NT CAT DMP-30 CAS: 90-72-2 Tris(dimethylaminomethyl)phenol

NT CAT DMP-30 CAS: 90-72-2 Tris(dimethylaminomethyl)phenol

Overview:
Common Name: Tris(dimethylaminomethyl)phenol
Other Chemical Names:
Tris(dimethylaminomethyl)phenol,2,4,6-;2,4,6-& , lt; ,
br>TRI(DIMETHYLAMINOETHYL)PHENOL;a,a',a , '&# , 39;-
Tris(dimethylamino)mesitol;ProChemicalbook ,
texNX3;TAP(aminophenol);VersamineEH30
;Tris , -(di , methylaminemethyl)phenol;2,4,6-TRIS(DIMETHYLAMINO- , METHYL)PHENOL
MF：C15H27N3O
MW：265.39
, CAS：90-72-2

Typical Properties
Appearance Form: clear, viscous liquid
Colour: light yellow
Initial boiling point and boiling range 130 - 135 °C at 1 hPa - lit.
Flash point 124 °C - closed cup
Vapour density 9,16 - (Air = 1.0)
Relative density 0,969 g/mL at 25 °C
Viscosity 120~250


Features and uses:
NT CAT DMP-30 is a tertiary amine accelerator, commonly used in the production
of epoxy resin and polyurethane products.
NT CAT DMP-30 is commonly used in epoxy resin coatings, adhesives and other
industries to accelerate the reaction in curing agent systems such as
polyamide, polyether amine, anhydride, and reduce the reaction temperature.
NT CAT DMP-30 addition amount accounts for 5-12% of the curing dose.

Storage Information
Recommends that our catalysts be stored in a dry and cool area under
appropriate ventilation conditions. Each container should be closed tightly to
avoid contamination with moisture or other negative influences that could
change the products' performance in the end use. The optimum storage
temperature is between 10 °C and 30 °C. Lower and higher storage temperatures
are not preferable and should be avoided.

Shelf Life: 24 months
Standard Packaging:
200KG Steel Drum
1000KG IBC Drum
(DABCO TMR-30, PC CAT NP30, K54)

Minimum Order: 100 kilograms

Click to Enlarge