3000kg 6 Inch Heavy Duty Casters Double Wheel Castors Aging Resistance

How to prolong the service life of casters is the concern of many users. Hanke
casters will focus on the following:First, confirm the caster selection with
the caster supplier, involving the bearing of the caster, and the material
shall be selected reasonably according to the actual application environment.
There are still some factors to pay attention to after product selection, as
follows:

1. Casters shall be correctly and reliably installed at the designed position.

2. The installed caster support must have sufficient strength and reliable
materials.

3. The function of casters shall not be changed and shall not be affected by
the installation device.

4. The rotating axle must always be vertical.

5. The fixed casters must be in line with their axles.

6. If only rotating casters are used, they must be consistent.

7. If fixed casters are used with rotating casters, all casters must be
compatible with each other and must be recommended by the manufacturer. If
casters are used in the following areas: outdoor, coastal areas, areas with
strong corrosion and / or harsh service conditions, special products must be
specified.

When the temperature is lower than 5 ℃ and higher than 30 ℃, the efficiency
of casters will decrease,especially when the service temperature is lower or
higher than the above data, the listed normal load may be affected. Special
products will be described in detail. The complete caster is assembled from the
components. The manufacturer is only responsible for the complete castors
manufactured from the original parts.

Daily maintenance of casters: oil lubrication of axles and rotating bearings;
After installation, tighten the axle and / or adjustable center pin. Any
detergent used shall not contain corrosive and abrasive components.

Click to Enlarge