Kieselguhr DN100 Two Lobe Rotary Pump , Antiwear Positive Displacement Lobe

Product Description


Kieselguhr / Loading And Unloading / Good Wear Resistance / Industrial Lobe
Pump





This pump with Radial Liners is installed in a brewery for loading and
unloading of tank trucks with Kieselguhr. The flange connections have different
nominal diameters at suction and discharge side, adapted to the requirements of
the customer.





Application data:



Medium Kieselguhr
Flow Rate 12 m³/h
Viscosity /
Pump Speed 270 rpm
Temperature 30°C
Pressure 4 - 6 bar
pH value /




Technical data:



Casing GG25
Casing protection plate XAR500 Hardmetal
Static O-rings NBR
Shaft seal single-acting mechanical seal
Rotors tri-lobe screw profile NBR
Drive connection 3 kW




Advantages of this Accuvon AP 100



- loading and unloading of tank trucks

- Self-priming

- Reversible

- positive displacement pumps

- good wear resistance

- over pressure protection

- Resistant to solids

- Ease of maintenance





Rotary Lobe Pumps are self-priming, valveless positive displacement pumps. The
screw rotor enables pulsation free and gentle conveyance, the pump operation is
reversible



The crusher is an effective, widely applicable macerating unit based on the
proven design of the Accuvon Rotary Lobe Pump: one principle, two bestsellers



Waste Processes in the recycling industry demand reliable and robust pump
units.

The wide range of pump sizes, the option loaded modular design and the
peripheral equipment enable Accuvon to supply a suitable Rotary Lobe Pump for
your pump application.



The Accuvon pumps allows the quick and convenient replacement of all fluid
wetted parts without removal of pipes, drives or other components of the pump
unit by your own staff.

Quick - Uncomplicated - Inexpensive. The quick release cover allows simple
access to the inner parts of the pump.



The various, often strongly contaminated liquids in the recycling industry
require individually customized selections of pumps:

Accuvon offers various shaft seals designs and rotor materials with different
coatings (Elastomer, PTFE or Urethane) or solid stainless steel rotors. Casing
protection plates are supplied with various steel, plastic or ceramic
qualities. For additional operation safety the Safety valve for over pressure
protection can be added.





Features of Accuvon Rotary Lobe Pumps:



1.Self-priming, Valve-less, Positive Displacement Pump

2. Easy Maintenance through Front Cover

3. Controllable Flow, Ratio up to 1 : 5

4. Capacity of up to 3200 m³/h

5.Pressures of up to 25 bar

6. Dry-running Capability

7.Reversibility, same pump output for both directions

8. Gentle, Low-Pulsation Pumping

9.For Viscous, Solid, Abrasive or Shea-sensitive Mediums

10. Low Parts Replacement Costs





Components of a Accuvon Rotary Lobe Pump



1 Timing gear

2 Quench and control chamber

3 Casing in block design

4 Unwetted shaft

5 Axial and radial casing protection ( Optional materials from Hardox,
Stainless Steel,Plastic or Ceramic )

6 Shaft seal

7 Rotors

8 Quick-release cover

Kieselguhr DN100 Two Lobe Rotary Pump , Antiwear Positive Displacement Lobe
Pump 0

Click to Enlarge