Industrial Machinery & Equipment

Fluorescence biological microscope MF23 takes use of Olympus CX23 biological microscope as main body, and MSHOT self designed LED fluorescence attachment come into being a favorable epi-fluorescence microscope for lab working. Working with trinocular head the microscope is ideal for both of eyepiece view and photography on PC. The microscope is popular sued at clinical centers and university labs, used to observe cells, tissues, bacteria of bright field and immunofluorescence observation methods. Features Olympus CX23 body and lens, high quality Cost effective with trinocular observation head of triple beam split 0/50%/100% Modular fluorescence attachment of various of LED light source and fluorescence filters Can choose digital screen to show and remember fluorescence light intensity Applications Botany Education Clinical Immunofluorescen , ce Tuberculosis sputum slide quick diagnose Skin and foot fungus diagnose Respiratory disease diagnose Water quality detection Food safety control Coating material analysis Various of fluorescence dyes

Minimum Order: 1 bags

MF31 series fluorescence microscope adopting excellent quality infinity optical system combined with LED fluorescence illuminator. The LED fluorescence system is modular design, does not need external power box, it can offer blue, green and UV fluorescence excitation groups. Digital screen shows and remember each fluorescence channel light intensity. The microscope is good for entry level fluorescence observation such as immunofluorescence and bio-fluorescence, and bright field of biological slide. It is easy to operate, environment protect and high safety, widely used at school, university lab, medical center and science research institute. Users can chose different models based on fluorescence channels. Features Microscope works for bright field and fluorescence. 100% light division for view in eyepiece and camera imaging. Eyepiece has 22mm wide field of view and high eyepoint. Excitation wavelength covers 330nm~580nm. Configuration is available of three different fluorescence channels. Each group of fluorescence cube is lighted by 3W LED lamp. Slide holder can hold double pieces slides at one time. Instant ON/OFF without preheating or cooling. No requirement of external power box or lamp box. Flexible expanding functions to polarization, white LED epi-illluminating and heating.

Minimum Order: 1 bags

10 20 30 40 Inch PP Melt Blown Filter Cartridge sediment filter 1micron 5 micron General Description Lyuan pp melt blown filter cartridge series is a kind of standard and simple filter cartridge for water purification. It is fusing and intertwined of polypropylene fiber without any chemical glues. It is made of 100% pure polypropylene raw material. this filter cartridge are radom to form 3D micro pore which will make the cartridge 3 layers with fine fibers in surface and coarse fiber and deep filtration. As the fiber and density from high filtration rating and pollutants holding capacity on diameter of filter cartridge, low pressure drop, gradual changing deep filtration strcture with losse outside and close inner, strong polluctants holding capacity, it can remove contaminant effectively, such as suspended substance, particulate and rust, providing efficient filtration and long serivce life. Filter media material PP Code DOE Surface Glossy inner diameter 28 mm outer diameter 63mm length 10 inch max.differential pressure 3.5 bar at 20℃ max. operating temperature 82℃ Replacement differential pressure 1-1.5bar

Processing description: The oil smelting equipment produced by our company is designed and manufactured according to the actual needs of domestic slaughtering industry to convert animal fat into edible oil, drawing on international advanced technology and combining our own actual experience. The main processes are high temperature horizontal smelting and low temperature vacuum drying production. The method is to sterilize animal fat and convert it into edible oil. The whole process adopts fully enclosed production. The gas generated in the production process can be discharged to the standard after multi-stage treatment, which is efficient, environmentally friendly and energy-saving. material stainless steel power 55kw

Prefab clean room is a special designed room to exclude the particles in the air, bacteria and other harmful air pollutants, and the indoor temperature, cleanliness, interior pressure, air velocity and air distribution, noise, vibration, and lighting, static control within the scope of a certain demand. That is no matter how the outside air conditions change, its indoor all can maintain the original set requirements of cleanliness, temperature and humidity and pressure performance characteristic. Level Of Airborne Particulate Cleanliness In Prefab Cleanroom Level Maximum Particles/m3 Equivalent　 　 ≥0.1 μm ≥0.2 μm ≥0.3 μm ≥0.5 μm ≥1 μm ≥5 μm ISO 1 10b d d d d e 　 ISO 2 100 24b 10b d d e 　 ISO 3 1000 237 102 35b d e Class 1 ISO 4 10000 2370 1020 352 83b e Class 10 ISO 5 100000 23700 10200 3520 832 d,e,f Class 100 ISO 6 1000000 237000 102000 35200 8320 293 Class 1,000 ISO 7 c c c 352000 83200 2930 Class 10,000 ISO 8 c c c 3520000 832000 29300 Class 100,000 ISO 9 c c c 35200000 8320000 293000 Room Air

Product Description Commercial Scent Delivery System Large Area HVAC Aroma Oil Diffusion Features 【Stable Quality】Made by aluminium material, with stable quality and high-end appearance. 【Scent Delivery System】Model SE5000 is specially designed for scent solutions for enormous public areas. The powerful air pumps and large bottle capacity can fulfill the large area scent diffusion demands. 【Twin-Fluid Atomization】Industry-leading professional twin-fluid atomization (air pump nebulization) technology helps fragrance molecules diffused evenly into a wide-range room. 【Suitable For HVAC】The nozzle of the nebulizer is designed to be able to connect the HVAC system, which helps aroma molecules fastly and evenly diffused and covered a large public area, for example, transport station, hotel lobby, hall, etc. More Details Brand: SCENTA Model: SE50 , 00 Product Size: 255x157x153 mm Material: Aluminium Voltag , e: DC 12V Working Power: 25W Core Technology: Air Pump Nebulization OEM/ODM: Available, need negotiation.

2 RT Rubber plate vulcanzing press machine

BHJG400 bucking machine has six parts: power tong、backup tong、hydraulic system、pneumatic system、operation panel and machine bed. TTRIBUTE Color: White Green Material: Carbon Steel Standard: API Industries: Energy & Mining Machinery Application: Casing Tubing Petroleum PRODUCT DESCRIPTION BHJG400 bucking machine has six parts: power tong、backup tong、hydraulic system、pneumatic system、operation panel and machine bed. The power tong driven by hydraulic motor is used to make up or break out the couplings. The backup tong driven by pneumatic cylinder is used to fix the pipe. the make up torque is output by a tension sensor fixed on the bottom of the backup tong and controlled & displayed by the computer. This machine is applicable for 5″-9 5/8″diameter casing and tubing, the jaw plate includes: 5″、5 1/2″、6 5/8″、7″、7 5/8″、8 5/8″、9 5/8″, other sizes need to be ordered. PRODUCT APPLICATION BHJG400 bucking machine produced by our company is a special equipment used to make up or break out the coupling and pipe(casing) in the production line. More information please click here. FEATURES 1. The bucking machine is driven and controlled by hydraulic and pneumatic system, the system is easy and convenient to operate. 2. The other system is controlled by pneumatic except the power tong which driven by hydraulic motor, it can greatly reduce the oil leakage. 3. The power tong uses closed-form structure, it is driven by hydraulic motor, there is 3 jaw plates with 120°distributing, every jaw plate has 2-4 dies, totally 6-12 dies contacting the coupling surface to make the clamping reliable, the die marks are according to API standard, the clamp head can reset automatically and quick. 4. The structure and clamping principle of backup tong is the same to the power tong except it is driven by pneumatic cylinder. 5. It is easy to replace the dies. 6. A tension sensor fixed on the backup tong measures the torque (the unit is ft/lbs). The control system will contrast the torque and turns to the setted value, and control the whole working automatically. 7.Double pumps oil supply, speed change automatically, quick make up and slow torque on, to meet the premium connections. Model BHJG400 Bore diameter 400mm The applicable steel grade H40, J55, K55, N80, L80, C90, C95, P110 and Q125. Application 5″-9 5/8″ Applicable connections API (round / buttress) & premium connections(TS3SB, VAM, BDS, SEC, AB, ANTARES, T Blue, etc). Rotation speed A 45 Kw motor controlled by a transducer drives the HY125P04 plunger pump and the fan cooling hydraulic power to control the speed changing stepless, rotating head speed is : 1-14r/min(high gear), 1-7 r/min(low gear). Max.Make up torque 75000ft.lbs at 20Mpa Torque accuracy ≤3120N.m : ±5% 3120N.m≤torque ≤7800N.m : ±156N.m ≥7800N.m : ±2% Turns resolution 1/1000 Hydraulic system Max.pressure 20MPa Flow rate 40-320L/min Pneumatic control system Working pressure 0.4-0.8Mpa Height of center 1100mm Stroke of the moving cylinder 300mm Dimensions Main machine 3mx1.4mx1.8m Hydraulic unit 1.7mX1.7mX1.7m Control cabinet 1.8mx0.6mx1.6m Machine weight 6T OUR SERVICES 1. Best quality 2. Fast delivery 3. Professional technical support 4. We have been 15 years of experience in export sales. 5. We are machine reputable manufacturer, and also have after sales service. FAQ Q1. What about the payment? A1: We accept L/C, T/T, D/P and Western Union payment terms. Q2. Can you provide on-site installation and training for the machine? A2: Yes, In special cases, we can provide installation, commissioning and training will guide your employees remotely via video. Q3. How about your price? A3: Please send me about what is your detailed request information, we will give you competitive prices in China. Q4. What's your warranty terms? A4: The machine for one year warranty from the date of commissioning.

Minimum Order: 1 bags

BHJG230 torque machine has six parts: driving clamp system、backup clamp system、hydraulic system、pneumatic system、manipulating platform and frame base. Color: White Green Material: Carbon Steel Standard: API Industries: Energy & Mining Machinery Application: Casing Tubing Petroleum PRODUCT DESCRIPTION BHJG230 torque machine has six parts: driving clamp system、backup clamp system、hydraulic system、pneumatic system、manipulating platform and frame base. The Driving clamp is driven by hydraulic motor and it is used to screw on and tighten (screw off) the coupling. The Buckup clamp is driven by pneumatic cylinder and it is used to fix the pipe. the screw on torque value is output by tension sensor and controlled by PLC system. This machine can finish the work of 2″-7″diameter casing and tubing, the jaw plate includes: 2 3/8″— 2 7/8″— 3 1/2″— 41/2″—51/2″—7", other sizes need to buy. PRODUCT APPLICATION BHJG230 torque machine produced by our company is special equipment used to screw on and off the coupling and pipe(tubing & casing). FEATURES 1. BHJG230 torque machine is driven and controlled by hydraulic and pneumatic system, the system is easy and convenient to operate. 2. The system is controlled by hydromantic except for the driving clamp which driven by hydraulic motor, it can greatly reduce the oil leakage. 3. The Driving clamp uses closed structure, it is driven by hydraulic motor, the clamp head has 3 jaw plates with 120º distributing, every jaw plate has 2- 3tooth, totally 6-9 tooth contacting the coupling surface, the teeth marks are according to API standard, the clamp head can reset automatically. 4. Back up clamp is similar to the driving clamp, but it is driven by the pneumatic cylinder .The driving clamp and backup clamp can regulate their center in one line automatically to meet the requirements of using. 5. It is easy to replace the dies 6. The backup clamp is equipped with tension sensor used to measure torque (the unit is KN.m). The control system will contrast the torque value and screw circles with the setting value, control the machine operating automatically. 7. Double pumps oil supply, adjust speed automatically, high speed screw, low speed torque, to meet the demand of special threads. Please feel free to contact us if you need. Model BHJG230 Bore diameter 230mm The applicable steel grade H40, J55, K55, N80, L80, C90, C95, P110 and Q125. Application 2″-7″ Applicable connections API (round / buttress) threads or special thread(TS3SB, VAM, BDS, SEC, AB, ANTARES, T Blue, etc) Variable speed range Take double-pump as power, and the speed is stepless changed manually.The rotate speed of driving clamp:0.7-24r/min. Max.screwing torque:30KN.M(when pressure is 16Mpa ). Hydraulic system Max.pressure 16MPa Flow rate 10-180L/min Pneumatic control system Working pressure 0.4-0.8Mpa Height of center 1100mm Stroke of the moving cylinder 300mm Dimensions Main machine 3000mm×1350mm×1650mm Hydraulic unit 2200mm×2050mm×1400mm Control cabinet 1000mm×660mm×1020mm   OUR SERVICES 1. Best quality 2. Fast delivery 3. Professional technical support 4. We have been 15 years of experience in export sales. 5. We are machine reputable manufacturer, and also have after sales service. FAQ Q1. What about the payment? A1: We accept L/C, T/T, D/P and Western Union payment terms. Q2. Can you provide on-site installation and training for the machine? A2: Yes, In special cases, we can provide installation, commissioning and training will guide your employees remotely via video. Q3. How about your price? A3: Please send me about what is your detailed request information, we will give you competitive prices in China. Q4. What's your warranty terms? A4: The machine for one year warranty from the date of commissioning.

Minimum Order: 1 bags

QK1313 CNC pipe thread lathe can process all kinds of thread precisely, can cut Metric and British cylindrical and conical pipe threads, and can realize the function of CNC lathe. ATTRIBUTE Color: Black Gray White Material: Cast Iron Standard: API Industries: Machinery Application: Casing Tubing Petroleum https://www.lzbhmachine.com/products/ , qk1313-cnc-pipe-threading-machine.html PROD , UCT DESCRIPTION QK1313 CNC pipe thread lathe can process all kinds of thread precisely, can cut Metric and British cylindrical and conical pipe threads, and can realize the function of CNC lathe. It is suitable for processing tubing, casing and drill pipe in petroleum, metallurgy, chemical industry, water and electricity, geology and other departments. PRODUCT APPLICATION This machine is suitable for processing all kinds of oil casing parts, pipe coupling parts, drill pipe joints and all kinds of large diameter, super long and only need to process one end of the various parts. The machine can complete turning of outer circle, inner hole, and all kinds of thread, arc, conical and rotary body inner and outer surface. It is suitable for high efficiency, large quantity and high precision processing of oil casing and drill pipe joints and other ultra-long rotating parts in petroleum industry. MACHINE PERFORMANCE AND CHARACTERISTICS 1. Mechanical, electrical, hydraulic integration and modular design, reasonable layout, compact structure, pleasant operation, convenient maintenance. 2. The machine adopts horizontal bed, mountain line - plane bed, resin sand casting process, reasonable internal rib layout, wide guide surface, high overall rigidity of the bed. It has the characteristics of fast processing speed and high processing precision. 3. The ball screw with C3 level precision leadscrew, dustproof silk mother, longitudinal and transverse feed servo motor directly connected to ball screw through the coupling, ball screw support way, using an end fixed end this way of support can make the screw end it can extend freedom, in order to avoid the work due to temperature increase during the process of screw elongation, In order to compensate for the elongation of the lead screw caused by the rise of the working temperature and ensure the positioning accuracy of the lead screw and the rigidity of the ball screw system, the lead screw is pre-stretched and pre-tightened according to a certain thermal elongation before assembly to eliminate the influence of temperature rise on the accuracy. 4. The sliding parts of the machine should have automatic lubrication device. The machine protection is safe, reliable and effective. 5. Vertical four-station electric tool rest, repeated positioning accuracy of ±0.003mm. Maximum main cutting moment is 3300Nm, maximum output torque is 1250Nm, suitable for heavy cutting. 6. Chuck self-centering three-jaw chuck of park brand, double chuck structure before and after the main shaft, convenient and reliable loading and unloading, can distribute material, reduce the labor intensity of the operator. 7. Screw and guide rail adopt centralized quantitative automatic lubrication device, lubrication is fully reliable, lubrication cycle automatic control. 8. Cooling and chip removal system: the machine adopts full guide rail protection form, chip removal is convenient, and the main cooling box is separated, to ensure the accuracy of machine from the impact of cutting heat. The cooling pump with large flow and high head can get strong cutting cleaning and cooling effect. In the turning process, the workpiece and the tool are fully cooled to ensure the machining accuracy of the workpiece and improve the service life of the tool. 9. No water leakage, oil leakage, abnormal noise phenomenon, closed protection, machine water separation design, easy to use, operation, maintenance, beautiful appearance, excellent after-sales service. 10. The measuring units of all parts, components and various instruments of the machine adopt international standards. Item Unit QK1313 NC System   Standard configuration: GSK980TC3 Optional configuration: FANUC 0i Mate Td; FANUC 0i Td ;SIMENS 808D;KND K1000Ti;GSK980TDC Max dia.swing over bed mm 630 Max dia.swing over cross slide mm 330 Max.length of work-piece mm 1500 Width of bed mm 550 Spindle bore mm 135 Power of spindle motor Kw 11 Mode of spindle speed   Two gears, smooth adjustment Range of spindle speed r/min L: 0-130 H: 130-800 Max.traverse of X/Z mm X: 350 Z: 1250 X/Z rapid traverse mm/min 4000 X-axis motor Speed r/min 1500 Torque N.m 10 Power Kw 1.5 Speed r/min 1500 Z-axis motor Torque N.m 15 Power Kw 2.3 Tailstock quill Diameter mm 100 Travel mm 250 Taper   Morse NO.5 Electric tool-post Model   HAK-21240 No.of tool stations   Vertical four-station Dimension mm 240×240 Turret indexing time S 2.6 Chuck   K11-380 three jaw chuck Positioning accuracy mm 0.020 Repositioning accuracy mm 0.01 Overall dimensions(L*W*H) mm 3700×1755×1800 Machine weight T 4   USTOMERS As a professional high quality CNC pipe threading machine manufacturer, Liuzhou Biaohuang Machinery Equipment Co., Ltd. has best experience for export sales the high quality CNC pipe threading machine sold to America, Dubai, Saudi Arabia, Yemen, Egypt, Indonesia, Vietnam, Malaysia, Singapore, Thailand and Africa etc. Please contact with us if have any requirement, more information and product video will be offered for your reference. OUR SERVICES 1. Best quality 2. Fast delivery 3. Professional technical support 4. We have been 15 years of experience in export sales. 5. We are machine reputable manufacturer, and also have after sales service. FAQ Q1. What about the payment? A1: We accept L/C, T/T, D/P and Western Union payment terms. Q2. Can you provide on-site installation and training for the machine? A2: Yes, In special cases, we can provide installation, commissioning and training will guide your employees remotely via video. Q3. How about your price? A3: Please send me about what is your detailed request information, we will give you competitive prices in China. Q4. What's your warranty terms? A4: The machine for one year warranty from the date of commissioning. Q5. Can you do customized product? A5: Yes, we can. Our professional design team can meet all requirement as customer needs.

Minimum Order: 1 bags

Welding wire for construction machinery Specification ISO G69 4 M21 ZMn3NiMo AWS ER110S-G GB ER76-G Shieding Gas 80%Ar + 20%CO2 Characteristics： (1) This product is the 800MPa grade high strength steel wire, it has very good mechanical properties.  (2) With the mixed shielding gas,this wire can be used to welding the important corresponding level structures. Precautions： 1. Pay attention to the gas purity and mixture ratio.  2. Keep the gas flow rate between 15 ~ 25 L / Min.  3. The extension length keep between 15 to 20mm   4. Clear the oil, rust, moisture, dust and other debris of the welded parts.  5. Keep the welding hood clean and unobstructed. One chemical composition of the weld metal sample (wt%)  （Shielding Gas:80%Ar+20%CO2） C Si Mn P S Else 0.07 0.50 1.52 0.008 0.005 -- One mechanical properties of the weld metal sample  （Shielding Gas:80%Ar+20%CO2） Tensild Strength      MPa Yield Strength      MPa Elongation      % Impact Energy Value ℃ J 835 760 23 -20 95 The applicable current range and specifications of the product (DC+): Dia (mm) 1.2 1.4 1.6 Current Range    (Amp) Flat /Flat fillet welding 200 ~ 350 250 ~ 450 300 ~ 550 Horizontal welding 200 ~ 320 250 ~ 400 300 ~ 450 Hebei XINYU Welding Co., Ltd, which mainly produces high strength steel welding wire, Non-copper-coated solid wire, submerged arc & stainless steel welding wire . Click here to visit our factory.

Minimum Order: 10 long tons

Ozone is a pale blue gas with a distinctively pungent smell. Ozone gas is a powerful oxidant and has many industrial and consumer applications related to oxidation. This same high oxidising potential, however, causes ozone to damage mucous and respiratory tissues in animals, and also tissues in plants, above concentrations of about 100 ppb. This makes ozone a potent respiratory hazard and pollutant near ground level. Ozone gas odour is sharp, reminiscent of chlorine, and detectable by many people at concentrations of as little as 10ppb in air.

Features of 10x50 Binoculars Blue Lens ● 10x High Magnification ● 50mm Large Objective lens ● Multi-Coated Optics ● Fold down eye cups ● Center Focus Knob ● Porro Prism ● Includes lens covers, Neck Strap and Soft Carrying Case ● Close Focus (ft/m) 33/10 ● Eye Relief 20 mm ● Exit Pupil 5.00mm ● Field of View (ft@1000yds/m@1000m) 324/108

LiDAR Scanning System with HESAI XT Laser Sensor Mounted on DJI M600 Pro gAirHawk GS-130X is a kind of short-range, compact LiDAR point cloud data acquisition system, integrated HESAI XT laser scanner, GNSS and IMU positioning and attitude determination system, and storage control unit, is able to real- time, dynamically, massively collect high-precision point cloud data and rich image information. It is widely used in the acquisition of 3D spatial information in surveying, electricity, forestry, agriculture, land planning.