Import-Export Bulletin Board  

Home > Offers to Sell > Industrial Machinery & Equipment > Other Industrial Equipment > Motors

Contact: Tony Ye
Company: Hengfengtai Precision Machinery Co.,ltd
Binhai Industrial Zone, Wenzhou, Zhejiang, China
Wenzhou 325025
China
Phone: 0086-577-8611-9817
Fax: 0086-577-8611-8098
E-Mail: Send Inquiry
Date/Time:  7/27/17 7:44 GMT
 

SMR/SMSR shaft mounted gearbox similar with Fenner

About SMR Series Shaft Mounted Gearbox

Model selection table ( Helical gear reducer ):

Ratio:5:1

Model HXGF30 HXGF40 HXGF50 HXGF55 HXGF65 HXGF75 HXGF85 HXGF100
Output(RPM) 100-400 100-400 100-400 100-400 100-400 100-400 100-400 100-400
Power Rating(KW) 2.68-7.14 4.2-9.66 6.62-15.65 10.29-
24.57 15.12-35.91 25.2-59.9 36.2-81.9 62.2-134.2
Permissible torque(Nm) 256 401 632 983 1444 2407 3457
5940

Ratio:13:1 and 20:1

Model HXGF30 HXGF40 HXGF50 HXGF55 HXGF65 HXGF75 HXGF85 HXGF100
Output(RPM) 10-115 10-115 10-115 10-115 10-115 10-115 10-115 10-115
Power Rating(KW) 0.29-3.11 0.49-4.62 0.82-7.81 1.25-
11.55 1.97-17.01 3.11-27.09 4.9-40.7 7.8-60.5
Permissible torque(Nm) 277 468 783 1194 1881 2970 4680
7449

Maintenance:

After 300-hour operation, please change the oil, and flush the gear uint with
suitable detergents.

Please do not mix the mineral oil and synthetic oil.

Products benefits:

1) All torque arms/fulcrums are plated to eliminate them being rusted in use.

2) The shaft mounts have labyrinth sealing on the conveyor end and input shaft
end so that the oil seal is safe from contamination.

3) The front end of the shaft mount has a hub cover to protect the front oil
seal as well as moving part of the gearbox.

4) Input shaft front bearing is a roller bearing as it takes in more radial
load from the belt pressure.

5) Breather plugs are extended so that the dust does not clog the breather
hole.



6) All oil seals imported from Taiwan.

7) Our gear units now have higher load capacity as the gears have been
redesigned.

8) All gears are case carburised to a casedepth and ground inhouse.

9) All gear units are machined on a CNC machining center so are very accurate
in alignment.



10) Finish of all gear units are far superior to any other brand being sold out
of India.

11) The shaft mounts are available with keyed hollow shafts or hollow taper
bores with taper clamps.

Applications:

Screw conveyors, belt conveyor bulk handing machinery and process equipment
for:Baggage handing.

Aggregate and mining.

Mixers and process equipment.

Grain and agriculture.

Minimum Order: 10 pieces

SMR/SMSR shaft mounted gearbox similar with Fenner
Enlarge Click to Enlarge
SOURCE: Import-Export Bulletin Board (http://www.imexbb.com/)
Report Abuse

Involved in International Trade? Become an Advertiser!

Post an Offer to Sell

© 1996-2010 IMEXBB.com. All rights reserved.

IMEXBB.com