Molybdenum Mesh Disc

Product Name Molybdenum Mesh Disc
Model MO1>99.95% Molybdenum Rhenium Alloy
Density 10.22 g/cm3
Melting Point 2610 ℃ 
Characteristic
At room temperature, molybdenum mesh is stable in both air and water, and does not
work on hydrochloric acid, hydrofluoric acid, dilute nitric acid, and alkaline
solutions.
2. When used in a vacuum environment, uncoated molybdenum has a very long service
life. Molybdenum is completely stable in pure hydrogen, argon, and helium.
Molybdenum does not undergo a chemical reaction with hydrogen until its melting
temperature. But when molybdenum is heated in hydrogen gas, it can absorb a portion
of the hydrogen gas to form a solid solution. For example, at 1000 ℃, 100 grams of
molybdenum metal can dissolve 0.5 cubic centimeters of hydrogen. The application of
molybdenum mesh in many electric furnaces fully demonstrates this characteristic.
Above 1500 ℃, molybdenum mesh reacts chemically with nitrogen to form nitrides. If
the pressure of nitrogen is very low (about 0.01 mmHg), it cannot be seen even at
2400 ℃. Molybdenum mesh still exhibits considerable properties in carbon dioxide,
ammonia, and nitrogen up to approximately 1100 ℃. At higher temperatures, nitride
films may form on the surface of molybdenum mesh in ammonia and nitrogen gas. At
temperatures above 1100 ℃, it can be carbonized by carbon containing gases such as
hydrocarbons and carbon monoxide.
Application
Molybdenum mesh is widely used in vacuum high-temperature furnace sintering of
neodymium iron boron support mesh, as a connecting component in corrosion-resistant
production, structural components working in high-temperature environments, heating
elements, integrated circuits, gas filtration, aerospace, military and other fields.
 
Contact Information
M.P:+86-13315865785
Email:estrellayue@ofola , n.com
WhatsApp:+86-13315865785 

Minimum Order: 1 pieces

Click to Enlarge