line. cable socks Closed, when the cable end is accessible, split lace and rod closing when cable end is not accessible. Cable grip are used in pulling slack for final placement of underground cable after Cable Pulling Grips has been pulled and longer mesh for higher pulling loads where space is not restricted.

Minimum Order: 1000

Contact:
Phone:
Fax:
Email:
ductrod
0316-7902101
0316-7869911
Send Inquiry
Bazhou DeLi Power Tools Factory
No.286,ying bin road, bazhou city, hebei province ,china
Langfang 065700
China
4/15/14 0:37 GMT
Snake Grips,Cable pulling sock,Pulling grip,Support Grip,Pulling grip

Pulling grips Styles and Applications 1.Medium duty pulling grips are double weave for added strength with greater mesh contact on the cable to handle longer or heavier pulling jobs. 2.light duty pulling grips are single weave with a flexible eye for easy attachment to a pulling line. Cable Pulling Grips are used in general underground electrical construction where pulling tensions are low. 3.slack pulling grips are made of galvanized steel and come in three styles with a single offset eye for easy attachment to a pulling line. cable socks Closed, when the cable end is accessible, split lace and rod closing when cable end is not accessible. Cable grip are used in pulling slack for final placement of underground cable after Cable Pulling Grips has been pulled and longer mesh for higher pulling loads where space is not restricted.

Minimum Order: 1000

Contact:
Phone:
Fax:
Email:
ductrod
0316-7902101
0316-7869911
Send Inquiry
Bazhou DeLi Power Tools Factory
No.286,ying bin road, bazhou city, hebei province ,china
Langfang 065700
China


SOURCE: Import-Export Bulletin Board (http://www.imexbb.com/)
Result Page:   << Previous   |   6  |   7  |   8  |   9  |   10  |   11  |   12  |   13  |   14  |   15  |   16  |   Next >>

Post an Offer to Sell
Home - Offers to Buy - Business Opportunities - Company Profiles

© 1996-2014 IMEXBB.com. All rights reserved.

IMEXBB.com