Home > Offers to Sell > Environment & Recycling > Waste Management > Recycling Machinery
||Dezhou Qunfeng Machinery Manufacturing Group
||Ningjin Industrial Park, Dezhou City, Shandong Province, China
||11/28/19 0:58 GMT
Vertical Waste transfer Station System
The system has adopted the most advanced vertical compression technology.
theory of the process, in simple words, is discharging waste from above
vertical container below taking advantage of the gravity. It is as simple
dump the garbage in the trash can every day. Our technology is to make
the limited space and simplify the process of waste transfer.
The waste container is considered as the core of the whole system. Every
equipment of the transfer station is working around the container
indirectly. After the transfer truck places the container in the
position, the discharging hopper will be put above the container so that
can be discharged directly to it permitting no waste dropping out of the
container. When the container is fairly full, the compactor will move to
container and start to compress. As long as the container is completely
will be mounted on a transfer truck though a special guiding device to be
transported for final disposal. The whole process is fairly simple and
maintenance friendly. It can work properly even when the power is off.
central control panel, weighing device, deodorization and dust-cleaning
are considered in the system.
1. Space saving
Transfer truck and garbage truck can be working in the same site without
2. Convenient discharging
Direct vertical discharging to the container with higher efficiency.
3. No trash dropping out
Vertical compression from above to below inside the container allowing no
dropping out of the box.
4. Fully sealed container
The device is fully sealed allowing no waste liquid leakage from the
5. Large transfer volume
Heavy detachable transfer truck is recommendable. More than 16 tons per
6. Low power consumption
Taking advantage of the gravity, the waste will be discharged directly to
container and compressed by the compactor, which only needs 30kw for
The whole set of equipments is located on foundation built on the
design includes the rampway and the area of operation site, which can be
closed or semi closed (only the rampway will be located outside).
The nominal capacity of the design is 1000 tons/day and the station will
occupy approximately an area of 8000 ㎡. The operation is 78m long, 67m
18.7m high, approximately 4900 ㎡ for the main buildings.
The main workshop of the station contains discharging area, transfer
rampway, compaction and load area, auxiliary area. The compaction and
is located in the center of the studio, the second floor of which is the
discharging and the first floor is the auxiliary area.
The whole operation area is located underground. Over the station small
and green area can be built. Consequently this type of waste compaction
ideal to be built under park, square and urban green zone as a perfect
for insufficient space problem in cities.
Vertical Waste transfer Station System has a large capacity of
can reach to 1200 tons/day. The main buildings of the system occupy an
3940 ㎡ and the operation area is 60m long, 56m wide and 10 high.
The waste collection trucks and transfer trucks enter and leave the
rampway. The discharging area is located in the first underground floor,
transfer area, office area and other area in the second underground
http://www.peaks-eco.com/large-scale , -was , te-transfer-station-
, comp , action-system-5.html
Minimum Order: 1 sets
Click to Enlarge
SOURCE: Import-Export Bulletin Board (http://www.imexbb.com/)
Involved in International Trade? Become an Advertiser!
Post an Offer to Sell
© 1996-2010 IMEXBB.com. All rights reserved.