20000kg/H Pressure Spray Dryer Steam Heating with observation door

YPG series pressure-spray granulating and drying machines can spray-granulate
size mixture with high content of solid under pressure and dry it into globular
grain product. Dried powder having a good fluidity will quickly fully fill in
mold in a homogeneous way, keeping a constant content of residual water and
looseness. The powder can be applied for molding products under static pressure
to increase a service lifetime of mold 4-8 times in comparison with that used
for mechanically granulated powder. The molded products have a good uniformity
and high degree of finish, so they are widely used in the trades of porcelain
bricks, tablewares ceramic wafers, ceramic materials, ferrite magnetic
materials, etc.



◆ This equipment connects two functions,drying and granulating, together. The
needed ball granule with certain size and ratio can be produced in accordance
with requirements of process to adjust pressure, flow, and size of atomizing
hole.



◆ The tower body, pipes and separator of the set where would contact the
products are made of AISISUS304 or AISISUS304L or AISISUS316L or AISISUS316.
There is a safe heat-preservation layer between inner and outer cases of the
drying tower body. The filled material is fine glass cotton. The tower body is
also equipped with observation door, sight glass, lamp-house, control meters
and instruments that is controlled and displayed through electric control
panel.

Click to Enlarge