HW™ Controllable Guidewire

Product Features
The PTFE coating on the near surface and the hydrophilic coating on the far end
provide an extremely low coeffcient of friction, good abrasion performance and
excellent bio-compatibility.
The tip end can be shaped and the distal end diameter can be designed to
enhance the guidewire penetration.
Stainless steel core wire has strong braced force, excellent push-ability and
torque conductivity.
Distal polyurethane containing tungsten cladding for excellent development
effect.
A variety of tips flexibility, providing abundant clinicaloptions.
Application Range
0.014in HW™ Controllable Guidewire: The product is intended to facilitate the
placement and exchange of balloon dilatation catheters or other therapeutic
devices during Percutaneous Transluminal Angioplasty(PTA)or other intravascular
interventional procedures. The product is not intended for use in the cerebral
vasculature.
0.018in HW™ Controllable Guidewire: The product can be torqued to facilitate
the selective placement of diagnostic or therapeutic catheters. This device is
intended for peripheral use only, A torque device (pin vise)is included with
each wire to facilitate directional manipulation of the guidewire.
Structure Composition
HW™ Controllable Guidewire is composed of a core wire and coating layer, the
surface of the proximalend is coated with PTFE, the distal end of the
hydrophilic coating, can be equipped with mandrel, torque device.

Click to Enlarge