10/100/1000Mbps Ethernet Switch 5GE

Features
5*1000M Ethernet ports with auto-negotiation function

Support 1000M speed rate, MDI/MDIX and half/full-duplex with auto-negotiation
function

Each port has the complete LED Indicator light

Support single mode single fiber, single mode dual fiber, multi-mode dual fiber
and SFP slot

Support IEEE802.1d Spanning Tree

Each port supports wire-speed switching, 64~1518 frame length can reach the
wire speed

Support 9216bytes Jumbo packet

Internal 4K MAC Address Entities

Support high performance QoS function on each port

Support multicast to avoid network congestion

Support 5-16V voltage input

Support 4KV port lightning protection

VLAN DIP effectively solve the network congestion and lagging caused by
broadcast storm.

Require no configuration and will instantly operate as soon as you power it up

Use low-power consumption chips, only 2.0W in full load conditions
The HS 5GE is a 10/100/1000Mbps Ethernet Switch hub for FTTD desktop
installation. HS 5GE is with 5 10/100/1000Mbps RJ45 ports; as a switching hub,
it shares 1 Ethernet cable with other 4 terminal devices such as computer,
router or switch, etc..

As the main connecting devices in a LAN network, Etherent switches are one of
the mostly applied network devices. If there are over loaded users, busy APPs
and all kinds of servers in your LAN networks, and the network infustructure is
never adjusted with the increase of above changes then the performance of the
network transmission would be severely affected. The best solution would be the
apply of a gigabit desktop Ethernet switch.

The function of switches is totally different under different network
environments. It’s also different story between adding new switches under
current network environment and replacing current switches with more ports. The
point of using switches is to reduce and detect the data flows in the network,
if one specific switch has to forward all the packets received under poor
deployment, then the other switches will not be able to display their best
performance and the transmission speed will also be affected. Except the
position of switches, it will also lead to problems if we deploy switches at
the locations with small data load and few packets. Under such circumstances, a
switch hub would be a perfect solution. When the current network is not very
crowded, a switch HUB would be perfect to solve the current network issues.

HS 5GE is with super small size and nicely designed blue metal case. It can fit
in any spaces as it’s super compact. Without extra wiring, it can help to
improve your cabinet and desk back to be neat and tidy enough. And as a gigabit
switch HUB, it maintains the fast Gigabit transmission speed without any
compromise. If you need a small switch HUB and need to connect with less than 5
devices, it would be the perfect choice for you.

The HS-5GE series unmanaged switches are full gigabit switches which are
specially designed for high forwarding network environment such as school,
family, SMEs and mini monitoring. It has 5 10/100/1000Mbps adaptive Ethernet
ports. All ports support wire-speed forwarding and the data rate is up to
1000Mbps. There is lightning protection to ensure smooth and stable operation.
Auto MDI/MDIX is also available. No configuration is required, it will
instantly operate as soon as you power it up.

Shenzhen Huashi Network Technology Co. Ltd. was established in June 2011, which
is an original manufacturer of networking and fiber products. We provide poe
extender repeater, poe ethernet repeater, ethernet switch 1000 mbps, fast fiber
converter, POE Switch, Ethernet Extender and etc. Want to know more? Please
contact us.

Minimum Order: 500 pieces

Click to Enlarge