Import-Export Bulletin Board Zhangjiagang free trade zone kenshine internationa Logo

Home > Offers to Sell > Industrial Machinery & Equipment > Other Industrial Equipment > Other Industrial Equipment

Contact: Shine Xin
Company: Zhangjiagang free trade zone kenshine internationa
Room 216-108, Textile resources market
Suzhou 215600
China
Phone: +8651258583352
Fax: +86-0512-58583352
E-Mail: Send Inquiry
Date/Time:  6/12/19 21:22 GMT
 

ZS horizontal stainless steel stamping centrifugal pump

ZS horizontal single-stage stainless steel centrifugal pump is made of advanced
technologies such as stamping and expanding welding of stainless steel plate. The
pump can replace traditional IS pump and general corrosion resistant pump.

ZS stainless steel single stage pump has the characteristics of beautiful
appearance, light structure, high efficiency and energy saving, durability, light
corrosion resistance and low noise etc.

Product application

ZS stainless steel horizontal single-stage centrifugal pump is a multifunction
pump with wide range of application. The pump can transport various liquids
including water or industrial liquid with different temperature, flow and pressure
ranges.

Water supply: water plant filtration, transmission and subdivision water supply
and main pressurization;

Industrial supercharging: process water system, cleaning system;
Industrial liquid transportation: boiler feed water, condensation system, cooling
and air conditioning system, supporting machine tools, acid and alkali
transportation;

Water treatment: distillation system or separator, swimming pool, etc.

Irrigation, petroleum and chemical industry, medicine and health, etc.
Installation conditions:

ZS model stainless steel horizontal single-stage centrifugal pump is a direct
coupling of pump shaft, consisting of pump, pump shaft and standard motor:

1) the pump shall be installed in a ventilated and anti-freezing place;

2) the installation of the pump shall ensure that the pump is not affected by the
tension of the system pipelines when in use;

3) if the pump is installed outdoors, it must be equipped with appropriate cover
to prevent water or condensation of electrical components;

4) in order to facilitate inspection and maintenance, adequate space shall be left
around the unit;

5) the electrical wiring device shall ensure that the pump is not damaged by lack
of phase, voltage instability, leakage and overload;

6) the pump shall be mounted on the base horizontally, with the suction inlet of
the pump in the horizontal direction and the discharge outlet of the pump in the
vertical direction.

Operating conditions:

Clean, thin, non-flammable and explosive liquids that do not contain solid
particles and fibers;

Liquid temperature:

Normal temperature -15 to 70 degree Celsius

Hot water type +70 to 110 degree Celsius

The highest ambient temperature is 40 degree Celsius

The highest altitude is 1000 meters;

Maximum system pressure is 10bar.

motor:

The motor is fully enclosed, air-cooled two poles standard motor.

Protection grade: IP55;

Insulation grade: F;

Standard voltage: 3Phase,380v

Minimum Order: 1 sets

ZS horizontal stainless steel stamping centrifugal pump
Enlarge Click to Enlarge
SOURCE: Import-Export Bulletin Board (http://www.imexbb.com/)
Report Abuse

Involved in International Trade? Become an Advertiser!

Post an Offer to Sell

© 1996-2010 IMEXBB.com. All rights reserved.

IMEXBB.com