2mm 4mm ASTM 304 Stainless Steel Seamless Pipe Weld Tube

304 stainless steel is a common material in stainless steel, the density of
7.93g /cm³; Also known in the industry as 18/8 stainless steel, meaning
containing more than 18% chromium and more than 8% nickel; High temperature
resistance 800℃, has the characteristics of good processing performance, high
toughness, widely used in industrial and furniture decoration industry and food
and medical industry.

Most of the requirements are to maintain the original appearance of the
building for a long time. In determining the type of stainless steel to be
selected, the main consideration is the required aesthetic standards, the
corrosion of the location of the atmosphere and the cleaning system to be used.
However, other applications increasingly seek only structural integrity or
impermeability. For example, the roofs and side walls of industrial buildings.
In these applications, the owner's cost of construction may be more important
than aesthetics, even if the surface is not very clean. 304 stainless steel
works quite well in dry indoor environments. However, in rural and urban areas,
it is necessary to wash frequently if it wants to maintain its appearance
outdoors. In heavily polluted industrial areas and coastal areas, the surface
can be very dirty and even rust.

But to achieve the aesthetic effect in the outdoor environment, it is necessary
to use nickel-containing stainless steel. Therefore, 304 stainless steel is
widely used in curtain wall, side wall, roof and other architectural purposes,
but in the serious erosion of the industrial or Marine atmosphere, the best use
of 316 stainless steel. Stainless steel door, people have fully realized the
advantages of using stainless steel in structural applications. 304 and 316
stainless steel are included in several design guidelines. Because "duplex"
stainless steel 2205 has combined good atmospheric corrosion resistance with
high tensile strength and elastic limit strength, this steel is also included
in the European guidelines. In fact, stainless steel is manufactured in all
standard metal shapes and sizes, and there are many special shapes. The most
commonly used products are made of sheet and strip steel, as well as medium and
thick plates for special products, for example, hot rolled structural sections
and extruded structural sections. There are also round, oval, square,
rectangular and hexagonal welded pipe or seamless steel pipe and other forms of
products, including profiles, bars, wires and castings.

Minimum Order: 1 tons

Click to Enlarge