Machinery, Equipment & Tools

FGB (SHANDONG) BEARING MFG CO., LTD. Mr. Leo Jiang Marketing and Sales Director WeChat / Whatsapp: +86-187 6957 2768 E-mail : leojiang@fgbearing.com Which is a Professional R&D, production and sales Spherical Plain Bearing (Joint Bearing) manufacturer in China since 2004. The registered trademark is FGB. Sizes ranges from 20mm~320mm, including phosphate and non phosphate products. - Joint (Beef Eye) Bearings - Maintenance Free Radial Spherical Plain Bearings (GETX) - Maintenance Free Inclined Spherical Plain Bearings (GAC..F) - Maintenance Free Spherical Plain Bearings (GX..F) - Tie Rod Ends (Knuckle Heads) - Maintenance Free Tie Rod Ends (Knuckle Heads) 1. Spherical plain bearings : GE, GEH(GEG), GEZ, GE-C, GE-UK, GEEM, GEEW... 2. Rod ends bearings : GK, GF, GAS, GIHNK, GIHOK, GIHRK-DO... 3. Cylinder earring bearing : SK, SF, SIA, SIQ, SIR, SIRN, SIQG, SFEW... Models:GE120ES GE120ES-2RS GE120DO-2RS ID:120 mm OD: 180 mm Width: 85 / 70 mm Weight: 8.25 kg GE20UK-2RS / GE20ET-2RS / GE25UK-2RS / GE25ET-2RS / GE30UK-2RS / GE30ET-2RS / GE35UK-2RS / GE35ET-2RS / GE40UK-2RS / GE40ET-2RS / GE45UK-2RS / GE45ET-2RS / GE50UK-2RS / GE50ET-2RS / GE60UK-2RS / GE60ET-2RS / GE70UK-2RS / GE70ET-2RS / GE80UK-2RS / GE80ET-2RS / GE90UK-2RS / GE90ET-2RS / GE100UK-2RS / GE100ET-2RS / GE110UK-2RS / GE110ET-2RS / GE120UK-2RS / GE120ET-2RS / GE140UK-2RS / GE140ET- 2RS / GE160UK-2RS / GE160ET-2RS / GE180UK-2RS / GE180ET-2RS / GE200UK-2RS / GE200ET- 2RS / GE220UK-2RS / GE220ET-2RS / GE240UK-2RS / GE240ET-2RS / GE260UK-2RS / GE260ET- 2RS / GE280UK-2RS / GE280ET-2RS / GE300UK-2RS / GE300ET-2RS / GE320UK-2RS / GE320ET- 2RS / GE340UK-2RS / GE340ET-2RS / GE360UK-2RS / GE360ET-2RS / GE380UK-2RS / GE380ET- 2RS /

Minimum Order: 50

FGB (SHANDONG) BEARING MFG CO., LTD. Mr. Leo Jiang Marketing and Sales Director WeChat / Whatsapp: +86-187 6957 2768 E-mail : leojiang@fgbearing.com Which is a Professional R&D, production and sales Spherical Plain Bearing (Joint Bearing) manufacturer in China since 2004. The registered trademark is FGB. Sizes ranges from 20mm~320mm, including phosphate and non phosphate products. - Joint (Beef Eye) Bearings - Maintenance Free Radial Spherical Plain Bearings (GETX) - Maintenance Free Inclined Spherical Plain Bearings (GAC..F) - Maintenance Free Spherical Plain Bearings (GX..F) - Tie Rod Ends (Knuckle Heads) - Maintenance Free Tie Rod Ends (Knuckle Heads) 1. Spherical plain bearings : GE, GEH(GEG), GEZ, GE-C, GE-UK, GEEM, GEEW... 2. Rod ends bearings : GK, GF, GAS, GIHNK, GIHOK, GIHRK-DO... 3. Cylinder earring bearing : SK, SF, SIA, SIQ, SIR, SIRN, SIQG, SFEW... Models: GE90ES GE90ES-2RS GE90DO-2RS ID:90 mm OD: 130 mm Width: 60 / 50 mm Weight: 2.75 kg GE20UK-2RS / GE20ET-2RS / GE25UK-2RS / GE25ET-2RS / GE30UK-2RS / GE30ET-2RS / GE35UK-2RS / GE35ET-2RS / GE40UK-2RS / GE40ET-2RS / GE45UK-2RS / GE45ET-2RS / GE50UK-2RS / GE50ET-2RS / GE60UK-2RS / GE60ET-2RS / GE70UK-2RS / GE70ET-2RS / GE80UK-2RS / GE80ET-2RS / GE90UK-2RS / GE90ET-2RS / GE100UK-2RS / GE100ET-2RS / GE110UK-2RS / GE110ET-2RS / GE120UK-2RS / GE120ET-2RS / GE140UK-2RS / GE140ET- 2RS / GE160UK-2RS / GE160ET-2RS / GE180UK-2RS / GE180ET-2RS / GE200UK-2RS / GE200ET- 2RS / GE220UK-2RS / GE220ET-2RS / GE240UK-2RS / GE240ET-2RS / GE260UK-2RS / GE260ET- 2RS / GE280UK-2RS / GE280ET-2RS / GE300UK-2RS / GE300ET-2RS / GE320UK-2RS / GE320ET- 2RS / GE340UK-2RS / GE340ET-2RS / GE360UK-2RS / GE360ET-2RS / GE380UK-2RS / GE380ET- 2RS /

Minimum Order: 50

We are the manufactuer for the belt dryer and box dryer. Attached you can find machine pictures and pls let us know if you have interest to know more details. You can email us your application / capacity request /voltage /frequency etc. via email : Susan205060@hotmail.com Below pls find some basic information about us: 1 - More than 15 years' experience in dryers production line. 2 - We have solid experience to export to USA / UK / New Zealand market etc. 2 - The advantages for our equipment are : heat recycle using and we provide UL certified parts or CE certified parts for the production line. 4-We use international top brand for key parts such as Siemens screen + OILON Burner etc. Testimonials from our existing UK client : The dryer is efficient in drying the flower biomass delicately enough to keep the valuable terpin profiles that we want for extraction, and dry it enough to be stored without having problems with moisture left in the biomass whilst in storage. Service: we have had good service and can always get hold of someone for assistance if required. As of now, we have not had any problems with the function or operation of the dryer. We successfully harvested and dried over 4 tonnes of flower material last season. Bdgs&Tks, Susan Zheng XT Intelligence Technology Co.,Ltd E-mail : Susan205060@hotmail.com Wechat:+86 13671955713 Skype: Susan205060 Cell Phone: 0086-136 7195 5713 https://topqualitybeltdryermanufacture , r.blogspot.com/ https://www.facebook.com/BE , LTDRYERMANUFACTURER (20+) UL/CE parts belt dryer /box dryer Manufacturer - XT Facebook

Bonsai Root Pruning Containers Thickness: 1.0mm Air root pruning pots for tree MARSHINE Air pruning pot is very good for plants growing and large plants transit: Shortening plants' growing cycle , making the pos-management easier , making the lateral roots thicker and short and transiting large plants more easily. The Root Pruning Pot for container is a recyclable, reusable growing system that actively enhances the quality of the root systems of plants.This revolutionary approach to containerizing tree stock produces fabulous, non- spiraling root systems that are impossible to develop in any other available container.   Size Specification: ( Height x Bottom diameter) Type A (15cm/5.91in in diameter and 20cm/7.87in in height) Type B (20cm/7.87in in diameter and 30cm/11.81in in height) Type C (30cm/11.81in in diameter and 20cm/7.87in in height) Type D (30cm/1.81in in diameter and 30cm/11.81in in height) Type E (40cm/15.75in in diameter and 30cm/11.81in in height) Type F (40cm/15.75in in diameter and 40cm/15.75in in height) Type G (50cm/19.69in in diameter and 40cm/15.75in in height) Type H (50cm/19.69in in diameter and 50cm/19.69in in height) MARSHINE Air Pruning Containers Pot Advantage 1. Made of new high-quality PVC material, it is sterile, non-toxic, breathable, cold-resistant, high-temperature resistant, not easy to deform. 2. Save time, effort, and labor, reduce production costs, and can improve production efficiency. 3. Easy management process, high survival rate and fast growth. The total roots are increased by 30-50 times, the survival rate of seedlings is over 98%, the seedling cycle is shortened by half, and the management work after transplanting is reduced by more than 50%. 4. No damage to the root when transplanting, no need to cut the plant head, no season restrictions, convenient transportation. Air Pruning Seed Trays Function 1. Premium PVC: The plant root trainer features the high-quality PVC material, long service life, which can shorten the seedling growth period. 2. Prevent Root Winding: The plant root trainer can make the plant side roots thick and short to prevent the formation of root winding. 3. Improve Rooting: The plant root trainer can effectively control the rapid propagation of root system, which can improve the quality of plant root system, and it can effectively control the rapid propagation of root system. 4. Labor Saving: With the plant root trainer, you can minimize the need for transplanting and reduce excessive watering. 5. Wide Applications: The plant root trainer is perfect for flowers, fruits, seedling transplanting, roadside hedges, tree bonsai. 6. Keep root safety: No damage to the root when transplanting, no need to cut the plant head, no season restrictions, convenient transportation. Bonsai Root Pruning Containers Usage The container is composed of a concave-convex plate with small hole, a bottom and screws. When assembling, the plate with the small hole is outward, the two rows are without hole upward, and the round convex bottom upward, and the pressing is placed on the small Holes in the first row and the second row below the wall, and then press the screw to become a complete container. 1. Place the base of the product on the ground, and then wrap it tightly with the enclosure (the outside of the enclosure protrusion is empty), and clamp the base. 2. Check whether the enclosure is tight, and then tighten the screws in the upper, middle and lower parts of the overlap of the enclosure.  

288 cell plug tray vegetable seedling trays Attribute Material:PET , PVC , PS Thickness:1.0mm Cell Depth:40mm Carton:200PCS 288 Holes Plastic Plant Trays Introduction Plastic Plant Trays of 288 holes are great for vegetables like lettuce and kale, herbs, flowers and other seedlings that can be transplanted early.With our 288 cell seed trays, you'll no longer have to buy seed cell trays each season. Our plug trays are strong enough to be used for many years of growing. Specification: 1) Upper Diame , ter: 23mm/0.94 in 2) Bottom: 10mm/0.39 in< , br>3) Depth: 42mm/1.42 in 4) Shape: 5428cm , / 20.8710.63 in 288 Holes Plastic Seed Trays For Plants Advantages Sufficient Quantity:You will receive 1/3/5/ pack 200 cell plugs seed trays. The sufficient quantity can meet your different needs of planting different plants, like vegetable, flower, fruit and so on. Besides, you also can share these seed starter tray with your friends, enjoying the fun of planting together. High Growth Efficiency Design:Our seed starter tray provides independent growth space for each plant, which can help each plant obtain water and other nutrients better, preventing roots from entanglement. Besides, the tilting design of the cell wall together with the drain hole at the bottom is beneficial for draining, preventing root damage caused by over-watering. Easy to Transplant: Our plug tray nursery is superior to traditional soil cultivation. The root system and aero-garden sponges in the plug tray connect firmly, not easy to spread. Because of aeration designing, your seedling is more likely to survive in the transplanting process, making transplant easier after it becoming stronger. BPA Free Material:The material of our seed starter tray is super thickened plastic BPA free, which is durable, safe and eco-friendly. Due to the high quality material, you can feel free to apply our product for starting your lovely plants without any burden and keep them available for years. 288 Cells Reusable Plant Water Trays Main Functions 1. Made of plastic material, durable and reusable, UV resistant for years. 2. Perfect for gardeners, growers, and farmers. A great way to foster a beautiful and healthy garden. 3. Seedling tray with material won't crack or break during transport made out of extra strength BPA free - food safe plastic. 4. Each Cell has a large drain hole in the bottom for proper drainage. Provides gentle warmth to the plant bed and balances moisture levels. 5. Extra strength propagation trays allow roots to grow through. Makes great germination station. 6. Ideal cell size to maintain ideal temperature and optimal root growth, plant development and seed germination. 288 Cells Rectangular Plant Trays Usage 1. Place a piece of hard paper or plastic under the nursery basin, then fill the nursery pot with soft, nutritious soil (do not use hard soil) and squeeze the soil with your fingers to squeeze the soil and soak the soil. 2. Sprinkle seeds in each tray (one to two seeds, three to five seeds). 3. Sprinkle seeds on the thin nutrition soil, so that the seeds can not see the light on the line. 4. Spray water, spray water sooner or later each day afterwards, so that the soil to keep moist. 5. When the seedlings grow to three or four leaves, with your fingers gently toward the bottom of the nursery basin at the top of a hole, Miao Miao and even the root of the soil properly settled out, you can directly move to dig a good pits of the basin This transplant seedlings do not hurt the root, easy to survive. 288 Cells Plastic Plant Trays Specifications Specification Model No. MS-288 Cell No. 288 Configure 12 24 Top Cell Size (mm) 1919 Cell Volume (cc) 7 Down Cell Size (mm) 88 Cell Height (mm) 37 Tray Size (mm) 540 280 Material PVC/PET/PS Seed Planting Trays Components & Packaged Item No. Sheet Thickness (mm) Weight (±5g) PCS/CTN 20GP 40GP 40HQ CBM/CTN MS-288 1.3mm 200 100 310 630 720 0.0596 1.2mm 185 140 310 630 720 0.0596 1.0mm 155 160 310 630 720 0.0564 0.8mm 125 200 310 630 720 0.0564 Marshine is a professional plant seedling trays manufacturer, we can provide plastic plant trays wholesale. Our products uesd in horticultural, agricultural and garden supplies and accessories.

Farm-Use Simple Fish Feed Production Line_40-300kg/h Production line / By Lima / Farm-use, Feed pellet production line, Floating fish feed pellet machine, Floating fish feed pellet production line / 2 Comments Lima farm-use simple fish feed production line was designed for the small fish farms, it has the advantages of low investment cost, high economic benefit, and good feed quality. This farm use production line can meet the production of fish feed pellets with only four machines: Raw materials crusher, mixer, fish feed pellet machine, and fish feed pellet dryer. This small agricultural production line not only greatly reduces the cost of feed pellet production, but also can better ensure the quality of fish feed pellets, which is the best choice for small fish farms. Table Of Contents Video display of the farm-use fish feed pellet production line The main equipment in the farm-use fish feed pellet production line 1. Raw materials crusher 2. Grain powder mixer 3. Floating fish feed pellet machine 4. Small vertical dryer 5. Optional equipment Features of the farm use fish feed production line Video display of the farm-use fish feed pellet production line The main equipment in the farm-use fish feed pellet production line The equipment used in this farm-use fish food pellet production line includes raw material crusher, mixer, fish feed pellet machine, and small vertical dryer. Customers can add auxiliary equipment according to their own needs such as the seasoning machine, screening machine, packaging machine, etc. Farm use fish feed pellet production line Farm-use fish feed pellet production line The output of the entire production line is 40-300kg/h, it needs manual feeding, material transfer, discharge collection and other steps. But customers can also add some conveying equipment to make it a fully automatic production line to obtain higher working efficiency. Get Price Now! WhatsApp Me Now! 1. Raw materials crusher Self-priming disc crusher This is a self-priming disc crusher equipped with a dust removal device. The user only needs to put the suction mouth against the grain raw material, and it can grind it to 10-200 mesh. The output of this grinder can reach 200-800kg/h, the structure is simple, and it is easy to use, which is very suitable for small farms. 2. Grain powder mixer Vertical mixer The crushed grains need to be stirred by a mixer. During this process, some nutritional supplements can be added according to the formula of fish food pellets. The output of this small mixer can reach 60kg-500kg/h. 3. Floating fish feed pellet machine Fish feed pellet machine This fish food pellet machine is our most popular product, and the power mode can be either a diesel engine or a motor. The fish feed processed by our floating fish feed pelleting machine has the advantages of high hardness, smooth surface, complete internal ripening, good palatability, etc. 4. Small vertical dryer Vertical dryer The produced fish feed pellets need to be cooled before putting into use. This small vertical dryer adopts the method of internal circulation of the fan cold air to quickly cool down the feed pellets. Users can choose drying equipment according to their own needs. Generally speaking, the quality after drying by this machine is better than natural drying. 5. Optional equipment Get Price Now! WhatsApp Me Now! For the farm-use small unit production line, from the perspective of cost control, there is not much auxiliary equipment required. But for some special fish species farming, seasoning machines may be necessary, which is conducive to the growth of fish. Seasoning machine Seasoning machine Screw conveyor Screw conveyor Users can also choose to add conveying equipment to save labor, and only need a few screw conveyors to make it a fully automatic production line. Features of the farm use fish feed production line Farm use fish feed production line Farm use fish feed production line Low-cost investment, high economic benefits, and can better ensure the quality of the finished feed pellet. The structure of the production line is simple, and the user can get started with it easily. Small footprint, no need to specially design plant installation drawing. High flexibility for demand increases and decreases, even if production demand is greatly reduced, it is easier to generate profits because of the low cost. It is also easier to add new equipment when demand increases significantly.

Minimum Order: 1 bags

How to make floating fish feed? News / By Lima / Leave a Comment Fish feed floats on the water face due to colorful reasons like low bulk viscosity, air sacs in extruded feed, low humidity, buoyancy – water stability & other extrusion properties nominated as floating fish feed. Ingredients selection has a tremendous impact on final product texture, uniformity, extrudability, nutritive quality, and profitable viability. Within certain limits set by a nutritionist, the extrusion cooking process can produce a wide range of products. In general, during the extrusion cooking of cereal grain and protein composites, the moistened grainy or powdery accouterments are converted into dough. The stiff factors gelate, performing in a substantial uptake of humidity and an increase in dough density. The part of many component properties like starch, protein, fiber & fat. Table Of Contents Why making floating fish feed pellets How To Make Fish Feed Pellets Floating? Main constituents used for floating fish feed & Fish feed formulation Why making floating fish feed pellets Floating fish feed pellet machine Floating fish feed pellet machine Get Price Now! WhatsApp Me Now! Before talking about how to make floating fish feed pellets, let us talk about why making floating fish feed pellets? First, we need to know about the advantages of floating fish feed pellets. generally speaking, floating fish feed has numerous advantages over sinking feeds. The raw material is propelled by the screw along the barrel of the extruder and cooked at 120- 175 °C for about 30 seconds, the floating fish feed pellets are easier to digest as a product of the cuisine process, and heat and stress will also inactivate and destroy enzymes. The increased bounce gelatinization helps the feed stabilize further in the water because it breaks down more sluggishly, giving the fish enough time to finish eating. How To Make Fish Feed Pellets Floating? High Starch Gelatinization Substantially used for carbohydrates & important sources of energy in livestock feed. When gelatinization occurs during extrusion cuisine, starch becomes answerable and absorbs large amounts of water. Starch also contributes to both expansion and list in the final product, especially important for aquatic feed. Floating fish feed needed a minimum of 20% starch in the formula. High quality catfish feed pellet High-quality catfish feed pellet After the raw accouterments are treated at high temperatures, the starch gelatinization degree can be increased by 80- 99%, and the aquatic fish are easy to digest. Main constituents used for floating fish feed & Fish feed formulation Raw accouterments of floating fish feed substantially include fish meal, fish oil,de-oiled galettes, minerals & vitamins-mix. Starch, Protein, fat & crude fiber are major composites of fish feed constituents. Floating fish feed extruder by dry way Floating fish feed extruder by dry way Indeed though extruder conditions have an influence on whether a product floats or sinks, the primary influence is controlled by the formulation itself. High situations of fat will ensure that the product will sink. High situations of starch, or the addition of gelatinizable protein sources in the raw feed formulation, help to ensure that the prod­uct will float. When banishing a shaped product it’s important that the quantum of expansion be controlled so that the product doesn’t puff further than asked or lower than asked or come distorted due to erratic puffing. In addition, the product should have a structure compatible with the mouth feel asked in the final product. This is shown not only in the extruder but also by the exit humidity of the particles and by the knife operation.

Minimum Order: 1 bags

Rapid developments of fish farms in Indonesia News / By Lima / Leave a Comment Indonesia is an archipelago consisting of 17,000 islands, with a coastline of about 81,000 km. Coupled with a warm tropical climate all year round, the potential for aquaculture is vast. Even as the country only utilizes 7.38% of its total potential area for aquaculture, it already ranks among the most productive countries in aquaculture production. Table Of Contents Rapid developments of fish farms in Indonesia Introduction of the fish farming industry in Indonesia Challenges need to be solved in aquaculture farming Rapid developments of fish farms in Indonesia The main growth driver for Indonesia’s fisheries is the fact that key commodities such as fish and shrimp continue to enjoy strong demand domestically and abroad respectively. The main domestic factor is the fact that the archipelago nation of more than 250 million people is a major consumer of fish. Fish consumption per capita was estimated at 33.76 kg/year in 2014. Thanks to the wide coastline and warm tropical climate, Indonesia has become one of the top 4 nations in fishery production. With the growth of capture fisheries stagnating, further growth has to increasingly depend on the nation’s aquaculture fisheries, which comprise mainly shrimp, fish, and seaweed. Introduction of the fish farming industry in Indonesia The main growth driver for Indonesia’s fisheries is the fact that key commodities such as fish and shrimp continue to enjoy strong demand domestically and abroad respectively. The main domestic factor is the fact that the archipelago nation of more than 250 million people is a major consumer of fish. Fish consumption per capita was estimated at 33.76 kg/year in 2014. Thanks to the wide coastline and warm tropical climate, Indonesia has become one of the top 4 nations in fishery production. Indonesia is the largest economy in South East Asia with a relatively young, fast-growing, and increasingly urban population of over 260 million people. The country has tremendous potential to be a leading global seafood player and the Indonesian Ministry of Marine Affairs and Fisheries has the ambition to increase sustainable aquaculture production and reduce prices to make fish affordable for a larger part of the Indonesian population. Fish farming Fish farming in Indonesia Aquaculture is one of the fastest-growing sectors globally. Indonesia is among the top three largest aquaculture producers all across the world. As per the reports available, the country earned approximately USD 4.24 billion by exporting fish and fishery products to other nations in 2014. Aquaculture has been growing leaps and bounds, and national production targets are increasing every year. Today, innovative practices are inevitable to achieve rapid expansion of aquaculture and meet the growing demand. According to the United Nation’s Food and Agriculture Organization, the most essential aquaculture species include Seaweed, Nile Tilapia and Shrimp. The Indonesian government has played a vital role in the expansion of the aquaculture sector by drafting strong policies that support the sector. Different areas where the national government has contributed massively include infrastructure, entrepreneurship, technology, environmental issues and production systems. Tilapia species and its production remain the key area of focus for the government. Challenges need to be solved in aquaculture farming Although the aquaculture sector is growing in Indonesia, there are several challenges that need to be resolved as well. The traditional form of capture fisheries still follows fishing methods that are unsustainable in the long run. Additionally, poor management has been causing various problems like water pollution and expenses. Another issue that needs a solution is overfishing which can be detrimental to the environment. Fish farming Fish farming in Indonesia In aquaculture, one of the major concerns for fish farmers in Indonesia is the high cost of feed. Also, the cost incurred due to infrastructure requirements is not proportional to profits most of the times. Another common problem that plagues aquaculture systems are diseases that reduce quality and productivity of the output. Land use and water exchange are other issues that need urgent solutions.

Minimum Order: 1 bags

What are the qualities of a good fish feed? News / By Lima / Leave a Comment When opting for feed, fish growers should pay attention to three crucial characteristics structure, size and stability. Visually, the structure of the pellet should be firm and robust. A strong pellet must repel the manufacturing and transportation process, minimizing the quantum of dust produced. Dust is extremely dangerous to grope, as it can damage their gills and affect the water quality. The size, ratio and sink/ float speed of the feed must also be suitable for different species and surroundings; Pellets must also have high water stability, as uneaten feed can pollute the water and leach nutrients. Following best practices, uneaten pellets must be removed instantly in order to avoid sub-optimal feeding practices, negative environmental impacts, and a decreased feed conversion rate. Table Of Contents The physical attributes of a good feed The physical quality of fish feed The nutritive quality of fish feed Recovery of essential amino acids and specific vitamins. Digestibility The physical attributes of a good feed The constituents used in the feed should be finely ground. The pellets will have an even color. The feed must be without fines or dust. However, too much will be wasted in the form of a powder that floats on the water face, If too numerous fines are in the feed. The pellet should be firm with water stability of at least 30 minutes. The pellet’s water stability refers to the time it takes for the pellet to fully fall piecemeal into water. Proper cuisine assures that the starches have Gelatinized and this helps hold the pellet together. Floating fish feed pelleting machine Floating fish feed pelleting machine Get Price Now! WhatsApp Me Now! The pellets should be of the invariant size and of the correct size so the fish can swallow them. A size of about ¼ the gape of the mouth is advised. The feed should be palatable to the fish with a good taste, smell, and feel. Fish will spear out or only sluggishly consume feed that isn’t palatable. The physical quality of fish feed Floating fish feed pellet Floating fish feed pellet Density Quality food doesn’t contain numerous fine particles. The volume of these particles must be measured in each batch of bought food. After screening the food, the residue( dust) must be counted and mustn’t exceed 1% of the total weight of the tried bag. Shape and size Uniformity Durability Water stability It’s important that the food has good stability in the water, so that it’s visible to grope, this flotation or stability depends on the content of fat in the food and its processing at extrusion. The nutritive quality of fish feed Recovery of essential amino acids and specific vitamins. It’s important to know each species you have with your breeder because each fish has nutritive requirements and behavior during feeding. It’s necessary to have information similar to the species of fish raised, its feeding behaviour, feeding habits, pond size, grazing viscosity, temperature, and water quality. High quality catfish feed pellet High quality catfish feed pellet Digestibility Another important fact, which has not earned the attention of aquatic feed manufacturers, is related to nutrient digestibility. The better the Digestibility of the feed factors, the more effective the feed is and the more fish are released, which will contribute to the respect of the aquatic environment Lima machinery has been in the fish feed pellet industry for nearly ten years, focusing on the production of fish food extruded pellet machines. In addition, our factory has dozens of different fish feed pellet production line solutions for customers to choose from. After continuous communication with customers, our feed pellet machine has received praise from customers, especially those in Africa and South Asia. If you have any questions, please feel free to contact us, our professional technicians are more than happy to help you.

Minimum Order: 1 bags

How to produce fish feed pellets in Nigeria? News / By Lima / Feed Formula, Feed pellet solutions, Fish feed, Floating fish feed pellet / Leave a Comment Just like other animals, fish requires a feed formula that contains protein, carbohydrates, lipids, minerals, and vitamins for healthy growth. Fish requires mostly protein in their feed. Lima feed machinery has been working in the feed farming industry for more than ten years, as the professional manufacturer and exporter of feed equipment. We specialize in the production of fish feed extruders, poultry feed pellet machines, and corresponding production lines. If you have any questions about the feed pellet industry, please feel free to contact us. Table Of Contents The major ingredients used for fish feed production include Feed Formulation Procedure Guides on How to Produce Fish Feed in Nigeria The major ingredients used for fish feed production include Carbohydrates substance from grain Rice Bran: The bran layer and germ of the rice are rich in fat, and are good for fish food. Fish Meal: It is produced by cooking fish, rolling and pressing to remove water and oil, and then drying. This ingredient is responsible for the protein supplementation in the fish feed. Soybean Meal: This is the major source of protein in the fish feed formulation, it is especially high in essential amino acids, is palatable, and can easily be digested by fish. Groundnut Cake: This can be included in place of soybean in the feed. It supplies amino acids. Cottonseed Meal: It is highly palatable and contains about 40% protein. Maize: This is the major source of carbohydrate in the fish feed formulation and accounts for up to 30% of the total diet Other ingredients include wheat offal, vitamins, growth boosters, crayfish dust, cassava, palm oil, eggs, salt, etc. Feed Formulation Procedure These ingredients are used based on the feed formula chosen. Depending on the kind of feed required, pelleting or extrusion can be used. The process whereby food ingredients are forced to flow under conditions of mixing, beating, and heating, through a die that forms the ingredient is known as Feed extrusion. Extruded floating feeds are favored by farmers in Nigeria because they allow observation of the feeding processing thereby preventing wasteful feeding. If it is done by pelletizing, the pellets sink rapidly when thrown into the pond, pollute the water, and crumble, thus leading to wasteful feeding. If you want to know more about feed pellet formula knowledge from this article: How to design a suitable fish feed pellet formula in the different fish growth stages? Guides on How to Produce Fish Feed in Nigeria Nigeria is our largest market, we have a lot of local customers, if you need to visit our fish pellet equipment, we can provide you with contact information. In addition, the production of fish food pellets in Nigeria is also very promising, and good economic benefits can be obtained whether it is used by itself or sold. These ingredients are mixed in their right proportion by a feed mixing machine. It is then transferred to a feed pelleting machine which cuts the feed into desired sizes. The feed is then dried using a feed drier. Once properly dried, it is stored in a cool and dry place to avoid damping the feed which may infect the feed and render it no longer useful. Floating fish feed pellet production line Floating fish feed pellet production line The summary of the process is as follows: Fish feed grinding – Feed mixing – Feed extrusion – Pellet drying – Oil spraying – Pellet cooling – Packing

Minimum Order: 1 bags

What are the defects of extruded feed pellet during processing? After years of practical experience in production and continuous communication with customers, we have summarized the following twelve common problems and corresponding solutions for customers’ reference. The size and length of the feed pellets are uneven; Too many pores in the feed pellet; Feed pellets deformation; The hardness of the feed pellet is not enough; Poor water resistance and poor viscoelasticity in feed pellets; The feed pellet incision is irregular and oblique; Low feed pellet expansion; The feed pellets do not float; Feed pellets have different sizes at both ends; The feed pellets form a double-cut inner concave shape; Feed pellets with tails; Peeling on the feed pellet surface; https://www.limafeedpelletizer.com , /problems-and-solutions-in-the-production-of- t , he-floating-fish-feed-pellet/

Minimum Order: 1 bags

Four aspects need to be paid attention to when feeding fish with pellet feed News / By Lima / Feed Formula, Feed pellet solutions, Fish feed, Floating fish feed pellet / Leave a Comment When feeding fish with fish pellets, we need to pay attention to the following issues: water quality and dissolved oxygen in the fish pond, properly adjusting the feeding amount, choosing pellet feeds of different diameters, and pay attention to supplementing vitamins and other substances. Lima machinery has been in the fish feed pellet industry for nearly ten years, focusing on the production of fish food extruded pellet machines. In addition, our factory has dozens of different fish feed pellet production line solutions for customers to choose from. After continuous communication with customers, our feed pellet machine has received praise from customers, especially those in Africa and South Asia. If you have any questions, please feel free to contact us, our professional technicians are more than happy to help you. Table Of Contents 1. Pay attention to the water quality and dissolved oxygen in the fish pond 2. Pay attention to adjusting the feeding amount 3. Pay attention to choosing pellets of different diameters 4. Pay attention to vitamin supplements 1. Pay attention to the water quality and dissolved oxygen in the fish pond It is found that the water quality has deteriorated, and water should be added in time to improve the water quality of the fish pond. The dissolved oxygen per liter of water in a fish pond is generally required to be above 4 mg. If it is less than 4 mg, oxygen should be added to the fish pond. Water treatment schemes for fish seedling fields (3) Water treatment schemes for fish seedling fields 2. Pay attention to adjusting the feeding amount The feeding amount should be appropriately increased or decreased according to the change in water temperature because the water temperature is related to the food intake of the fish. The high water temperature causes the fish to eat more food, and vice versa. The water temperature is above 10℃, and the feeding amount can account for 3% to 4% of the total weight of the pond fish. 3. Pay attention to choosing pellets of different diameters Fish of different sizes should be fed pellets of different diameters. Generally, fish with a body length of 4 to 6 cm should be fed pellets with a diameter of 0.5 mm; for fish with a length of 7 to 8 cm, pellets with a diameter of 3 mm should be fed. Different fish feed pellet Different fish feed pellet 4. Pay attention to vitamin supplements This is because the vitamins are destroyed during the production of pellet feed. Therefore, when using pellets to raise fish, a small amount of vitamin- rich green feed should be fed to supplement the deficiency of vitamins.

Minimum Order: 1 bags

4 row corn planter is now the main agricultural machinery in agricultural activities. There are a wide variety of corn planters in the market today. Such as hand-held corn planters and tractor-driven corn planters. Among them, corn planters driven by tractors are suitable for large-scale corn cultivation. Because farmers with large areas of corn will choose tractor-driven corn planters. And this model of corn planter can sow multiple rows at the same time, with high work efficiency. In addition to the function of sowing, the machine can also fertilize while sowing, saving people’s energy for fertilizing.

Minimum Order: 1 bags

How to choose right feed pellet for your fish farming? News / By Lima / Leave a Comment How to choose the applicable fish feed is veritably important for growers. Because purchasing of feed is the largest proportion of the cost in the entire process, it’s the key to gaining the profitable benefits of fish culture. The cost of fish feed accounts for a large proportion of fish growers’ products. Feed pellets are extensively used in fish husbandry. Choosing the right quality fish feed pellets can ameliorate feed application, growth rate, and vulnerable system, and prevent diseases. thus, fish growers must learn how to choose suitable fish feed pellets. Table Of Contents Feed quality must meet the ensuing conditions. How To Choice Right Feed Pellet? Chooses a large-scale factory with good specialized service Pay attention to feed security Control the number and amount of feedings Choosing dependable feed pellet manufacturers Pay attention to the shelf life of the feed pellet Feed quality must meet the ensuing conditions. Floating fish feed pellet production Floating fish feed pellet production The feed must be nutritionally complete, including a complete vitamin and mineral premix. The protein content of the feed is generally 32- 36%. Protein-rich feed costs more, but is worth the plutocrat, especially if the average fish weighs no lower than 50 grams. The quality of feed will drop with the extension of storehouse time. The feed should be used up within 6 weeks after the product, if the storehouse time is too long, its vitamins and other nutrients will be lost, or destroyed by fungi and other microorganisms. How To Choice Right Feed Pellet? Chooses a large-scale factory with good specialized service Firstly, the selection of product enterprises chooses a large-scale factory with good specialized service, good character, and strong specialized force. These enterprises have strong fiscal and specialized strength to ensure that the product of feed formula and nutritive balance, conducive to the digestion and immersion of the object, and promote their growth. At the time of purchase, to see the markers on the packaging, like name, nutritional constituents, product date, shelf life, etc. High quality floating fish feed extruder High-quality floating fish feed extruder Get Price Now! WhatsApp Me Now! Lima feed machinery has been working in the feed farming industry for more than ten years, as the professional manufacturer and exporter of feed equipment. We specialize in the production of fish feed extruders, poultry feed pellet machines, and corresponding production lines. If you have any questions about the feed pellet industry, please feel free to contact us. Pay attention to feed security Second, we must pay attention to security. That’s to say, we should test whether the fish feed pellets add harmful additives or not. Or differently, the fish will have an unattractive body shape and indeed impact our health seriously. Control the number and amount of feedings Third, the fish do not have a stomach, so the feed pellets stay in the intestinal tract for a short time, causing the feed pellets to have low effectiveness. So in the fixed gross, we should increase the feeding times and reduce the quantity of the feed pellets. Choosing dependable feed pellet manufacturers Fourth, the dependable feed pellet manufacturers. The companies with large scale and good character have strong technology strength to insure balanced nutrition and scientific feed formula. Fish growers should buy the feed pellets produced by dependable manufacturers. Factory display Factory display Pay attention to the shelf life of the feed pellet Fifth is the manufacture date of the feed pellet. Feed pellets that exceed the shelf life will reduce the nutrition contents and have a bad influence on fish. Fish growers should insure the feed pellets can be finished within the manufacture date. Choosing the wrong size or type of feed won’t only increase feed waste, affect fish health, but also beget water pollution. thus, it’s veritably important to choose the right fish feed product machine to make the most suitable fish feed size and type. https://www.limafeedpelletizer.com/how-to , -choice-right-feed-pellet-for-your- fish-farmin , g/

Minimum Order: 1 bags