OD15mm * W.T2mm * L4500mm Thermic Lance Pipe Daiwa Lance

Product Description:

A Thermic Lance is a steel pipe packed with mixed metal wires. Pure oxygen gas
is passed through the pipe from an oxygen cylinder and regulator. The end of
the pipe is lit with a high temperature source, e.g. an oxy-acetylene torch.
The iron in the steel burns in the oxygen coming down the pipe to produce
enormous heat and a liquid slag of iron oxides and other materials, which
dribbles and splashes out.

The temperature reached in the centre of the combustion zone is approx. 4000
degrees Celsius, greater than the melting point of any substance on earth. By
the way of comparison, concrete melts at 1800 - 2500 degrees Celsius and steel
at less than 1500 degrees Celsius.


A Thermic Lance is capable of cutting through :

All ferrous and non-ferrous metals (recommended)
Refractory materials such as linings and bricks (recommended)
Underwater cutting of metal tracks, bridge supports (recommended)
Concrete or rock structures (mainly for piercing holes only)


Cutting large metal castings or frozen metal spills
When foundries have large spillages of molten material, the only method to
clean up is to use 16mm to 19mm Thermic Lances once material has solidified.

Cutting mixed or laminated materials
Combinations of metal and concrete are notoriously difficult to cut since the
techniques for metal (drilling and oxy-cutting) are not compatible with those
for concrete (drilling with tungsten carbide or diamond tipped tools and jack
hammering). A lance will cut through both materials with ease at the same time.

Concrete cancer in reinforced concrete
A mini lance can be used to remove concrete cancer in coastal buildings and
then re-packed with suitable new material.

Emergency situations
Widely used in emergency work around the world for disasters such as collapsed
buildings due to earthquakes or train derailments etc.

Removing plugs, pins and hard-facing material
A Mini Thermic Lance is particularly effective when it comes to removing worn
or seized pins in earthmoving equipment. It can also be used as a gouger to
remove welds to replace teeth on buckets.

Furnace applications
Electric-arc and Blast furnaces have plugs which must be opened at regular
intervals for inspection or draining purposes. Lances are also used for removal
of worn refractory material and cleaning/de-slagging of pouring spouts.

General use
Cutting Large objects for scrap, cutting large steel beams in demolition and
renovation, removing awkward objects from buildings (e.g. large statues, old
bank vaults) and general maintenance applications.

Supply range:
1. Outer Diameter: From 9.5mm - 26.7mm for your choice
2. Length: From 1 meters to 5 meters (customized)
3. Coating: 0.8mm -3mm  (customized)

Contact :cici[@]jsxrgy.com
Website :https://www.metallurgicalchina.com

Minimum Order: 1000 pieces

Click to Enlarge