Automatic Slag Discharge High Precision Cutting Fluid Filtration Machine

1.Scope of application
cutting fluid, tensile emulsion, cold rolling emulsion, semi-synthetic
coolant,
fully synthetic coolant, cleaning fluid.

2.Working principle
When the cutting fluid is sent into the equipment through the oil transfer
pump, when the cutting fluid and impurity particles enter the separation
rotor,
they are subjected to strong centrifugal force (up to 2000 times the gravity
of
the impurity self weight), the cutting fluid and impurities move radially to
the internal surface of the rotor, and the cutting fluid and impurities are
compressed into a thick layer. Due to the different effects of centrifugal
force, the cutting fluid flows back to the transfer tank along the reflux
tank,
and the impurities are adsorbed to the inner surface of the separator and
gradually solidified, so as to separate the impurities from the cutting
fluid
and continuously improve the cleanliness of the cutting fluid.

3.Technical parameters
Model Number:LC-SJ-HWM-G
Scope of application:Water-Based
Filtration Method:Centrifugal Separation
Slag Discharge Mode:Automatic Slag Discharge
Start Mode:Soft Start
Power Supply Data:Three Phase AC 38V 50Hz
Total Power (Kw):48
Control Panel:Siemens Touch Panel
Drum Capacity (L):20
Drum Speed (r/min):11600
Centrifugal Effect:99%
Working Pressure (Mpa):0.4
Working Noise:≤75 dB(A)
Maximum Handling Capacity:6000
Recommended Flow (L/H):6000
Working Temperature For Oil (℃):45
Oil Content After Purification:<5%
Impurity Content In Filtered Oil:<5%
Filtering Accuracy (μm):2
HS Code:8421299090
Equipment Size (mm):1300*950*1700
Package Size (mm)：1480*1080*1750
Net Weight (kg):830
Gross Weight (Kg):880

4.Benefits to customer
1) Under the same conditions, the service life of cutting fluid will be
extended at least twice;
2) Reduce the cost of hazardous waste treatment by at least 75%;
3) Process cutting fluid without shutdown;
4) Prolong the service life of cutter and machine tools;
5) Improve the machining accuracy of workpieces and reduce defective
products;
6) Improve the factories’ environment ,solve the odor problem and reduce
the
turnover rate;
7) Improve environmental protect.

Minimum Order: 1 sets

Click to Enlarge