Factory tracking device GPS Tracker 102B

6.2Startup
Put the SIM card and battery to wait the indicator lights up.
Take the tracker outdoors, after 10 to 40 seconds, the device will acquire GSM
/ GPS signals and start to work normally.
6.3Device status light
Status Lost fix to satellites Fix to satellites Good GPS signal (Fix
to more than 4 satellites with a signal-to-noise ratio of more than 38)
GSM Flash one time each second. Quick flash 2 times each second.
Quick flash 3 times each second.
GPRS Flash one time each 3 seconds. Quick flash 2 times each 3 seconds.
Quick flash 3 times each 3 seconds.
No GSM ON ON ON

6.4GPRS configuration for live real-time tracking
Attention:
When reading this user manual, you will notice that we have used "+" and
"space" between some words;"+" between two words means they should be written
together as one word without a space and "space" between two words means you
should leave one character space between two words.

Usually, the device can automatically recognize and select the APN, user name
and password of GPRS settings. If the device cannot connect to the web
platform, then you need to use the mobile phone text message to configure the
settings according to following steps.
6.4.1 Configure APN setting
APN is an abbreviation for Access Point Name and changes depending on which
mobile network you are using. For more information about your local APN, please
check with your local wireless carrier.

SMS command: APN+password+space+local APN
Tracker response: APN OK
Example: APN123456 CMNET

Note: 123456 is the default password, please change password on APP or refers
to 7.1. CMNET is the APN of China mobile.
6.4.2 Configure user name and password of GPRS
In the most countries, the user name and password of GPRS are not necessary;
therefore, you can ignore this step if it is not necessary for your local
network. For those countries requiring user name and password, please configure
as following:

SMS command: up+password+space+user+space+password
Tracker response: user, password ok!
Example: up123456 Jonnes 666666

Note: 123456 means the password of the device, Jonnes means the user name of
gprs, and 666666 means password of gprs, please configure it according to the
user name and password of your local ones, you can check this information with
your local wireless carrier.
6.5Mobile APP
6.5.1 Scan the QR code to download APP

Minimum Order: 10 sets