BMC, SMC, GRP, GFK Roof Tiles

What is gfk material?

Aobang composite roofing tiles is divided into: BMC roofing tiles, SMC roofing
tiles, GRP roof tiles, GFK roofing tiles.

Due to the excellent properties of BMC, SMC, GRP, GFK materials, it is the best
choice for making roof tiles. BMC, SMC, GRP, GFK material is a composite
material, mixed with polyester resin, chemical and mineral fillers, technical
agents, usually reinforced with GFK fiberglass. It is an excellent material GFK
for outdoor applications. It has weather resistance and UV stability and has a
service life of more than 30 years in outdoor environments. It absorbs almost
no moisture, so it can isolate the moisture from the outdoors to the room. It
is water and chemical resistant so acid rain does not affect the surface of the
roof. Colors are easily mixed into the BMC, SMC, GRP, GFK material as a
pigment, so colored tiles can be easily obtained and the color does not
disappear during its lifetime.

BMC, SMC, GRP, GFK materials are also fire resistant. If there is no source of
burning material around it, it will not spread and will immediately go out.
Light weight and high strength are one of the biggest advantages of BMC, SMC,
GRP, GFK materials. As the grp roof supplies, this grp roofing materials has a
density of 1.7-2.0. It makes the tiles very light. Transportation costs,
installation costs, etc. can be reduced. this materials make your roof tiles
more colorful, longer lasting and more cost effective.

Advantage: Light weight, high strength, aging resistance, UV protection, acid
and alkali resistance, waterproof and moisture proof, no fading, low thermal
conductivity and energy saving.
Established in 2010 and located in Chengnan Development Zone, Luoshe Town,
Huzhou City, Zhejiang Province, Zhejiang Aobang Technology Co., Ltd. has
extensive bulk molding compound process and many refined testing laboratories
as a spinal column in the industry. Whether at home or abroad, Zhejiang Aobang
Technology Co., Ltd. can manufacture top quality composite molds with advanced
mold making concept, proprietary application technology and production
technology. By the way, being a high-tech enterprise, it is a fact that this
company enjoys a good fame in the new motor and energy automobile industry in
Hangzhou.

SMC and BMC composite require heating rather than cooling systems. The
temperature of the mold is usually between 130 and 160. It is very important to
keep the temperature of the mold and the exhaust gas when designing the mold.
The mold is easier to fill, the product is not easy to be deformed, and the
surface is better. Commonly used heating systems are steam, oil and electric
heating rods.

Vacuum assisted systems for BMC and SMC molds: Products with Class A surfaces
are usually vacuum-assisted, and the internal cavity and vacuum insulation of
the mold are very important. The mold must have a sensor and a vacuum system to
measure the mold temperature and pressure vacuum. Production SMC and BMC molds
must guarantee high quality, long life and economy. Aobang Technology Co.,
Ltd.'s years of experience in the production of SMC and BMC molds and
proficiency in machine, mold, material and process can ensure the maximum
benefit of customers.

Minimum Order: 1 sets

Click to Enlarge