PU Foam Silicone Stabilizer

SiSiB develops and manufactures a full line of high-quality silicone oil
surfactant for formulating polyurethane rigid foams, flexible foams, high
resilience foams, shoe sole foams and one component foam.

SiSiB develops and manufactures a full line of high-quality silicone
surfactants for polyurethane foam.
Our silicone oil surfactants products are used for a variety of polyurethane
applications: rigid foams, flexible foams, high resilience foams, shoe sole
foams, one component foam, etc.
SiSiB, a reliable silane manufacturer, is responsive and flexible in
formulating and manufacturing to satisfy customers’ unique requirements. Our
extensive network of reactors allows us to support our customers from project
inception, to scale-up, through commercial success.
SiSiB Silicone Surfactant for PU foams are grafted copolymers which consist of
a polydimethylsiloxane backbone and polyethylene oxide-co-propylene oxide
pendant groups. It is used as surfactants to stabilize the foam cells in the
flexible polyurethane foaming process. It increases the compatibility of raw
materials, decrease surface tension in polyurethane foam systems, improve
emulsification and nucleation, prevent coalescence and stabilize cell
membranes.

PU Foam Silicone Stabilizer Recommendations

ADDSiL™ 11030
ADDSiL™ 11030 surfactant is a non-hydrolysable silicone glycol copolymer for
manufacturing of rigid polyurethane foams. It is designed for Pentane and HCFC-
141b blown polyurethane foams, it provides good nucleation and excellent flow
ability.

ADDSiL™ 11050
ADDSiL™ 11050 surfactant is a non-hydrolysable silicone glycol copolymer for
manufacturing of rigid polyurethane foams. It is a general-purpose foam
stabilizer used for the production of polyurethane rigid foam plastic, and it
is used in both hydrocarbons (cyclopentane), HCFC 141b and high water content
foaming system.

ADDSiL™ 11060
ADDSiL™ 11060 silicone surfactant is a non-hydrolysable polyether
polydimethylsiloxane copolymer. It is mainly used for manufacturing polyester
polyurethane and polyether polyurethane rigid foam plastic, and is a foam
stabilizer for PIR foaming process.

ADDSiL™ 11080
ADDSiL™ 11080 silicone surfactant is a non-hydrolytic polyether
polydimethylsiloxane copolymer. It is an excellent candidate to consider for
both continuous and discontinuous applications. It is designed for HFC-365/227
and the mixture blown polyurethane foams; it provides low thermal
conductivities.

ADDSiL™ 11090
ADDSiL™ 11090 silicone surfactant is a non-hydrolytic polyether
polydimethylsiloxane copolymer. It is designed for HFC-245fa and the mixture
blown polyurethane foams; it provides low thermal conductivities.

ADDSiL™ 11200
ADDSiL™ 11200 silicone surfactant is a non-hydrolytic polyether
polydimethylsiloxane copolymer. It is designed for iso-cyclopentane blown
polyurethane foams; it provides good nucleation and excellent flow ability.

ADDSiL™ 11210
ADDSiL™ 11210 silicone surfactant is a non-hydrolytic polyether
polydimethylsiloxane copolymer with high activity. It is designed for HCFC-141b
blown polyurethane foams, it provides ideal balance of processing and
performance properties.

ADDSiL™ 11220
ADDSiL™ 11220 silicone surfactant is a non-hydrolytic polyether
polydimethylsiloxane copolymer with high activity. It is designed for HCFC-141b
and cyclopentane blown polyurethane foams; it provides strong nucleation and
low thermal conductivity.

ADDSiL™ 11280
ADDSiL™ 11280 silicone surfactant is a non-hydrolytic polyether
polydimethylsiloxane copolymer with high activity. It is designed for water and
pentane blown polyurethane foams; it provides excellent emulsion stability and
voids reduction.

ADDSiL™ 11300
ADDSiL™ 11300 silicone surfactant is a non-hydrolytic polyether
polydimethylsiloxane copolymer. It is designed for pentane blown polyurethane
foams. ADDSiL™ 11300 provides low thermal conductivities and it is an excellent
candidate for insulating appliance and PIR/PUR formulations.

ADDSiL™ 11320
ADDSiL™ 11320 surfactant is a non-hydrolysable silicone glycol copolymer for
manufacturing of rigid polyurethane foams. It is designed for HCFC-141b and
Pentane blown polyurethane foams.

ADDSiL™ 11600
ADDSiL™ 11600 surfactant is a non-hydrolysable polyether polydimethylsiloxane
copolymer. It is designed for polyurethane foaming system with HFCs/HFOs
blowing agent. It is also suitable for some mixture blowing agents like LBA/CP.

ADDSiL™ 11630
ADDSiL™ 11630 surfactant is a non-hydrolysable polyether polydimethylsiloxane
copolymer. It is designed for rigid polyurethane foaming system with blowing
agents like 245 /Cyclopentane /LBA/Ecomate, as well as some mixture blown
agents like LBA/CP.

ADDSiL™ 11720
ADDSiL™ 11720 surfactant is a non-hydrolytic, isocyanate-compatible foam
stabilizer with high activity. It is a copolymer of polysiloxane and polyether
which mainly used for the production of polyurethane rigid foam plastic.

ADDSiL™ 11800
ADDSiL™ 11800 silicone surfactant is an organosilicone copolymer designed for
use in the manufacture of rigid polyurethane foams. It can provide very
efficient emulsification in insulation foams, such as in refrigerators and cold
storage applications.

ADDSiL™ 11820
ADDSiL™ 11820 surfactant is a non-hydrolysable polyether polydimethylsiloxane
copolymer. It is designed for polyurethane foaming system with pentane blowing
agent.

ADDSiL™ 12250
ADDSiL™ 12250 surfactant is a silicone stabilizer. It is designed for cold-cure
flexible molded MDI and MDI/TDI polyurethane foams.

ADDSiL™ 12360
ADDSiL™ 12360 surfactant is a silicone stabilizer. It is designed for cold-cure
flexible molded TDI polyurethane foams.

ADDSiL™ 12550
ADDSiL™ 12550 is a silicone surfactants. It is designed for high resilience
slabstock foam. It is a versatile and reliable for all formulations
predominantly based on TDI 70+.

ADDSiL™ 12560
ADDSiL™ 12560 is a moderately active silicone surfactant for regulation and
stabilization of the cell structure in high resilience molded polyurethane
foams based on based on TDI 50 ~ TDI 70.

ADDSiL™ 12850
ADDSiL™ 12850 surfactant is a silicone foam stabilizer. It is designed for
cold-cure flexible molded MDI and MDI/TDI polyurethane foams.

ADDSiL™ 13288
ADDSiL™ 13288 is a silicone surfactant provide broad latitude in all grades of
conventional flexible foams, including those of very low density where high
loading with auxiliary blowing agents act to...

Minimum Order: 1 kilograms

Click to Enlarge