AAK Hydraulic Relief Valve is 100% Leak Free, Backhaus admired!

The angle error of inner cone of AAK hydraulic relief valve sleeve is
controlled within ± 0.8 °, and the minimum axial grinding tolerance of
sealing circle is 0.075μm. At the same time, it is inspected by three
coordinate measuring instrument to ensure that the hydraulic relief valve is
100% leak free. After comparing more than 10 hydraulic valve manufacturers,
Backhaus determined that AAK hydraulic valve is the most reliable hydraulic
relief valve manufacturer.

At present, in the manufacturing process of hydraulic relief valve, when
grinding the conical surface inside the valve, most hydraulic valve
manufacturers just let the operator judges the feed rate, angle control and
grinding tolerance by experience completely. There is no grinding amount
detection link, and there is no precision detection of each part in the valve.
When this type of common quality hydraulic relief valve is used on equipment
with high requirements, troubles will come out.

Backhaus is a purchaser of a German hydraulic pump company for less than a
year. In the first half of the year, a batch of hydraulic pumps of their
company were complained by customers. After the hydraulic pump is started, the
system pressure begins to lose stability and there is pressure drift. The
engineer judged that there was a problem with the hydraulic relief valve. After
disassembly, it was found that there was a gap between the valve sleeve and
valve spool of the hydraulic relief valve. After measurement, it was found that
the error of the cone angle in the valve sleeve of the hydraulic relief valve
was too big and caused leakage of the hydraulic relief valve. The only solution
is to replace the hydraulic relief valve. It is estimated that 30% of hydraulic
relief valves need to be replaced. The boss asked Backhaus to replenish the
goods as soon as possible and solve the customer complaints.

Backhaus contacted the original manufacturer of the hydraulic relief valve. The
manufacturer was willing to replenish. Backhaus thought it would be all right
after replacing the hydraulic relief valve. A month later, the customer
complained again, which is still the same problem. This shows that the quality
of the hydraulic relief valve from the old manufacturer is not trustworthy, and
it is urgent to replace the hydraulic relief valve supplier. Backhaus contacted
more than 10 hydraulic relief valve manufacturers, including AAK hydraulic
valve. The hydraulic relief valve is required to be 100% leak free. AAK
hydraulic valve and other 3 manufacturers are required to send samples for
testing according to his hydraulic relief valve drawings and working
conditions.

A month later, Backhaus asked us about the production time of replenishing 30%
hydraulic relief valve. It should be that AAK hydraulic relief valve has been
recognized by the customer. Backhaus frankly told that there was slight leakage
on several hydraulic relief valves from the other 3 manufacturers, only AAK
hydraulic relief valve had no leakage, and the parameters of AAK hydraulic
relief valve were the most stable in the 4 factories. At the same time, their
engineers regarded that AAK quality was the most trustworthy.

AAK designs a special CMM detection device according to the structural
characteristics of the valve sleeve, which can analyze and control the
detection error, so as to reduce the impact of the measurement system error on
the measurement accuracy. In the actual manufacturing process, the detection
device can quickly measure the relevant dimensions of the inner cone of each
valve sleeve, realize the full coverage and accurate control of manufacturing
error, and ensure that the final actual manufacturing error of the inner cone
angle is controlled with ± 0.8 °, and the minimum axial grinding tolerance of
the sealing circle is 0.075μm. Thus, each valve can achieve 100% leakage free.

AAK hydraulic relief valve, is not the market common quality, focused on
details, 100% no leakage, you are welcome to give it a try!

https://www.aakindustry.com/info-detai , l/hydraulic-relief-valves-aak139

Click to Enlarge