1-1B Single screw thick slurry pump

I-1B thick slurry pump is a power equipment used for conveying.
This device is a single screw volumetric rotary pump, which utilizes the rotation
of an eccentric single screw in a double screw liner to move the concentrated
slurry along the spiral groove from the suction port to the discharge port,
achieving the pump's conveying function.
Features
1. It can transport high concentration, high viscosity<10000 PaS and suspended
slurry containing particles.
2. The conveying fluid flow is stable, without overcurrent, pulsation, stirring, or
shearing of the slurry.
3. The discharge pressure is independent of the rotational speed, and high
discharge pressure can be maintained even at low flow rates.
4. The flow rate is proportional to the speed, and flow regulation can be achieved
through a variable speed mechanism or a speed regulating motor.
5. Strong self-priming ability, can directly suck liquid without the need for a
bottom valve.
6. The pump can be reversed, and the liquid flow direction is changed by the
rotation direction of the pump, which is suitable for situations where the pipeline
needs to be flushed in the reverse direction.
7. Smooth operation, low vibration and noise.
8. Simple structure, easy disassembly and maintenance.
This pump is widely used in chemical, pharmaceutical, brewing, papermaking, food
and other units.
Structure:
I-1BB type: Shell casting, transmission components (main shaft, screw, and winding
shaft) made of 2Cr13 stainless steel, suitable for conveying general neutral and
concentrated slurry, as well as general slightly acidic and alkaline slurry.
I-1BF type: The transmission components and pump casing in contact with the slurry
are both made of stainless steel, suitable for conveying food, pharmaceutical, and
corrosive slurry.
Rubber bushings are available in general wear-resistant rubber, food grade rubber,
and oil resistant rubber for users to choose from.
The transmission methods include direct transmission between the motor and the pump
shaft, direct transmission between the motor and the pump through a reducer, and
transmission between the motor and the pump shaft through a V-belt pulley.
There are generally enclosed, explosion-proof, and electromagnetic speed regulating
motors available for use with electric motors, as well as continuously variable
transmissions and gear reducers for users to choose from them.

Minimum Order: 1 sets

Click to Enlarge