Home > Offers to Buy > Environment & Recycling > Water Treatment > Pool Cleaning Equipment
Shanghai Qilee's contact us Screw Wastewater Mobile Continuou Sludge Filter
Sludge Filter Press Structure:
Click to Enlarge
The main part of the dehydrator is a filter device that a screw runs through the
stacked fixed rings and moving ring.
The small gaps between fixed rings and moving ring can filter the sludge, and the
lumenbetween screw and rings is filled with polymer grains. The moving ring
transfers the sludge to the end of the machine with pressure and extrudes sludge
The running of the screw drives the moving ring to clean the gaps and avoid jam.
Sludge Filter Press Flow Diagram:
1.The sludge in the sludge sump is carried to the measuring tank by sludge
pump.And the sludge inlet volume can be controlled by adjusting the liquid level
2.Sludge and flocculant will form alum floc in the disposal tank after agitator
mixing, the ideal diameter of alum floc is about 5mm.
3.After gravity thickening in the thickening part, large amount of filtrate will
discharge from the gaps between rings.
4.The thickened sludge is carried forward by the screw and dehydrated
sufficiently under the pressure of the back pressure plate.
5.The dehydrated mud cake is discharged from the gaps between back pressure
plates and screw body. The treating capacity of sludge and water content's rate of
mud cake can be controlled by adjusting the running speed of screw and gaps
between back pressure plates.If you are interested in ro water system price,
please check our website at
https://www.qileegroup.com for details.
Or contact us
Tel: +86 021 5169 7580
Phone: +86 13817134452 &+86 13817145452 &+86 13918724674
Contact person: Xia Miao
Add: Room 412, Xianglu Building, No. 3009, Gudai Road, Minhang District, Shanghai,
SOURCE: Import-Export Bulletin Board (http://www.imexbb.com/)
Involved in International Trade? Become an Advertiser!
Post an Offer to Buy
© 1996-2010 IMEXBB.com. All rights reserved.