ACSR Insulated Conductor DN1211 Preformed Dead End

Preformed dead end for OPGW is made of aluminum-clad steel wire or galvanized
steel wire,It is designed as two layers structure consisting of structural
reinforcing rods and dead end component to terminate Optical Ground Wire (OPGW)
.The product grips the OPGW cable to prevent damaging the strand or internal
optical fibers, and the holding strenth is not less than 95%RTS of the OPGW
cable.The ground wire with compression terminal can be provided.During
installation,care should be taken to ensure a successful installation .This
product is intended for use by trained crafts people only.



Model Range of Dia. of Cable Length of Reinforcing Rods (mm) Length of Outer
Rods (mm) Weight(kg) Broken Strength(KN)
Minimum(mm) Maximum(mm)
ONY 0780 7.2 7.8 1400 1000 1.1 70
ONY 0880 7.9 8.8 1400 1000 1.15 70
ONY 1010 8.9 10.1 1400 1000 1.28 70
ONY 1140 10.2 11.4 1540 1120 1.7 90
ONY 1280 11.5 12.8 1620 1200 2.41 112
ONY 1410 12.9 14.1 1660 1240 2.55 112
ONY 1550 14.2 15.5 1840 1360 2.89 112
ONY 1730 15.6 17.3 2000 1480 3.61 112
ONY 1920 17.4 19.2 2400 1800 4.68 112
ONY 2110 19.3 21.1 2600 2000 5.14 112

Click to Enlarge