Advertising Equipment

EXC-CU30 series products are with a narrow aluminum-profile housing and specially designed by EXC for outdoor landscape lighting. SMD liner light source, width only 30mm. They can be used for extra-large area display of building facades, contour shaping, interior and exterior surface decoration lighting, and small- range wall washing.

Minimum Order: 1 bags

EXC-W52H product is a high-strength aluminum alloy shell, strip-shaped high-power wall washer designed specifically for outdoor landscape lighting, stages, etc.; various lengths of lamps and lanterns are optional.

Minimum Order: 1 bags

The EXC-W42B full-color controllable series is a high-strength aluminum alloy shell specially designed for outdoor landscape lighting by EXC-LED. It is a strip full-color high-power wall washer light light. Each lamp is an independent pixel, and each pixel can be realized 65536-level gray scale changes; it can be used to color specific lighting areas or landscapes, building facades, bridges, stages, etc.; the length of the lamps can be provided in a variety of specifications.

Minimum Order: 1 bags

The 2HXX series precision china glass syringe is independently developed by Keyto and its main function is to achieve aspiration and dispensing with precise dosing. The syringe has a very high repeatability precision(CV) and accuracy of aspiration and dispensing. Its service life is up to 400,000 cycles of full strokes for Teflon (PTFE) pistons and up to 800,000 cycles of full strokes for UHMWPE pistons without compromising repeatability precision(CV) and accuracy. Specifications of Glass Syringes 30 mm Displacement 100μL 250μL 500μL 1ml 2.5ml 5ml Syringe end size/mm 11 11 11 11 14.5 19 Syringe orifice size/mm 0.6 0.8 0.8 1.9 1.9 1.9 Syringe thrust / N Teflon(PTFE) 14 14 16 16 27 27 (Max) UHMWPE 23 23 27 27 32 36 Accuracy 1% Plunger connection XC Life cycle Teflon(PTFE)：400,000 cycles full stroke UHMWPE：800,000 cycles full stroke Notes. 1. Aspiration and dispensing CV/accuracy are measured using deionized water at 10% of the total displacement. 2. The test environment is 21-25°C static wind environment. 3. The above syringe life cycle is measured under ideal conditions, the actual life cycles depend on the operating conditions. 60 mm Displacement 100μL 250μL 500μL 1ml 2.5ml 5ml 10ml Syringe end size/mm 10.2 10.2 10.2 10.2 12.7 15.3 19 Syringe orifice size/mm 0.8 1 2 2 2 2 2 Syringe thrust / N Teflon(PTFE) 14 14 14 16 18 27 27 (Max) UHMWPE 23 23 23 27 32 32 36 Accuracy 1% Plunger connection XL Life cycle Teflon(PTFE)：400,000 cycles full stroke UHMWPE：800,000 cycles full stroke Notes. 1. Aspiration and dispensing accuracy are measured using deionized water at 10% of the total displacement. 2. The test environment is 21-25°C static wind environment. 3. The above syringe life cycle is measured under ideal conditions, the actual life cycles depend on the actual operating conditions. 4. 60mm stroke Teflon (PTFE) glass syringes are not available in 100μL zero dead volume. 5. 60mm stroke UHMWPE glass syringes are not available in 100μL or 250μL zero dead volume. Note: Please kindly reach out to our sales team for design and specification final clarification and confirmation. Reasons to Buy Keyto Glass Syringes 01 Available in a wide range of syringe volumes Available in a wide range of syringe volumes: 100μL~10mL. 02 Extremely high and consistent metering precision and accuracy Extremely high and consistent metering precision and accuracy over the life cycle. 03 Maintenance-free Advanc , ed borosilicate glass machining technology, rigorous inspection procedures, and unique sealing solutions to ensure maintenance-free over the life cycle of the glass syringes. 04 Good chemical resistance and high wear resistance Good chemical resistance and high wear resistance of the materials of the components in contact with the reagents. Ensures that no replacement components are required during the life cycle. 05 Use of medical grade lubricant Use of medical grade lubricant GESF96. 06 Maximum working pressure Maximum working pressure: 0.3 MPa. As a china glass syringe distributor, we can offer kinds of glass syringes for sale, and the glass syringe price is low, if you have needs to buy glass syringe, please contact us. More kinds of miniature solenoid valves for medical devices, please visit our website.

Sibai made many kinds of customized nuts. We customize nuts according to drawing requirements. We produce the thread according to various standard Sibai Custom made nuts Features Sibai made many kinds of customized nuts. Nut is a necessary part of all manufacturing machinery. There are many kinds of nuts from different materials. Nuts are generally made from different material, such as carbon steel, stainless steel, non-ferrous metal (such as copper) and poly materials. Each type of nut has a different specification, and each type of screw has its own mechanical properties and functions. Sibai’s customized special nuts are used for many industries, such as automotive industry, compressor, construction machinery, wind power equipment, agricultural machinery, casting industry, drilling equipment, shipbuilding industry, rail transit and transmission systems and other industries. We custom lock nuts according to drawing requirements. We produce the thread according to various standard. We are a factory in Dongguan, China, started professional production of hardware in 2006. Sibai’s production is based entirely on drawing accuracy, assembly measurement, testing function and strict quality. We specialize in CNC turning, CNC Milling, CNC grinding machining services for more than 16 years! Our factory passed ISO9001 certification. Sibai is equipped with CNC verticle lathe, CNC lathe, CNC machining center and other CNC machining equipments, as well as machinery devices for cutting, milling, grinding, fine boring and large-scale drilling. The materials we use are optimal. Materials can be aluminum, stainless steel, brass, copper, POM, PVC, etc. Sibai provides high grade material, Non-pollution for products, high standard surface treatment, and surface without burrs. Sibai’s defect rate on the nut products is less than 0.7%. We have our own enterprise culture, With the joint efforts of all the staff, the output value of our company increases year by year. Our company has established long-term business relationships with a number of European customers. We make many different types high precision CNC machining parts for them every year. If you need nuts or metal parts, please feel free to contact us. Sibaicnc is a professional custom nut manufacturer, we provide machining precision,nuts custom, precision cnc machining service, etc. For more information, please feel free to contact us!

Sibai provide custom plastic washers from almost any material: Steel, Stainless Steel, Aluminum, Brass, Copper, Titanium, Nylon, Acetal, PTFE, Fiberglass, Rubber and more. The finishing capabilities Sibai can provide are Heat treating, Plating, Flattening, Painting, Grinding, Coating, Forming, Tapping, Notching, Chamfering, etc. Customized Washers Features Washers are one of the most basic mechanical components along with nuts and bolts. They can be used to distribute pressure, take up space, position items along a shaft, prevent a screw head from slipping through a larger hole, etc. A washer is a sealing part that can fill the gap between two mating surfaces to allow two workpieces to engage with each other without leakage even when subjected to compression force. The washer can fill in irregular parts of the surface, thus allowing some imperfections in the joint surface of the workpiece. Custom stainless steel washers can be made from almost any material: Steel, Stainless Steel, Aluminum, Brass, Copper, Titanium, Nylon, Acetal, PTFE, Fiberglass, Rubber and more. Washers are generally made of sheet cutting. The finishing capabilities Sibai can provide are:Heat treating, Plating, Flattening, Painting, Grinding, Coating, Forming, Tapping, Notching, Chamfering. If you need a custom brass washers with specific dimensions, material etc., Sibai is ready to assist you on designing the most optimal spring solution. Specified and hard-to-find materials including low carbon, cold rolled strip and sheet steel, SAE 1050, 1075, and 1095 spring steel, blue and black temper spring steel, low alloy steel sheets, brass, copper, nickel silver, beryllium copper, phosphor bronze, stainless steel, aluminum and several non-metallic materials such as acetal, PTFE, polyester, nylon, fiber, polyethylene, and various phenolics. Custom copper washers are widely used in power generation, metallurgy, shipbuilding, petrochemical and other industrial applications of water, steam, oil and other media sealing pipe flanges, valves, heat exchangers, pressure vessels, mechanical equipment and engines, compressors, internal combustion engines, machinery, instrumentation, heating and other industrial equipment. Washer series: metal wound washer, large diameter metal wound washer, high strength graphite composite washer, metal coated washer, ptfe washer, modified PTFE washer, metal wound washer, wave tooth washer, tooth shape washer, copper washer, asbestos washer, non-asbestos washer, etc. Pangen series: aramong fiber pangen, high water base pangen, carbon fiber pangen, polytetrafluoron pangen, high carbon fiber pangen, ceramic pangen, graphite pangen, oil-soaked cotton yarn pangen, oil-soaked cotton linen pangen and various pangen rings, etc.. Sibai can provide according to customer demands. At the same time, Sibai is also specialized in the production of PTFE plate, PTFE car pin board, PTFE stair board, PTFE expansion board. The modified PTFE board can be tailored according to customer needs. Our products are widely used in various fields of national economy, such as national defense, electric power, machinery, petroleum, chemical industry, metallurgy, paper making, shipping, transportation, etc. If you have production needs for customized washers, please contact me for a quote. Thanks. Sibaicnc, as an excellent precision machining suppliers, offers a wide range of precision cnc machining, for you to choose from.

Sibai doesn’t focusing on production bolt and pins. But if customer requires, we can help purchase from Chinese supplier. Besides this, Sibai can produce the custom stainless steel bolts or pins according to customers specific designed drawings. Sibai custom bolts and fasteners Features Bolt is a cylindrical threaded fastener with a nut. A type of fastener consists of a head and a screw (a cylinder with an external thread), which needs to be matched with a nut to fasten. Pin is used to position and fasten components. There are two types, cylindrical and conical. The installation of pins generally adopts two methods, press-in method or knock-in with soft metal. Pins are usually conical, pointed or pointed wood or metal pegs, to nail or fasten or to fill holes. Sibai doesn't focus on production custom carriage bolts and pins. But if customer requires, we can help purchase from Chinese supplier. Besides this, Sibai can produce the custom eye bolts or pins according to customers specific designed drawings. There are several processings: Head forming processing: The inner end side of the high-strength bolt and the center line of the rod have verticality requirements, generally between 0.04- 0.10mm. In order to ensure the tensile strength of the high-strength bolt, the inner end face is required to be chamfered R, value generally R1 ± 0.5. Rod processing: external surface processing by turning and grinding, the semi- finishing accuracy can reach IT10-IT9, and the surface roughness value can be Ra 6.3 - 3.2um. Cylindrical grinding is the main method of cylindrical finishing, generally after heat treatment. Thread processing: There are several ways to produce thread, turning, milling, grinding, rolling, etc. For high-strength bolts, we choose rolling threads. Rolling is a chip-free machining process. The thread is formed by cold forming. Rolling has high capacity. Heat treatment: treatment of high-strength bolts (quenching and high temperature tempering). Surface treatment: according to customers requirements, there are several common surface treatment for bolts and pins, dacromet, zinc plating, surface phosphating. Galvanization and phosphating are mostly used in our past production experience. Sibai also exports a large number of fasteners, especially high-strength custom bolts. If you have production needs for custom bolts and pins, please contact me for a quote. thanks. Sibaicnc, as an excellent cnc machining manufacturer, offers a wide range of precision machining for you to choose from.

Product Description Educational ELC Retail Paper Cardboard POP Display Launching New Musical Instruments Quick Details of Educational Learning Musical Instruments POP Display: Display Size W*D*H,750*460*1540 mm, poster height, 150 mm Materials single wall, B-flute cardboard paper Graphic Printing 4C/CMYK, 1 side printed Finish / Treatment after print glossy PP film lamination,eco-friendly Assembly instruction included Accessories no Supportive Capacity 0 kgs, not to load merchandises in display stand Floor Display Specifications: Item No. POP-02144 Description of Stand Educational Learning Musical Instruments POP Display MOQ 200 sets; smaller run acceptable Prototype Lead Time 3~4 days Sample Fees Required and refundable fully Production Lead Time 15 days Display Packaging Details: Packed Box Size 42"x 34"x 5" Packaging Method Flat Packed, 5pcs per carton Gross Weight of Display 16.6 KGS Applications: This floor standing display is used for promoting new products during Joseph Joseph's promotional activities. Other applications of POP display units, for example: 1) Generic Retail Packaging ♦ International cosmetics brands, MAYBELLINE, Covergirl, L'Oreal SA, Sally Hansen, NIVEAetc. apply multi-types of POP displays to enhance their brand visual image and influence, to explore more attractive retailing experience 2) Exhibitions ♦ A big and important event to exhibit the company, new developed items, more creative ideas of showing a big picture of your company Competitive Advantages of Popdisplay Pro Company: ① As less as 1 unit to order ② Diverse design structures ③ Quick response to your query ④ Fast , efficient & safe shipment / delivery ⑤ As fast as 10 days to deliver a rush order ⑥ Internationally famous brand served experience ⑦ Experienced in quality color control system ensuring the original color designed.

P5 320 x 160 mm LED digital pole sign screen display for advertising P5 LED digital pole screen Features: Can be use 3G transmission Can be group send and group receive Can be broadcast synchronous Can relieve the fatigue of the drivers on the viewing good waterproof ability, front and back IP65 Can be used 3G 4G WIFI USB control P5 LED digital pole screen Parameters: Items P5mm Pixel 1R1G1B Configuration SMD2727 Pixel Pitch 5mm Pixel Density 40,000 Module Size(mm) 320x160 Pixels/Module 64x32 Brightness 4800cd/m2~5500cd/m2 Viewing Distance >5m Power Max: 1300 Consumption(W/m2) Ave: 300 Driver Mode 1/8 scan Viewing Angle H: 120°; V: 120° Cabinet Material Cold Rolled Steel or aluminium Refresh Rate 300-3000HZ adjustable LED Life 100,000 hours Supply Voltage AC220V/60HZ; Operating Temperature -20℃ ~ +50℃ Operating Humidity 10% - 90% Gray Scale Red, Green and Blue each 16K Display Color 4096 Billion IP Rating Front IP65 Display Capability Text, Graph and Video Notes: Specifications are for reference only. Please contact our salesperson for details. All rights are reserved to Led World. Application: Suitable for highway, street on both sides of the light pole installation use. Due to the characteristics of synchronous reception and playback of the road light pole screen, it is always accompanied by street light screen playing content no matter how far the vehicle is. Light pole screen not only has unique advantages in road guidance, road condition broadcast, information release, advertising promotion and other aspects, but also plays a considerable role in relieving the fatigue driving of automobile drivers on the highway.

This product can be used for field work, especially in high altitude areas, and can be up to 4800meters. It consists of a compressor, filter, molecular sieve adsorption separation device, radiator, control system, flow control system, lithium-ion battery pack, and so on. Main Features of Hpt-10 portable oxygen generators for sale New style with convenient bag; The lightweight design of only 1.95KG; Nearly 4 hours long duration of one battery, 2 batteries totally 8 hours almost; 1-5 gears flow regulation. Hpt-10 portable oxygen generator Advantages  01 Pulse type desgin The device can catch your breath frequency and adjust flowrate accordingly; 02 Stable working performance Using original design micro oil-free compressor, stable working performance; 03 Reducing weight and prolonging service life Using the stretching process tank, automatically filling molecular sieve, reducing weight and prolonging service life;  04 Good performance The adsorption system is controlled by time and pressure, and the parameters can be adjusted according to the maintenance service to keep the performance of the mobile oxygen generator in optimal condition. For more information about mobile oxygen generator cost, please feel free to contact us! If you need any kinds of oxygen machine, please contact us, as a professional oxygen equipment supplier, Canta Medical is willing to offer you high quality products.

Minimum Order: 1 bags

P2.5 P3 P4 P5 High Definition LED Display Flexible Full Color Screen Factory Supplying P2.5 P3 P4 P5 Flexible Full Color High Definition Led Display Why you choose us: 1. High definition, full color, strict quality control for full production process, make our products to be popular among all customers. 2. Our most competitive factory price, with guaranteed quality. 3. Worry-free Service (Save your time and easy of your mind), take good care of your order with all our heart. 4. Quick response with solutions for any your questions. Product Details Item KP2.5 KP3 KP4 KP5 Pixel pitch 2.5mm 3mm 4mm 5mm Module size 320*160mm 240*120mm 320*160mm 320*160mm Module size 128*64 80*40 80*40 64*32 Physical density 160000 dots/㎡ 111111 dots/㎡ 62500 dots/㎡ 40000 dots/㎡ LED type SMD2020 SMD2020 SMD2020 SMD2020 Module power 18w 18w 18w 18w Best viewing distance ≥2.5m ≥3m ≥4m ≥5m Best viewing angle H: 160°; V:160° H: 160°; V:160° H: 160°; V:160° H: 160°; V:160° Driving method (Constant Current) 1/32 Scan 1/20 Scan 1/20 Scan 1/16 Scan Video frame rate ≥60 Hz ≥60 Hz ≥60 Hz ≥60 Hz Refresh rate 1920-3840Hz 1920-3840Hz 1920-3840Hz 1920-3840Hz Brightness ≥800nits ≥800nits ≥800nits ≥800nits Grey Level 12-16bit 12-16bit 12-16bit 12-16bit Ingress protection IP43 IP43 IP43 IP43 Life Time >100,000 Hours >100,000 Hours >100,000 Hours >100,000 Hours The rate <0.0002 <0.0002 <0.0002 <0.0002 P2.5 P3 P4 P5 High Definition LED Display Flexible Full Color Screen 0 P2.5 P3 P4 P5 High Definition LED Display Flexible Full Color Screen 1 P2.5 P3 P4 P5 High Definition LED Display Flexible Full Color Screen 2 Company Profile We are a 14-years leading LED screen manufacturer and supplier in China. After these years of efforts and development, the company have standard workshop and several well-equipped modern automatic assembly line, with Sony high-speed placement machine, Ymaha high-speed SMT machine and a group of professional production equipment.We also have domestic top LED R&D Engineer team to provide professional solutions for cusomers. P2.5 P3 P4 P5 High Definition LED Display Flexible Full Color Screen 3 P2.5 P3 P4 P5 High Definition LED Display Flexible Full Color Screen 4 P2.5 P3 P4 P5 High Definition LED Display Flexible Full Color Screen 5P2.5 P3 P4 P5 High Definition LED Display Flexible Full Color Screen 6P2.5 P3 P4 P5 High Definition LED Display Flexible Full Color Screen 7 Shipping and Package: P2.5 P3 P4 P5 High Definition LED Display Flexible Full Color Screen 8P2.5 P3 P4 P5 High Definition LED Display Flexible Full Color Screen 9P2.5 P3 P4 P5 High Definition LED Display Flexible Full Color Screen 10 Service Content 1. 24-hour hotline service, including counseling and technical guidance. 2. On-line service. 3. Providing free frame structure drawing 4. Free professional technical training 5. Warranty service. 6. Engineering technical service. FAQ: 1. Is the product customizable? Yes, we can customize the product according to customers' needs, you just need to provide the requirements details. 2. Do you test all your goods before delivery? Yes, we have 100% test before delivery. 3. What is the delivery time? Generally, it will takes about 22-24 days after receiving your advance payment. 4.Is it okay to print my logo on your product? Yes that's okay for us, we provide free printing service 5. What is your terms delivery? EXW, FOB, CFR, CIF, DDP, DDU...

Fiber optic pressure transducer PT-01 is used for accurate measurement of fluid pressure such as liquid and gas, it is based on an industrial-grade design and uses a unique pressure elastic element as a sensing substrate, the sensor has built-in temperature compensation FBG, so as to eliminating the environment temperature influence, and get the accurate pressure measurement. The PT-01 is embedded in hydraulic structures, bedrock or installed in piezometric pipes, boreholes, dams, pipes and pressure vessels to measure water pressure of pores or liquid level, it can also be used for dam seepage and seepage pressure monitoring, pressure vessel measurement, oil, water, gas pressure measurement, water level monitoring. Features Of optical pressure transducer PT-01 High precision and reliability Intrinsically safe Wide measuring range Quasi-distributed measurement Built-in temperature compensation Application Of FBG Pressure Sensor PT-01 Pore water pressure, water table depth Dam seepage and seepage pressure Dangerous goods storage tank pressure Tunnel, underground building water level Slope, tailing reservoir groundwater level Specification Of FBG Pressure Sensor PT-01 Parameter Unit Value Center Wavelength nm 1460 ~ 1610 Range MPa 1 ~ 60 Resolution MPa 0.05% F.S. Accuracy MPa 0.5% F.S. Temperature Compensation -- Built-in Material -- Stainless steel or Inconel Dimension mm Φ26 x 137 Installation -- Bolted, Embedded Pigtail Length m Φ3mm armored cable, 1m at single end (dual fiber), or customize Optical Connector -- FC/APC, or customize Operating Temperature °C -20 ~ +80 AtGrating is a professional supplier for optical fiber sensing. AtGrating offers fiber optic filter, fiber bragg grating pressure sensor, sensing fiber, etc. For more information, please feel free to contact us!

Minimum Order: 10 long tons

P10 P8 P6 front service IP68 scrolling led display Outdoor full color led billboard display price Specification Items P10 Outdoor Full Color Module Module Pixel Pitch 10mm Pixel Density (dot/m²) 10000 Pixel Configuration 1R1G1B Packaged Type of LED DIP346/SMD3535 Module Size(mm) 320X320 Module Resolution 32X32 Technical Parameter Brightn , ess(cd/m²) 7000-8000 Max Power Consumption(w/m²) 350 Best Viewing Distance(m) 10-30 Viewing Angle 120°H/120°V Drive Mode Constant Current drive 1/4 scan Driving Driving IC MBI5026 / MBI5024 Frame-change Frequency ≥60 Hz/s Refresh Rate ≥600Hz/s Gray Grade Level 4096 Grades Color 1073741824 kinds of colors Control System Synchronization Control Transmission Distance Reticle≤100M;Multi-mode Fiber≤500M; Single-mode Fiber≤10000M Out of Control Rate≤0.0001 Lifespan ≥100000H Driving Power 5V Working Voltage AC220V±10% 47HZ~60hz Working Temperature -10°C~+55°C Working Humidity 5%RH~85%RH P10 P8 P6 Scrolling Led Billboard Display Outdoor Full Color IP68 1/4s Scanning 0 FAQ 1. What is LED? LED is sanded for Light Emitting Diode, a kind of semiconductor which is used to give and receive the electronic signal into infrared rays or light, using the characteristics of compound semiconductor. This is used for household appliances, remote controller, electric bulletin board, various kinds of automation appliances. 2. What are Pixel Pitch, Pixel Density, LED QTY, and Pixel Configuration? Pixel Pitch is the distance between neighboring pixels. Pixel Density is the quantity of pixels per square meter. LED QTY is the quantity of LED lamps per square. Pixel Configuration is the description of the consistence of a pixel, for instance, we use 1 red lamp, 1 green lamp, and 1 blue lamp to compose a pixel, the pixel configuration is 1R1G1B. 3. What are LED Type, Module size and Module resolution? LED Type is the description of LED lamp, for instance, the brand, the shape in physical, the size of the lamp, etc. Module size is the measurement of a module. Module resolution is the number of pixels per module. 4. What is Drive Method, driving IC and Power supply Drive Method: always we use static, 1/4 scan, 1/8 scan, 1/16 scan, the latter one contributes to less brightness than the former. We always use the static outdoor, and use the different kinds of scan indoor. Driving IC is the generic term for several kinds of IC, that are used to control the LED lamps, and as a bridge between the control system and lamps. Power supply: a kind of device that used as a transfer from 220V AC into 5V DC. It always seems like a box in the cabinet. 5. What is viewing angle? Viewing angle is the maximum angle at which a display can be viewed with acceptable visual performance. It includes horizontal viewing angle and vertical viewing angle.

Fine Pixel Pitch P2 Indoor High Definition Flexible Curve LED Billboards RGB 3 In 1 ♦ What we do ? We are a professional led manufacturer,specialized in this field for 10 years,item mainly cover led displays both indoor and outdoor,OEM and a chain service are all available,quality good and perfect service,you deserve it. ♦ Applications Stage,Sports,advertising,traff , ic,events,stadium,shopping center,airport,exhibitions, car shows, fashion shows, concerts, ceremonies, entertainment,etc. ♦ Our advantages Professional Manufacturer of led display 1. OEM service,No MOQ 2. Easy installation,regular items in Stocks 3. Offering free design drawing as requested. 4. Remote controlling and adjusting are available. 5. Wooden case or flight case,you are the boss. 6. Your reply will be replied within 24 hours. 7. Fast delivery: Usually 6-8 working days 8. Excellent R&D team,factory Price and assure you quality goods. ♦ Product specification Indoor SMD P2 Resolution/mm 2 Pixel configuration 1R1G1B Pixel density/pixels/m² 250000/m2 Module resolution 128*64 Module size/mm 256x128MM View distance 4-500m Single point brightness adjust Can be added Single point color adjust Can be added White balance brightness >8000cd/㎡ Color temperature 6500K-9500K Horizontal view angle 120(degrees) Vertical view angle 60(degrees) Signal Process bit 10 or 16bit Grey process 1024x1024x1024 16834x16834x16834 65536x65536x65536 Control distances Internet cable:100m, multimembrane:500m, monofilm:2km Driving mode Constant driving current Scanning mode (1/32) Frame rate 60Hz Refresh frequency >2500Hz Control mode Computer synchronous Brightness adjusted range Manual, automatic operation, stepless continuous adjusted 255 steps. No grey loss Out of control point <1/10000 Working hours ≥72hours Mean Time Between Failure >5000hours Life time 100000hours Life-all-white(brightness halving) 50000hours Environment temperature range Operating temperature range: -20-45℃ Maximum power:/㎡ <800W Average power:/㎡ <300W Self-check technology LED spot self-check, communications check, power check, temperature monitor(need customization) Remote monitoring Remote supervision and control, record potential fault, send out warning signs to the operators.(need customization) Software environment WindowsNT,Windows1999,WindowsXP Luminous point width between centres Deviation<3% Brightness uniformity <10% Color uniformity(chromaticity coordinate) ±0.003 Power supply request AC85-264V(50Hz-60Hz) Contrast (1000:1) System protection Moistureproof,dustproof,high temperature protection,anti-corrosion,anti-burning,anti-st , atic,anti-vibration Humidity(working) working:10-95% Humidity(storing) storing:10-95% Fine Pixel Pitch P2 Indoor Led Display High Definition Flexible Curve Billboards 3 In 1 0 ♦ Production process: 1) Incoming Inspection→2) SMD→3) Plug-in →4) Wave Soldering→5) After Welding→6) Testing →7) Semi Finished Aging→8) Module Assembly →9) Gluing→10) Finished Aging→11) Detection Finishing Warehousing ♦ Packaging and shipping Wooden case or flight case package are available. Shipping by sea,air or DHL,multiple shipping ways for your choice. Fine Pixel Pitch P2 Indoor Led Display High Definition Flexible Curve Billboards 3 In 1 1 ♦ Why choose us: Continues Quality With more than 10 years experience in led display producing,equipments are updated regularly.What’s more,unique standardized and module production ensure our products continuous quality. Competitive Price With large scale production capacity and professional production technology,our company have built effective modular production.We always stick to promote the technical innovation and reduce cost to benefit customers. Fast Delivery Once we promise the delivery date,we will try our best to fulfill it.Special procedures such as emergency inventory will be used to maintain your uninterrupted supply of the products. Perfect Service Pre-sales:Your purchasing requirements will be highly valued and we’ll recommend suitable products to you. After-sales:We will track the products usage and then constantly perfect our products. ♦ Module: Fine Pixel Pitch P2 Indoor Led Display High Definition Flexible Curve Billboards 3 In 1 2 Our team will be forever here to offer you full supports !!!