15inch Rim Size Car Wheel 7600 Caliper 285*24mm Kit For Renault Clio Mk1

Brake Caliper AP7600
Disc Size 285*24mm
Center Bell /Bracket Round/Flower/Floating Design /According car data /color
customized
Brake Pads 45mm pads area
Brake line Concave mouth/Convex mouth




In addition to regular inspection and timely replacement of worn friction
components, the brake system should also be regularly maintained:
Use a solvent-based cleaner to clean the surfaces of the brake friction
components and their heat dissipation channels. Be careful not to use cleaning
agents containing lubricating ingredients, and avoid soaking the rubber.
Use high-temperature (above 600°C) and impact-resistant lubricants in the
mutual moving parts of the brake friction components to lubricate, assist heat
dissipation and filling, and avoid eccentric wear. Be careful not to use
lubricants that are not resistant to high temperature, such as butter, which
will have the opposite effect once they are dried.
Use high-temperature (above 600°C) and impact-resistant lubricants on the
backside of the brake friction components, such as the muffler sheet, to
eliminate brake squeal.
Use lubricant with high temperature resistance (above 120°C) at the
positioning pin of the brake cylinder to ensure the effective time of the
brake. Note that lubricants that are not resistant to high temperatures such as
butter cannot be used.
Apply a long-term protective agent to the rubber boot of the brake cylinder and
the rust-prone parts to protect the normal operation of the piston and ensure
the effective time of the brake.
Apply a long-lasting lubricant to the joint surface of the tire rim and the car
hub to avoid seizure.
Note that the braking system is related to the personal safety of the drivers
and passengers. If incorrect products, counterfeit and shoddy products are
used, or improper operation, it is very easy to cause accidents, so be sure to
use a qualified service provider. , products of well-known companies, such as
3M, BG, Wynn's and other brands to ensure safety.
Due to the need for heat dissipation, the braking system is completely exposed
to the erosion of the complex road environment. Mud, water, electrolytes, and
oil stains on the road will affect the braking system.
The friction working surface of the brake is adhered by oil and dust, which
will reduce the friction coefficient and reduce the braking efficiency;
The running track of the brake assembly is blocked by dust, which may cause
"eccentric wear", which reduces the effective friction area and reduces the
braking efficiency;
Brake whistle caused by the aging of brake system components;
Brake components are corroded and rusted. For example, the piston of the wheel
pump is protected by a rubber boot. Once the rubber is aged, water will enter
the working surface of the wheel pump and cause rust, which will affect the
effective time of the brake.
The brake heat dissipation channel is blocked by muddy water and dust, which is
easy to cause brake failure in road conditions such as long downhill.
The rim of the tire and the hub of the car are seized, and the tire is
difficult to disassemble.
To sum up, the braking system is the most important part of the car, and it is
related to the safety of the drivers and passengers. It may not be felt at
ordinary times, but in high-speed driving or special road conditions, a well-
functioning braking system can save lives. Therefore, proper maintenance of the
brake system is very necessary.

Click to Enlarge