5-12v Mirror Touch Sensor Switch Smart Dresser Bathroom Headlight Dimmer Th

Important Note:
1,This dimmer is only used for indoor and can't be installed in metal material
2,If the LED light is always on after the wire is connected, the switch cannot
be controlled.The reasons are as follows:
a.The positive and negative poles are reversed;
b.The input and output are reversed;
c.The working voltage does not match
Solutions:
1. First determine whether the working voltage of the driver power supply is
DC12V
2. Check whether the positive and negative poles are connected reversely. If
the positive and negative poles are reversed, the blue indicator light on the
switch will not light up.
3. Check whether the input and output are connected reversely.

Feature:
1,Touch sensing technology, easy and simple to operate.
2,It has background light for the touch switch board,it's incorporated,when the
connector power with the switch,the background light of the switch board will
be on,and it's also normally on.
3,Red color for turn off the light, blue color for turn on the light, very
clear for you to observe.
4,No need to find where the switch is in darkness, just touch the light body,
you can easily switch on or off and adjust the brightness.
5,This switch is an isolated touch sensor switch,it is suitable for the led
which has protection Cover such as glass, plastic, pottery. Suitable for
home/hotel bathroom mirror use.

There are 4 styles for your choice :
Style 1: Short press - open - close
Style 2: Long press to adjust the light brightness, short press to turn on and
off
Style 3: Short press the light brightness to change to weak-medium-strong-off
Style 4: it can control 2 colors of light strips, double output A-B-AB-off

Minimum Order: 10 pieces

Click to Enlarge