Import-Export Bulletin Board Dongguan Songshun Mould Steel Co., Ltd. Logo

Home > Offers to Sell > Minerals & Metals > Iron & Steel > Other Steel

Contact: songshun steel
Company: Dongguan Songshun Mould Steel Co., Ltd.
1st Floor, No. 1, Dongda Fourth Street, Shatou Community, Chang'an Town
Dongguan 523846
Phone: 076985475596
E-Mail: Send Inquiry Member for over 1 year
Date/Time:  2/1/23 8:41 GMT

34CrNiMo6 Steel Bars Alloy high strength 34CrNiMo6 Steel Bars Supply

34CrNiMo6 is a typical difficult-to-machine material, which is widely used in
the manufacture of important parts such as camshafts and connecting rods of
engines. 34CrNiMo6 alloy is high strength, because of its excellent
comprehensive mechanical properties, it is widely used in the manufacture of
important parts such as camshafts and connecting rods of engines, and its
machinability is poor, so it is a typical difficult-to-machine material.

For 34CrNiMo6, its quenching and tempering process is 850 oil quenching and 580
degree tempering
① Quenched and tempered structural steel
②Surface hardened structural steel
①The carbon content of quenched and tempered steel is generally about 0.25% to
0.55%. For structural parts with a given cross-sectional size, during quenching
and tempering (quenching and tempering), if they are hardened along the cross-
section, the mechanical properties will be good. If it is hardened and free
ferrite appears in the microstructure, the toughness will decrease. For steels
with a tendency to temper brittleness, such as manganese steel, chromium steel,
nickel-chromium steel, etc., they should be cooled quickly after tempering. The
quenching critical diameter of this type of steel increases with the increase
of grain size and alloy element content. For example, 40cr and 35simn steel is
about 30-40mm, while 40crnimo and 30crni2mov steel is about 60-100mm, which are
often used in the manufacture of bearing Structural parts such as shafts and
connecting rods with large loads.
②Surface-hardened structural steel is used to manufacture components with hard
and wear-resistant surfaces and flexible cores, such as gears and shafts. In
order to make the core of the part have high toughness, the carbon content in
the steel should be low, generally 0.12 to 0.25%, and there should be an
appropriate amount of alloying elements to ensure proper hardenability.
Nitriding steel also needs to add alloying elements (such as Al, Cr, Mo, etc.)
that are easy to form nitrides. Carburizing or carbonitriding steel, after
carburizing or carbonitriding at 850-950°C, quenched and used in a low-
temperature tempering (about 200°C) state. Nitrided steel is used directly
after nitriding treatment (480-580°C), without quenching and tempering

Songshun specialized in Special Steel for almost 20 years. We can supply mold
steel, high speed steel, alloy steel, free cutting steel and etc.Welcome your
contact 24 hours a day!!!
Skype , /Whatsapp/Wechat:+86-18269260283
Songshun Tiktok:songshunsteelfactory
Songshun Facebook:Songshun Steel
Songshun Company Website:
steelpurchase , 41404340

Minimum Order: 1 kilograms

34CrNiMo6 Steel Bars  Alloy high strength 34CrNiMo6 Steel Bars Supply
Enlarge Click to Enlarge
SOURCE: Import-Export Bulletin Board (
Report Abuse

Post an Offer to Sell

© 1996-2010 All rights reserved.