Custom Aluminum die cast mold service

Custom Aluminum die cast mold service Aluminium Die Casting Manufacturers In
China Aluminum Casting Mold Making

3D and 2D products drawing from customer, the step of mould flow simulation is
necessary. To find any potential defects during casting. For example, some
parts have A surface and B surface request. Particularly for nickel finishing
die casting parts. No any air porosity allowances, many of parts will need
secondly machining. Have air bulb occur after machining. Some parts will have
very strict tolerances in same axle. This time JSCAST CAE software will offer
great solution.in fact all aluminum die casting molds manufactory designer need
advanced CAE software to help their job, not only the experiences. DFM for
customer confirm, the step of raw material quality checking is very important,
particularly the mold core material checking. Now material of H13, SKD61, 8407,
1.2344, DH-31 widespread use in Ningbo die casting mold manufactory. We not
only checking the checking the chemical composition and mechanical property.
The material pure standard also very important for die casting tooling.
Any impurity contain in mold core will caused crack problem after thousands
injection times, rough grinding, milling, and rough CNC machining before heat
treatment. After heat treatment will take precision grinding and precision
machining. In our pressure die casting mould workshop equipped with high
speeding five axle machining center. EDM is widespread use in pressure die
casting tools production. This EDM machines great advantage reduce machining
cost and solved most complicate structure in HPDC dies, the disadvantage will
get corrosion problem. So high standard EDM machines choose is critical. Remove
oxidation material is necessary step after EDM machining. Aluminum injection
tooling cavity polishing. Roughness of cavity also important for pressure die
casting tooling injection times. Polishing direction should same direction with
mold opening.
Perfect mold design is important for mold injection times and superior quality
casting components.
Prevent molten aluminum alloy directly erosion corrosion mold cavity. Over 70%
crack problem caused by part of mold over heating
The injection speed and filling velocity control well when casting gate located
in thick part
For excellent air venting, the parting line better located the end of casting
system
Let air have time escape from mold cavity before moving die and fixed die
closed
Good parting line design should think about how to reduce deburr cost
For strict concentricity casting parts, the products same axle should locate in
one cavity whatever female cavity or male cavity. Meet precision request at
same time highest possible reduce secondly machining cost.

Aluminium casting company began to produce die cast mold according to the
drawings provided by the customer, and through the perfect mold design, our
aluminum alloy die casting can better reduce the cost of burrs.

Goalsure is one of the aluminium die casting manufacturers, with complete
aluminum alloy casting equipment, and we could do aluminum casting mold making
according to drawing，

If you want to customize CNC mold or parts, please click here to leave a
message.

https://www.gsdiecasting.com/< , br>

Minimum Order: 1 pieces

Click to Enlarge