Genuine Konica Minolta Printhead KM1024LNB 42PL KM1024LNB

KM1024LNBThe Konica Minolta KM1024 LN print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads.

The Konica Minolta KM1024 LN print head is a vast improvement over the KM512 print head series, offering twice the print width and double the level of greyscale. Konica Minolta piezo on-demand inkjet heads are driven using lower voltages than other inkjet heads and the new actuator used in the KM1024 reduces power consumption even further.

The Konica Minolta KM1024 LN print head has 1024 nozzles with a droplet size of 42 pico litre and a native resolution of 360 dpi. The print head is compatible with oil based and solvent inks.

This print head is also known as the Konica Minolta KM1024 LNB. This is Konica original print head and it includes the Head ID and the necessary waveform information. It carries a product warranty.
This Printhead is used for white ink on Agfa printers.

Specifications:

Technology: On-Demand Piezo Electric (Shared Wall 3 Cycle)

Native Resolution: 360 dpi

Cal. Droplet Size: 42 pico litre

Max. Drops in Greyscale: 8 drops

Tot. Amount of Nozzles: 1024 (512 nozzles per line)

Nozzle Spacing: 70.5 microns

Print Width: 72 mm

Firing Frequency: 6.7 kHz

Ink Compatibility: Oil based and Solvent Inks

Heater: not integrated

Minimum Order: 1 pieces

Click to Enlarge